journal article·2018-10

Design and characterisation of ternary cements containing rice husk ash and fly ash

C. Medina, I.F. Sáez del Bosque, M. Frías, M.I. Sánchez de Rojas

Publisher page

Abstract

This study explored the interaction between rice husk ash (RHA) and fly ash (FA) as partial (0%, 15% or 30%) additions in new ternary cements designed to reduce cement industry energy consumption and greenhouse gas (GHG) emissions by lowering their clinker content. To that end, the effect of the introduction of mixed RHA and FA on the pozzolanicity of the RHA-FA/lime system was assessed and its impact on the chemical, physical, rheological, mechanical, calorimetric and microstructural properties of the new ternary cements analysed. The joint use of these additions revealed mixture synergies, with an initial rise in FA pozzolanicity in the presence of RHA, although this effect declined over time. The inclusion of the RHA-FA mixture prompted changes in the pore structure of mortars that after 90 d translated into 2% lower compressive strength than the control in mortars with 15% addition and a 19% decline in materials containing 30% waste. That notwithstanding, the new cements were European standard EN 197-1-compliant for cement types II/A-M, II/B-M and IV-A. Furthermore, the mortars prepared with 15% RHA-FA released 5.67% less total of hydration than OPC and the materials containing 30% of the addition 13.54% less than the reference. In light of the foregoing, the new cements were found to be apt for use in construction, particularly in structures where large volumes of concrete are needed, for the reduction of the thermal gradient lowers the likelihood of surface cracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Influence of aging conditions upon the properties of calcined clay and its performance as supplementary cementitious material10.1016/j.cemconcomp.2016.05.020 ↗
2. Extending supplementary cementitious material resources: reclaimed and remediated fly ash and natural pozzolans
3. Performance and properties of mortar mixed with nano-CuO and rice husk ash10.1016/j.cemconcomp.2016.10.006 ↗
4. European Standard. EN 197-1 · 2011
5. Limestone and silica powder replacements for cement: early-age performance10.1016/j.cemconcomp.2017.01.001 ↗
6. Beneficiation of the huge waste quantities of barley and rice husks as well as coal fly ashes as additives for Portland cement10.1016/j.jiec.2013.11.034 ↗
7. Effect of rice-husk ash on durability of cementitious materials10.1016/j.cemconcomp.2010.07.008 ↗
8. Physical and chemical contributions of Rice Husk Ash on the properties of mortar10.1016/j.conbuildmat.2016.10.029 ↗
9. Effect of grinding of low-carbon rice husk ash on the microstructure and performance properties of blended cement concrete10.1016/j.cemconcomp.2014.09.021 ↗
10. Rice husk ash (RHA) effectiveness in cement and concrete as a function of reactive silica and fineness10.1016/j.cemconres.2014.04.001 ↗
11. Utilization of rice husk-bark ash to improve the corrosion resistance of concrete under 5-year exposure in a marine environment10.1016/j.cemconcomp.2012.12.007 ↗
12. Hydration of ternary cementitious system: Portland cement, fly ash and silica fume10.1007/s10973-014-4182-8 ↗
13. Improvement of acid resistance of Portland cement pastes using rice husk ash and cement kiln dust as additives10.1007/s10973-012-2458-4 ↗
14. Influence of sugar-cane bagasse ash and fly ash on the rheological behavior of cement pastes and mortars10.1016/j.conbuildmat.2012.11.023 ↗
15. Microstructure and durability properties of cement mortars containing nano-TiO2 and rice husk ash10.1016/j.conbuildmat.2016.03.136 ↗
16. Performance investigation and environmental application of basic oxygen furnace slag - rice husk ash based composite cementitious materials10.1016/j.conbuildmat.2016.07.051 ↗
17. Microstructural verification of the strength performance of ternary blended cement systems with high volumes of fly ash and GGBFS10.1016/j.conbuildmat.2015.07.158 ↗
18. Accelerated carbonation effect on behaviour of ternary Portland cements10.1016/j.compositesb.2012.12.008 ↗
19. Combine effect of rice husk ash and fly ash on concrete by 30% cement replacement10.1016/j.proeng.2013.01.009 ↗
20. Use of ternary blend of Portland cement and two pozzolans to improve durability of high-strength concrete10.1007/s12205-014-0461-y ↗
21. Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar10.1016/j.conbuildmat.2007.06.010 ↗
22. Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials10.1007/s12613-013-0800-x ↗
23. Studies on effects of burning conditions and rice husk ash (RHA) blending amount on the mechanical behavior of cement10.1016/j.cemconcomp.2014.09.008 ↗
24. European Standard. EN 196-6 · 2010
25. The pozzolanic activity of different materials, its influence on the hydration heat in mortars10.1016/0008-8846(95)00200-6 ↗
26. European Standard. EN 196-5:2011 · 2011
27. European Standard. EN 196-3:2005 · 2005
28. European Standard. EN 196-1:2005 · 2005
29. American Society for Testing and Materials · 2004
30. European Standard. EN 196-9:2011 · 2011
31. American Society for Testing and Materials, C618-15 · 2015
32. Morphology and properties in blended cements with ceramic wastes as a pozzolanic material10.1111/j.1551-2916.2006.01279.x ↗
33. Characterization and properties of elephant grass ashes as supplementary cementing material in pozzolan/Ca(OH)2 pastes10.1016/j.conbuildmat.2014.09.078 ↗
34. Characterization and properties of blended cement matrices containing activated bamboo leaf wastes10.1016/j.cemconcomp.2012.05.005 ↗
35. Sugar cane wastes as pozzolanic materials: application of mathematical model
36. Influence of two different fly ashes on the hydration of Portland cements10.1023/B:JTAN.0000042167.46181.17 ↗
37. Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction10.1016/j.cemconres.2015.01.006 ↗
38. Aluminosilicates with varying alumina-silica ratios: synthesis via a hybrid sol-gel route and structural characterisation10.1039/c001219j ↗
39. Structure of calcium silicate hydrate (C-S-H): near-, mid-, and far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
40. Assessing and calibrating the ATR-FTIR approach as a carbonate rock characterization tool10.1016/j.sedgeo.2016.07.003 ↗
41. Influence of Cr, Ni, and Zn on the properties of pure clinker phases – Part I. C3S10.1016/S0008-8846(99)00009-5 ↗
42. Chapter 5 - Artificial pozzolans in eco-efficient concrete
43. Advantages in the use of fly ashes in cements containing pozzolanic combustion residues: silica fume, sewage sludge ash, spent fluidized bed catalyst and rice husk ash10.1002/jctb.583 ↗
44. Utilization of high volumes of unprocessed lignite-coal fly ash and rice husk ash in self-consolidating concrete10.1016/j.jclepro.2014.04.060 ↗
45. Hydration behavior and mechanical properties of blended cement containing various amounts of rice husk ash in presence of metakaolin10.1016/j.arabjc.2013.12.006 ↗
46. Synthesis and characterization of mortars with circulating fluidized bed combustion fly ash and ground granulated blast-furnace slag10.1016/j.conbuildmat.2016.07.071 ↗
47. Ternary mixes with high mineral additions contents and corrosion related properties10.1002/maco.201206654 ↗
48. Hydration study of ternary blended cements containing ferronickel slag and natural pozzolan10.1016/j.conbuildmat.2015.02.046 ↗
49. Physico-mechanical properties of composite cement pastes containing silica fume and fly ash10.1016/j.hbrcj.2014.02.003 ↗
50. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete10.1016/j.fuel.2009.10.003 ↗
51. Investigation into the synergistic effects in ternary cementitious systems containing Portland cement, fly ash and silica fume10.1016/j.cemconcomp.2011.11.014 ↗
52. An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume10.1016/j.conbuildmat.2017.03.228 ↗
53. Granite quarry waste as a future eco-efficient supplementary cementitious material (SCM): scientific and technical considerations10.1016/j.jclepro.2017.02.048 ↗
54. Microstructural alterations in fly ash mortars: study on phenomena affecting particle and pore size10.1016/S0008-8846(97)00026-4 ↗
55. Evaluation of electric properties of cement mortars containing pozzolans10.3989/mc.2010.53709 ↗
56. Hewlett · 1998
57. Pozzolanic reaction of a spent fluid catalytic cracking catalyst in FCC-cement mortars10.1007/s10973-006-7921-7 ↗
58. New additions for eco-efficient cement design. Impact on calorimetric behaviour and comparison of test methods
59. Influence of the calcined paper sludge on the development of hydration heat in blended cement mortars10.1007/s10973-007-8270-x ↗
60. Heat of hydration of Portland cement-metakaolin-fly ash (PC-MK-PFA) blends10.1016/j.cemconres.2008.01.004 ↗
61. Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortars10.1016/j.matdes.2011.11.043 ↗
62. Influence of preparation method on the performance of ternary blended cements10.1016/j.cemconcomp.2014.04.005 ↗
63. High strength mortars using ordinary Portland cement-fly ash-fluid catalytic cracking catalyst residue ternary system (OPC/FA/FCC)10.1016/j.conbuildmat.2015.12.111 ↗