Ladle slag cement – Characterization of hydration and conversion
Source abstract
Abstract
Abstract Ladle slag, a by-product of steelmaking process, has shown potential to be used as a cementitious material in construction. However, the stability of the hydration products has not been investigated, and has been found to depend on available water. This paper presents the investigation of ladle slag hydration at different water-to-binder ratios. Hydrates of ladle slag converts from metastable to a stable reaction product over a period of time, thus affecting the mechanical and microstructural properties of the hydrated slag. These hydration products were analyzed using TGA, XRD, 27Al NMR, FTIR and SEM techniques. The water-to-binder ratio primarily contributes to the rate at which the conversion process occurs in the system which consequently has a direct effect on the strength derived over a period of time. Through analytical characterization of the microstructure, these hydrates and the conversion process were confirmed, revealing the initial hydrate product of ladle slag to be a metastable dicalcium aluminate octahydrate (C2AH8) which converts to a stable tricalcium aluminate hexahydrate (C3AH6) over a period of time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Characteristics and cementitious properties of ladle slag fines from steel production10.1016/S0008-8846(01)00707-4 ↗
2. Hydration properties of ladle furnace slag powder rapidly cooled by air10.1016/j.conbuildmat.2016.03.089 ↗
3. Characterization of ladle furnace basic slag for use as a construction material10.1016/j.conbuildmat.2008.10.003 ↗
4. Chemical, mineralogical, and morphological properties of steel slag
5. Influence of mineralogy on the hydraulic properties of ladle slag10.1016/j.cemconres.2011.04.003 ↗
6. Hydration of mixtures of C12A7 and granulated blastfurnace slag10.1016/0008-8846(89)90097-5 ↗
7. Calcium aluminate cement-based compositions for biomaterial applications10.1016/j.ceramint.2016.04.092 ↗
8. Calcium aluminate cements
9. Properties and durability of alkali-activated ladle slag10.1617/s11527-017-1125-4 ↗
10. Odler · 2003
11. The conversion of high alumina cement/concrete10.1016/0025-5416(76)90085-9 ↗
12. The conversion of high alumina cement10.1680/macr.1975.27.91.59 ↗
13. The application of thermal analysis to the hydration and conversión Reactions of calcium alumínate Cements10.3989/mc.1992.v42.i228.694 ↗
14. Barnes · 2002
15. Cementitious phases in ladle slag10.1002/srin.201000176 ↗
16. X. Cong, R.J. Kirkpatrick, Hydration of calcium aluminate cements: a solid-state 27 Al NMR Study, J. Am. Ceram. Soc. 76 (n.d.) 409–416. https://doi.org/10.1111/j.1151-2916.1993.tb03799.x.10.1111/j.1151-2916.1993.tb03799.x ↗
17. Identification of the hydrate gel phases present in phosphate-modified calcium aluminate binders10.1016/j.cemconres.2015.01.007 ↗
18. Dehydration of a layered double hydroxide—C2AH810.1016/j.tca.2007.07.022 ↗
19. Transition and decomposition temperatures of cement phases – a collection of thermal analysis data
20. 9 – Introduction to non-portland cement binders and concrete
21. Studies of conversion progress of calcium aluminate cement hydrates by thermal analysis method10.1007/s10973-014-3804-5 ↗
22. Characterization of calcium aluminate phases in cements by aluminum-27 MAS NMR spectroscopy10.1021/ic00058a043 ↗
23. Structure of carbon-coated C12A7 electride via solid-state NMR and DFT calculations10.1021/acs.jpcc.7b08132 ↗
24. An application of solid-state magic-angle spinning 27Al NMR to the study of cement hydration