journal article·2019-01

Compressive behavior of basalt FRP-confined circular and non-circular concrete specimens

Sakol Suon, Shahzad Saleem, Amorn Pimanmas

Publisher page

Abstract

Abstract This paper presents an experimental study on the compressive behavior of concrete specimens confined by a new class of composite materials originated from basalt rock, Basalt Fiber Reinforced Polymer (BFRP). The main objective of this study is to observe the difference between compressive behavior of circular and non-circular concrete specimens jacketed with BFRP composite. For this purpose, a total of 56 small scale specimens without internal steel reinforcement were tested under monotonic axial compression to failure. The parameters considered were the cross-section shape (i.e., circular, square, and rectangular), corner radius in case for non-circular specimens (i.e., 0 mm defined for sharp corner, 13 mm, and 26 mm), and number of BFRP layers (i.e., 0 for unconfined specimens, 3, 6, and 9). The results of BFRP-confined concrete specimens of this study exhibited a similar bilinear stress-strain response with different confinement effectiveness depending on the considered parameters particularly in the inelastic range. The results also demonstrated an improvement of the ultimate condition of confined concrete with an increase in number of BFRP layers or corner radius. In contrast, the BFRP confinement effectiveness was decreased with an increase in sectional aspect ratio or when the cross-section was changed from circular to non-circular. Overall, the experimental results indicated the well-performing of basalt fiber in improving the concrete compressive behavior. Finally, ultimate condition of BFRP-confined specimens of present study is predicted by seven existing models developed for other FRPs. The comparison indicates that the ultimate strength of BFRP-confined specimens is predicted in a good way by some models; however, these models were unable to predict well their ultimate axial strain and need further improvement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Fiber-reinforced polymer composites for construction—State-of-the-art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Fundamental principles that govern retrofitting of reinforced concrete columns by steel and FRP jacketing10.1260/136943306778812769 ↗
3. Application of polymer composites in civil construction: a general review10.1016/j.compstruct.2007.06.007 ↗
4. D. García, P. Allonso, J. San-Josi, L. Garmendia Confinement of medium strength concrete cylinders with basalt Textile Reinforced Mortar, in: ICPIC 2010-13th International Congress on Polymers in Concrete, 2010.
5. Structural upgrade using basalt fibers for concrete confinement10.1061/(ASCE)CC.1943-5614.0000114 ↗
6. I. Yilmaz, P. Mezrea, M. Ispir, E. Binbir, I. Bal, A. Ilki, “External Confinement of Brick Masonry Columns with Open-Grid Basalt Reinforced Mortar,” in: Proceedings of the Fourth Asia-Pacific Conference on FRP in Structures (APFIS 2013), Melbourne, Australia, 2013, pp. 11–13.
7. A. Ates, E. Tore, S. Khoshkholghi, A. Ilki Sprayed, textile reinforced GFRC for retrofitting of sub-standard non-circular concrete columns, 2017.
8. Effect of cross-sectional aspect ratio and basalt fiber-reinforced polymer-confined number on axial compression behavior of short columns10.1177/0731684415580330 ↗
9. A short review on basalt fiber
10. A review on basalt fibre and its composites10.1016/j.compositesb.2014.12.034 ↗
11. Static and fatigue characterisation of new basalt fibre reinforced composites10.1016/j.compstruct.2011.10.007 ↗
12. Glass–basalt/epoxy hybrid composites for marine applications10.1016/j.matdes.2010.11.043 ↗
13. Characteristics of basalt fiber as a strengthening material for concrete structures10.1016/j.compositesb.2005.02.002 ↗
14. Tensile behaviors of basalt, carbon, glass, and aramid fabrics under various strain rates10.1061/(ASCE)MT.1943-5533.0001587 ↗
15. Behaviour of reinforced concrete beams strengthened with basalt textile reinforced concrete10.1177/1528083714521068 ↗
16. Behavior of reinforced concrete box beam with initial cracks repaired with basalt fiber-reinforced polymer sheet10.1177/0731684415595469 ↗
17. Behavior in compression of concrete cylinders externally wrapped with basalt fibers10.1016/j.compositesb.2014.10.008 ↗
18. Teng · 2008
19. Park · 1975
20. Effect of column parameters on FRP-confined concrete10.1061/(ASCE)1090-0268(1998)2:4(175) ↗
21. Effect of corner radius on the performance of CFRP-confined square concrete columns: Test10.1016/j.engstruct.2007.04.016 ↗
22. Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns10.1016/j.engstruct.2009.08.012 ↗
23. Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates10.1016/j.compositesb.2006.06.019 ↗
24. Strength of short concrete columns confined with CFRP sheets10.1007/BF02482090 ↗
25. Axial testing of rectangular column models confined with composites10.1061/(ASCE)1090-0268(2000)4:3(129) ↗
26. Low strength concrete members externally confined with FRP sheets10.12989/sem.2004.18.2.167 ↗
27. FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns10.1061/(ASCE)0899-1561(2008)20:2(169) ↗
28. Behavior of large-scale rectangular columns confined with FRP composites10.1061/(ASCE)CC.1943-5614.0000051 ↗
29. Behaviour of square concrete column confined with GFRP composite warp10.3846/1392-3730.2008.14.6 ↗
30. Shape effect on the performance of carbon fiber reinforced polymer wraps10.1061/(ASCE)1090-0268(2004)8:5(444) ↗
31. Compressive behavior of PET FRP–confined circular, square, and rectangular concrete columns10.1061/(ASCE)CC.1943-5614.0000754 ↗
32. ACI committes 440, Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures ACI 440.2R-08, American Concrete Institute, 2008.
33. ASTM, “Standard test method for tensile properties of polymer matrix composite materials,” ASTM D3039M-08, 2008.
34. Design-oriented stress–strain model for FRP-confined concrete10.1016/S0950-0618(03)00045-X ↗
35. Ultimate condition of fiber reinforced polymer-confined concrete10.1061/(ASCE)1090-0268(2004)8:6(539) ↗
36. J. Restrepol, B. DeVino, Enhancement of the axial load carrying capacity of reinforced concrete columns by means of fiberglass-epoxy jackets, in: Proceedings of the 2nd International Conference on Advanced Composite Materials in Bridges and Structures, ACMBS-II,, Montreal 1996, 1996.
37. ACI Committee 440, Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, ACI 440.2R-02, American Concrete Institute, 2002.
38. Design-oriented stress-strain model for FRP-confined concrete in rectangular columns10.1177/0731684403035429 ↗
39. Stress–strain model for concrete confined by FRP composites10.1016/j.compositesb.2006.07.020 ↗
40. Unified stress–strain model of concrete for FRP-confined columns10.1016/j.conbuildmat.2011.06.037 ↗
41. Theoretical stress-strain model for confined concrete10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗