journal article·2019-02

Experimental mechanical-damage assessment of earthen mixes reinforced with micro polypropylene fibers

G. Araya-Letelier, J. Concha-Riedel, F.C. Antico, C. Sandoval

Publisher page

Abstract

Abstract The addition of engineered polypropylene fibers to earthen materials offers new opportunities to control their damage evolution and mechanical properties that altogether provides more reliability and extends the life span of these materials. The latter is of special interest considering that earthen materials are still widely used in the form of adobe blocks for earthen masonry, cob, rammed earth or even earthen mortars for new construction and conservation of historic buildings. In this work, the effect of dosage of micro polypropylene fibers (MPPF) in the damage-mechanical performance of earthen mixes is studied experimentally. Part of the experiments includes two different tests to assess distributed and localized cracking of reinforced earth subject to restrained drying shrinkage. In addition, the experimental results showed that the incorporation of MPPF increases up to 83 times the impact strength and 11 times the flexural toughness of earthen mixes. Other mechanical properties such as compressive and flexural strength are not statistically affected by the incorporation of MPPF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Comprehensive design method for earthbag and superadobe structures10.1016/j.matdes.2016.02.028 ↗
2. Obstacles and motivations for earthbag social housing in Chile: energy, environment, economic and codes implications10.4067/S0718-915X2016000300002 ↗
3. Uniaxial compression and tensile splitting tests on adobe with embedded steel wire reinforcement10.1016/j.conbuildmat.2018.05.006 ↗
4. Minke · 2009
5. E. Fajnzylber, Viviendas de Adobe en Chile, 2010.
6. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
7. Plant aggregates and fibers in earth construction materials: a review10.1016/j.conbuildmat.2016.02.119 ↗
8. Experimental analysis of pressed adobe blocks reinforced with hibiscus cannabinus fibers10.1016/j.conbuildmat.2013.10.094 ↗
9. Rammed earth sample production: context, recommendations and consistency10.1016/j.conbuildmat.2003.11.001 ↗
10. Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material10.1016/j.conbuildmat.2011.08.008 ↗
11. Experimental research on the recyclability of the clay material used in the fabrication of adobe bricks type masonry units10.1016/j.proeng.2017.02.402 ↗
12. Towards poured earth construction mimicking cement solidification: demonstration of feasibility via a biosourced polymer10.1617/s11527-017-1092-9 ↗
13. Influence of natural fiber dosage and length on adobe mixes damage-mechanical behavior10.1016/j.conbuildmat.2018.04.151 ↗
14. Experimental investigation of the strength properties of sand-clay mixtures reinforced with randomly distributed discrete polypropylene fibers10.1680/gein.2009.16.5.354 ↗
15. ASTM International, ASTM D2487 – 17 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), 2017.
16. Incidencia de la Adición de Fibras Poliméricas para Morteros sobre la Resistencia a Flexión y Compresión de Estucos de Barro10.4067/S0718-915X2012000300002 ↗
17. Earthen construction materials: assessing the feasibility of improving strength and deformability of compressed earth blocks using polypropylene fibers10.1016/j.matdes.2015.06.017 ↗
18. The effects of waste marble dust and polypropylene fiber contents on mechanical properties of gypsum stabilized earthen10.1016/j.conbuildmat.2016.12.172 ↗
19. Corporación de Desarrollo Tecnológico · 2012
20. ASTM International, ASTM C1116/C1116M – 10a Standard Specification for Fiber-Reinforced Concrete, 2015.
21. Sika® Fiber P-12 - Sika Chile (in spanish), n.d.
22. SENCICO, Norma Técnica Peruana E.080 Diseño y Construcción con Tierra Reforzada, 2017.
23. G. Minke, Building with Earth, 2006. https://archive.org/details/Gernot_Minke-Building_With_Earth/.
24. The selection of soils for unstabilised earth building: a normative review10.1016/j.conbuildmat.2005.08.006 ↗
25. Standards Australia and Walker P, HB 195: The Australian Earth Building Handbook. Sydney (Australia): Standards Australia, 2002.
26. ASTM International, ASTM C1579 – 13 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert), 2013.
27. ASTM International, ASTM C109/C109M-16a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), 2016.
28. ASTM International, ASTM C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert), 2013, doi: 10.1520/C1579-13.2.
29. ASTM International, ASTM C1018 – 97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006), 1997, https://www.astm.org/Standards/C1018.htm.
30. A procedure to assess the suitability of plaster to protect vernacular earthen architecture10.1016/j.culher.2012.04.005 ↗
31. An experimental study on shrinkage of earth plaster with natural fibres for straw bale buildings10.1080/19397038.2010.504379 ↗
32. Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres10.1016/j.conbuildmat.2015.10.069 ↗
33. Desiccation cracking behavior of polypropylene fiber-reinforced clayey soil10.1139/t2012-067 ↗
34. A study on desiccation cracking behavior of polyester fiber-reinforced expansive clay10.1016/j.clay.2017.02.008 ↗
35. Saw-cutting guidelines for concrete pavements: examining the requirements for time and depth of saw-cutting
36. Using accelerated pavement testing to examine traffic opening criteria for concrete pavements10.1016/j.conbuildmat.2015.07.177 ↗
37. F.C. Antico, H.S. Esmaeeli, I. De Varga, W. Jones, T. Barrett, P. Zavattieri, W.J. Weiss, W. Jones, Removing obstacles for pavement cost reduction by examining early age opening requirements : material properties, 2015. doi: 10.5703/1288284316003.10.5703/1288284316003 ↗
38. Antico · 2018
39. Effectiveness of new natural fibers on damage-mechanical performance of mortar10.1016/j.conbuildmat.2017.07.072 ↗
40. Fiber-reinforced mortar incorporating pig hair10.4028/www.scientific.net/AEF.21.219 ↗
41. Impact strength of a few natural fibre reinforced cement mortar slabs: a comparative study10.1016/j.cemconcomp.2004.09.006 ↗
42. Physical-mechanical characterization of fiber-reinforced mortar incorporating pig hair
43. Devore · 2011
44. Enhancing compressive strength of soil using natural fibers10.1016/j.conbuildmat.2015.05.065 ↗
45. Effect of moisture content on the mechanical characteristics of rammed earth10.1016/j.conbuildmat.2013.12.067 ↗
46. Construction Industries Division of the Regulation and Licensing Department, New Mexico Earthen Building Code, 2011.
47. Characterization of clayey soils from congo and physical properties of their compressed earth blocks reinforced with post-consumer plastic wastes10.4236/gm.2011.13013 ↗
48. Microstructure and physical properties of lime-clayey adobe bricks10.1016/j.conbuildmat.2007.09.002 ↗
49. Chapter 5 – High-Performance Concretes, 1989-1994 – FHWA-RD-97-030, n.d.
50. Effect of straw fiber reinforcement on the mechanical properties of adobe bricks10.1061/9780784480779.165 ↗
51. Development of a direct tensile test for compacted earth blocks reinforced with natural fibers10.1061/(ASCE)0899-1561(2004)16:1(95) ↗
52. Effect of polypropylene fiber length on the flexural and compressive strength of compressed stabilized earth blocks
53. Mindess · 2002
54. Increasing the strength of soil for adobe construction10.1080/00038628.2000.9697547 ↗
55. Determination of fracture energy from size effect and brittleness number
56. Adhesion of nickel-titanium shape memory alloy wires to thermoplastic materials: theory and experiments10.1088/0964-1726/21/3/035022 ↗