Study on the gradient heating and healing behaviors of asphalt concrete induced by induction heating
Source abstract
Abstract
Abstract This paper investigated the heating temperature field and gradient healing behavior of asphalt concrete contained steel fibers via induction heating. The heating temperature field of asphalt concrete by induction heating was studied with an infrared camera. The healing rate of the specimens in different healing conditions were investigated by testing the fracture resistance recovery after healing. In addition, the crack healing rate of asphalt concrete was studied by high-resolution 3D X-ray microscope (CT) to verify the effective healing depth. The results quantified the induction heating temperature field, related to heating distance and time. After 60 s induction heating, the temperature at 5 cm increased from 25 °C to 44.1 °C, and at 1 cm from 25 °C to 75.1 °C, which indicated that the closer to the coil, the faster the heating rate was. Laboratory beams experiments showed that there was obvious gradient healing behavior during induction heating, which was mainly related to the gradient distribution of temperature. After 60 s induction heating, the healing rate of each layer could be maintained at a high level, the upper layer was at 65% ∼ 75%, the middle layer was at 50% ∼ 60%, and the lower layer was at 40% ∼ 50%. Gradient heating and healing resulted in effective healing depth of asphalt concrete, which can be determined according to the temperature distribution and the softening point of the binder. It was also verified by the crack healing rate obtained from CT scanning. It was also found that the strength recovery was much lower than the crack healing rate due to the fracture of the stones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Asphalt Pavement Performance Evaluation · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Inhibiting effect of layered double hydroxides on the emissions of volatile organic compounds from bituminous materials10.1016/j.jclepro.2015.06.115 ↗
2. A review on hydronic asphalt pavement for energy harvesting and snow melting10.1016/j.rser.2015.04.029 ↗
3. Induction healing of asphalt mastic and porous asphalt concrete10.1016/j.conbuildmat.2011.04.016 ↗
4. Self-healing of asphalt mixture by microwave and induction heating10.1016/j.matdes.2016.05.095 ↗
5. Electrical conductivity of asphalt mortar containing conductive fibers and fillers10.1016/j.conbuildmat.2009.06.014 ↗
6. Effect of chemical composition and structure of asphalt binders on self-healing10.1016/j.conbuildmat.2016.12.082 ↗
7. Investigating the self-healing capability of bituminous binders10.1080/14680629.2009.9690237 ↗
8. Effect of air voids content on asphalt self-healing via induction and infrared heating10.1016/j.conbuildmat.2016.09.115 ↗
9. Heating asphalt mixtures with microwaves to promote self-healing10.1016/j.conbuildmat.2012.12.007 ↗
10. Healing characteristics of asphalt binder10.1016/j.conbuildmat.2011.07.006 ↗
11. Investigation of microwave healing performance of electrically conductive carbon fiber modified asphalt mixture beams10.1016/j.conbuildmat.2016.09.039 ↗
12. Induction healing of dense asphalt concrete10.1016/j.conbuildmat.2013.07.105 ↗
13. Induction heating of asphalt mastic for crack control10.1016/j.conbuildmat.2012.11.075 ↗
14. The healing capability of asphalt pavements: a state of the art review10.1016/j.jclepro.2015.12.034 ↗
15. A simple model to define induction heating in asphalt mastic10.1016/j.conbuildmat.2011.12.046 ↗
16. Investigation of the optimal self-healing temperatures and healing time of asphalt binders10.1016/j.conbuildmat.2016.03.145 ↗
17. Induction heating of electrically conductive porous asphalt concrete10.1016/j.conbuildmat.2009.12.019 ↗
18. Integrated computational-experimental approach for evaluating recovered fracture strength after induction healing of asphalt concrete beam specimens10.1016/j.conbuildmat.2015.12.130 ↗
19. Investigation of induction healing effects on electrically conductive asphalt mastic and asphalt concrete beams through fracture-healing tests10.1016/j.conbuildmat.2013.08.089 ↗
20. Biot-Savart’s Law of magnetic anisotropy and its application
21. Calculating the magnetic field of a magnetic dipole by Biot-Savart’s law
22. Yu · 2017
23. A comparative study of the induction healing behaviors of hot and warm mix asphalt10.1016/j.conbuildmat.2017.03.195 ↗
24. Ministry of Transport of the People’s Republic of China. In JTG E20–2011 · 2011 · 249
25. Induction Healing of porous asphalt concrete beams on an elastic foundation10.1061/(ASCE)MT.1943-5533.0000677 ↗