Green interlocking paving units
Source abstract
Abstract
Abstract Our research produced ultra-lightweight green interlocking paving units through combined usage of sawdust and laterite as partial cement and fine aggregate replacements respectively. Interlocking paving units, water-cured for 90 days at optimum 10% sawdust content, achieved compressive strength of 16.6 MPa and skid resistance of 64.5 PVT, which exceeded the minimum requirements of 3.45–15 MPa and 45PVT respectively. The developed ANN model was classified as very good in terms of prediction efficiency of compressive strength (CS) and skid resistance for different curing media based on Nash & Sutcliffe criterion of efficiency (NSE). However, the prediction efficiency for CS was better than SR in terms of NSE, root-mean-square error (RMSE) and mean-square error (MSE), and was able to capture the interactive effects of considered factors. In line with ANN results, CS and SR increased with curing age but decreased with increasing sawdust content. In terms of durability performance and compressive strength development, the preferable order of curing media is water > laterite > alkaline > acid. Multi-criteria evaluation of ANN models is recommended for better interpretation of model efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Durability, efficacy and performance of bio-based construction materials: standardisation background and systems of evaluation and authorisation for the European market
2. The effects of by-products incorporated in low-strength concrete for concrete masonry units10.1016/j.conbuildmat.2017.07.086 ↗
3. Strength and micro-structural properties of self-compacting concrete containing metakaolin and rice husk ash10.1016/j.conbuildmat.2017.09.088 ↗
4. Reduction in environmental problems using rice-husk ash in concrete10.1016/j.conbuildmat.2011.11.028 ↗
5. Towards a more circular construction sector: estimating and spatialising current and future non-structural material replacement flows to maintain urban building stocks10.1016/j.resconrec.2017.09.022 ↗
6. Environmental evaluation of green concretes versus conventional concrete by means of LCA10.1016/j.wasman.2015.06.035 ↗
7. SDA and laterite applications in concrete: prospects and effects of elevated temperature10.1080/23311916.2017.1387954 ↗
8. Green concrete: prospects and challenges10.1016/j.conbuildmat.2017.09.008 ↗
9. Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials10.1016/j.conbuildmat.2016.12.055 ↗
10. Recycle option for metallurgical by-product (Spent Foundry Sand) in green concrete for sustainable construction10.1016/j.jclepro.2017.10.255 ↗
11. Mechanical properties of green structural concrete with ultrahigh-volume fly ash10.1016/j.conbuildmat.2017.04.188 ↗
12. Pozzolanic reactivity of ultrafine palm oil fuel ash waste on strength and durability performances of high strength concrete10.1016/j.jclepro.2016.12.121 ↗
13. Properties of concrete containing waste glass10.1016/j.cemconres.2003.07.003 ↗
14. Plastic waste management in construction: technological and institutional issues10.1016/0921-3449(95)00034-8 ↗
15. Development of sandwich composites for building construction with locally available materials10.1016/j.conbuildmat.2017.04.113 ↗
16. Building houses with locally available materials in Ghana: Benefits and problems
17. A comparative life cycle study of alternative materials for Australian multi-storey apartment building frame constructions: environmental and economic perspective10.1016/j.jclepro.2017.08.065 ↗
18. Fresh properties, mechanical strength and microstructure of fly ash geopolymer paste reinforced with sawdust10.1016/j.conbuildmat.2016.02.091 ↗
19. Skid resistance determination for pavement management and wet-weather road safety10.1016/j.ijtst.2017.08.001 ↗
20. A laboratory procedure for predicting skid and polishing resistance of road surfaces
21. Prediction of elastic modulus of normal and high strength concrete by artificial neural networks10.1016/j.conbuildmat.2007.04.004 ↗
22. Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks10.1016/j.autcon.2005.07.003 ↗
23. Evaluation of the performance of eco-friendly lightweight interlocking concrete paving units incorporating sawdust wastes and laterite10.1080/23311916.2016.1255168 ↗
24. Strength performance of laterized concrete10.1016/j.conbuildmat.2005.03.002 ↗
25. Potential of wood waste ash as an additive in concrete10.1061/(ASCE)0899-1561(2006)18:4(605) ↗
26. Institutions · 2009
27. B.S. Institutions · 2003
28. S.L. Standards · 2016
29. B.o.I. Standards, · 2006
30. A.S.f.T.a. Materials · 2015
31. N.B.a.R.R. Institute · 2006
32. Standards · 2004
33. Mechanical properties of high-strength steel fiber-reinforced concrete10.1016/j.conbuildmat.2004.04.027 ↗
34. Shrinkage cracking of high-strength concrete
35. Pozzolanic effect of andesite waste powder on mechanical properties of high strength concrete10.1016/j.conbuildmat.2018.01.043 ↗
36. Critical parameters for the compressive strength of high-strength concrete10.1016/j.cemconcomp.2017.06.008 ↗
37. Creep-recovery of normal strength and high strength concrete10.1016/j.conbuildmat.2017.08.163 ↗
38. Effect of type of coarse aggregate on the strength properties and fracture energy of normal and high strength concrete10.1016/j.engfracmech.2018.02.029 ↗
39. Medium strength self-compacting concrete containing fly ash: modelling using factorial experimental plans10.1016/j.cemconres.2003.12.022 ↗
40. Quantification of hydrated cement products of blended cements in low and medium strength concrete using TG and DTA technique10.1016/S0040-6031(03)00286-7 ↗
41. Ultra high strength concrete
42. Mechanical behaviour of ultra-high strength concrete at elevated temperatures and fire resistance of ultra-high strength concrete filled steel tubes10.1016/j.matdes.2016.05.050 ↗
43. Sustainable medium-strength concrete (CS-concrete) from colliery spoil in South Wales UK10.3846/1392-3730.2009.15.149-157 ↗
44. The effects of pumice aggregate/cement ratios on the low-strength concrete properties10.1016/j.conbuildmat.2007.01.030 ↗
45. Pullout performance of fully and partially bonded retrofit anchors in low-strength concrete
46. Novel lightweight concrete containing manufactured plastic aggregate10.1016/j.conbuildmat.2017.05.011 ↗
47. Lightweight concrete design using gene expression programing10.1016/j.conbuildmat.2017.01.120 ↗
48. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete10.1016/S0008-8846(02)01032-3 ↗
49. Investigation of properties of low-strength lightweight concrete for thermal insulation10.1016/j.buildenv.2005.09.024 ↗
50. Ultra-lightweight concrete: energy and comfort performance evaluation in relation to buildings with low and high thermal mass10.1016/j.enbuild.2016.12.049 ↗
51. Ultra-lightweight concrete: conceptual design and performance evaluation10.1016/j.cemconcomp.2015.04.012 ↗
52. Nonlinear finite element modelling and parametric study of curved steel–concrete–steel double skin composite panels infilled with ultra-lightweight cement composite10.1016/j.conbuildmat.2015.07.134 ↗
53. Design and performance evaluation of ultra-lightweight geopolymer concrete10.1016/j.matdes.2015.09.167 ↗
54. A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes10.1016/j.jobe.2017.11.025 ↗
55. Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete
56. Strength properties of lightweight concrete made with basaltic pumice and fly ash10.1016/S0167-577X(03)00146-0 ↗
57. Artificial neural networks and decision tree classifier performance on medium resolution ASTER data to detect gully networks in southern Italy
58. Performance evaluation of hydrological models: statistical significance for reducing subjectivity in goodness-of-fit assessments10.1016/j.jhydrol.2012.12.004 ↗
59. Bluman · 2013
60. Evaluation of the suitability of low-density polyethylene (LDPE) waste as fine aggregate in concrete10.4314/njt.v33i4.1 ↗
61. Effect of acid attack on FRP-to-concrete bonded interfaces10.1016/j.conbuildmat.2017.06.140 ↗
62. Utilization of by-pass cement kiln dust and air-cooled blast-furnace steel slag in the production of some “green” cement products10.1016/j.hbrcj.2017.11.001 ↗
63. The effect of fly ash content and types of aggregates on the properties of pre-fabricated concrete interlocking blocks (PCIBs)10.1016/j.conbuildmat.2011.12.020 ↗
64. Performance evaluation of interlocking paving units in aggressive environments10.1016/j.hbrcj.2012.09.003 ↗
65. Analysis of durability testing of concrete landscaping units10.1016/j.conbuildmat.2017.01.095 ↗
66. Physico-mechanical and durability characteristics of concrete paving blocks incorporating cement kiln dust10.1016/j.conbuildmat.2017.09.107 ↗
67. Mix design methodology for laterized self compacting concrete and its behaviour at elevated temperature10.1016/j.conbuildmat.2012.04.057 ↗
68. Modeling compressive strength of EPS lightweight concrete using regression, neural network and ANFIS10.1016/j.conbuildmat.2013.01.016 ↗
69. Modeling corrosion currents of reinforced concrete using ANN10.1016/j.autcon.2008.07.004 ↗
70. Sawdust ash as concrete material10.1061/(ASCE)0899-1561(2002)14:2(173) ↗
71. Assessment of Malaysian laterite aggregate in concrete
72. Effective use of sawdust for the production of eco-friendly and thermal-energy efficient normal weight and lightweight concretes with tailored fracture properties10.1016/j.jclepro.2018.03.009 ↗
73. Thermal performance of sawdust and lime-mud concrete masonry units10.1016/j.conbuildmat.2018.02.193 ↗
74. Enhancing the performance of pre-cast concrete blocks by incorporating waste glass–ASR consideration10.1016/j.cemconcomp.2007.03.008 ↗
75. Effects of compaction method and rubber content on the properties of concrete paving blocks10.1016/j.conbuildmat.2011.08.069 ↗
76. Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed10.1016/j.biortech.2009.06.003 ↗
77. Evaluation of the effect of palm oil mill sludge on the properties of sawdust briquette10.1016/j.rser.2015.08.001 ↗
78. Modified softwood sawdust as adsorbent of heavy metal ions from water10.1016/j.jhazmat.2005.12.009 ↗
79. Standard · 2004
80. Mechanical properties of chemically treated sawdust-reinforced recycled polyethylene composites10.1021/ie201077k ↗