Epoxy interlocking: A novel approach to enhance FRP-to-concrete bond behavior
Source abstract
Abstract
Abstract This paper presents a novel approach which can enhance the interfacial bond behavior between fiber reinforced polymer (FRP) composite material and concrete. Epoxy ribs are formed by grooving on the concrete surface before epoxy is applied. The dowel action from the epoxy ribs leads to an “epoxy interlocking” effect. The mechanism of the proposed epoxy interlocking approach was analyzed in this paper from both adhesion and interlocking aspects. Furthermore, the partial interaction of the epoxy interlocking was quantified and calibrated by experimental results. The epoxy interlocking in the tested specimens led to an 88.8% increase in bond strength on average. An analytical approach was proposed to quantify the average partial interaction for the individual epoxy ribs. The load-slip relationship for individual epoxy ribs was found to be related to concrete compression behavior. A parametric study was conducted analytically on the effects of groove depth and spacing, concrete strength and epoxy rib location. The reasonable results in the parametric study further verify the efficiency of the epoxy interlocking to enhance the bond performance between FRP and concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Fully probabilistic analysis of FRP-to-concrete bonded joints considering model uncertainty10.1016/j.compstruct.2017.11.058 ↗
2. Influence of surface roughness on the bond of FRP laminates to concrete10.1016/j.conbuildmat.2012.09.112 ↗
3. Experimental study on bond behavior between FRP and concrete10.1016/j.conbuildmat.2004.04.026 ↗
4. Environmental durability of externally bonded FRP materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
5. Effects of FRP-concrete interface bond properties on the performance of RC beams strengthened in flexure with externally bonded FRP sheets10.1061/(ASCE)0899-1561(2006)18:5(723) ↗
6. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
7. Effect of groove characteristics on CFRP-to-concrete bond behavior of EBROG joints: experimental study using particle image velocimetry (PIV)10.1016/j.conbuildmat.2013.08.036 ↗
8. Experimental investigation into bond behavior of CFRP sheets attached to concrete using EBR and EBROG techniques10.1016/j.compositesb.2013.03.003 ↗
9. Bond-test protocol for plate-to-concrete interface involving all mechanisms10.1061/(ASCE)CC.1943-5614.0000581 ↗
10. Behaviour of handmade FRP anchors under tensile load in uncracked concrete10.1260/136943309790327716 ↗
11. Tensile behavior of FRP anchors in concrete10.1061/(ASCE)1090-0268(2009)13:2(82) ↗
12. FRP-strengthened RC slabs anchored with FRP anchors10.1016/j.engstruct.2010.11.018 ↗
13. Influence of FRP anchor fan configuration and dowel angle on anchoring FRP plates10.1016/j.compositesb.2011.11.072 ↗
14. Analysis of RC beams strengthened with mechanically fastened FRP (MF-FRP) strips10.1016/j.compstruct.2005.12.001 ↗
15. Flexural strengthening of reinforced concrete beams by mechanically attaching fiber-reinforced polymer strips10.1061/(ASCE)1090-0268(2004)8:3(203) ↗
16. Performance of mechanically fastened FRP strengthened concrete beams in flexure10.1061/(ASCE)1090-0268(2008)12:3(257) ↗
17. Shear capacity comparison of four different composite interfaces between FRP plates and concrete substrate10.1061/(ASCE)CC.1943-5614.0000666 ↗
18. Hybrid bonding of FRP to reinforced concrete structures10.1061/(ASCE)1090-0268(2008)12:3(266) ↗
19. Characterization of mechanically enhanced FRP bonding system10.1061/(ASCE)CC.1943-5614.0000302 ↗
20. Ultimate strength of reinforced concrete beams retrofitted with hybrid bonded fiber-reinforced polymer
21. Numerical analyses of hybrid-bonded FRP strengthened concrete beams10.1111/j.1467-8667.2009.00596.x ↗
22. Application of improved hybrid bonded FRP technique to FRP debonding prevention10.1016/j.conbuildmat.2010.12.033 ↗
23. Effect of defects in externally bonded FRP reinforced concrete10.1016/j.conbuildmat.2018.03.217 ↗
24. Analytical modeling of the bond–slip relationship at FRP-concrete interfaces for adhesively-bonded joints10.1016/j.compositesb.2010.06.004 ↗
25. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
26. Quantification of bond-slip relationship for externally bonded FRP-to-concrete joints10.1061/(ASCE)CC.1943-5614.0000375 ↗
27. Effective bond length of FRP sheets externally bonded to concrete10.4334/IJCSM.2009.3.2.127 ↗
28. Effective bond length of FRP-to-concrete adhesively-bonded joints: experimental evaluation of existing models10.1016/j.ijadhadh.2013.09.022 ↗
29. Modelling of FRP-concrete bonded interfaces containing FRP anchors10.1016/j.conbuildmat.2017.02.080 ↗
30. Degradation of steel-to-concrete bond due to corrosion10.1016/j.conbuildmat.2017.09.142 ↗
31. Enhancing FRP-to-concrete bond behavior by epoxy ribs
32. Omboko · 2017
33. Neville · 1996
34. Effect of aggregate size on stress-strain behavior of concrete confined by fiber composites10.1016/j.compstruct.2017.02.087 ↗
35. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
36. Analytical identification of bond–slip relationship of EB-FRP joints10.1016/j.compositesb.2012.01.048 ↗
37. Analytical identification of bond parameters for EB-FRP joints
38. Analytical solution for the bond strength of externally bonded reinforcement10.1016/j.compstruct.2012.04.026 ↗
39. Bond-slip models for CFRP plates externally bonded to steel substrates10.1016/j.compstruct.2017.10.033 ↗
40. Evaluation of strength criteria for very-high-strength concretes under triaxial compression
41. Cross-sectional unification on the stress-strain model of concrete subjected to high passive confinement by fiber-reinforced polymer10.3390/polym8050186 ↗
42. Effect of load eccentricity on the stress–strain relationship of FRP-confined concrete columns10.1016/j.compstruct.2012.11.023 ↗
43. Numerical approach to the complete stress–strain relation for concrete10.1016/0008-8846(73)90096-3 ↗
44. ACI Committee 318 · 1999
45. Stress-strain relationship for plain concrete in compression