An experimental investigation on the integral waterproofing capacity of polypropylene fiber concrete with fly ash and slag powder
Source abstract
Abstract
Abstract The influence of polypropylene fiber (PF) on the waterproofing performance and chloride resistance of high performance concrete (HPC) made with fly ash and slag powder is comprehensively investigated from macro and micro perspectives via a series of experimental tests, including (i) slump and mechanical tests to measure the workability, (ii) capillary water adsorption tests to investigate the waterproofing capacity, (iii) chloride penetration tests to investigate the chloride resistance and (iv) mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) tests to observe the pore size distribution and the microstructure. Test results reveal that the addition of PF to HPC improves its waterproofing capacity and chloride resistance while having little effect on the workability. The waterproofing capacity and chloride resistance improve as the volume fraction of PF increases in the range of 0–1.35 kg/m3. Based on the results of MIP and SEM tests, the mechanism of the effects of PF on waterproofing and chloride resistance is also analyzed. Adding PF to the concrete mixture results in a decrease of the pore size, a decrease of the porosity, an enhancement of bonding between C-S-H and Ca(OH)2, and a much denser interfacial transition zone. All these microstructure changes contribute to the increase of the waterproofing performance and chloride resistance of PF-reinforced HPC made with fly ash and slag powder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Genetic analysis and preventing measures for the tunnel water penetration and water leakage
2. Tunnel waterproofing practices in China10.1016/S0886-7798(00)00048-1 ↗
3. Development and application of the integrated sealant test apparatus for sealing gaskets in tunnel segmental joints10.1016/j.tust.2016.12.008 ↗
4. Experimental investigation on the mechanical behaviour of the fiber reinforced high-performance concrete tunnel segment10.1016/j.compstruct.2010.10.006 ↗
5. Experimental exploration of the waterproofing mechanism of inorganic sodium silicate-based concrete sealers10.1016/j.conbuildmat.2015.12.069 ↗
6. Application of high performance polypropylene fibers in concrete lining of water tunnels10.1016/j.matdes.2013.09.075 ↗
7. Shrinkage and cracking studies of high performance concrete for bridge decks10.1016/j.conbuildmat.2011.08.066 ↗
8. The effect of steel and polypropylene fibers on the chloride diffusivity and drying shrinkage of high-strength concrete10.1016/j.compositesb.2017.11.047 ↗
9. Wu · 1999
10. Chloride binding in GGBS concrete10.1016/S0008-8846(96)00180-9 ↗
11. Durability of concrete incorporating high-volume of low-calcium (ASTM class F) fly ash10.1016/0958-9465(90)90006-J ↗
12. Shrinkage of polypropylene fiber-reinforced high-performance concrete10.1061/(ASCE)MT.1943-5533.0000258 ↗
13. Permeability of concrete with fiber reinforcement and service life predictions10.1617/s11527-007-9249-6 ↗
14. Effect of different types of fibers on the microstructure and the mechanical behavior of Ultra-High Performance Fiber-Reinforced Concretes10.1016/j.compositesb.2015.09.059 ↗
15. Water permeability of reinforced concrete with and without fiber subjected to static and constant tensile loading10.1016/j.cemconres.2012.03.014 ↗
16. Impact resistance of oil palm shells concrete reinforced with polypropylene fiber10.1016/j.conbuildmat.2016.07.026 ↗
17. Properties of cement-fly ash grout admixed with bentonite, silica fume, or organic fiber10.1016/S0008-8846(97)00032-X ↗
18. Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete10.1016/j.ijsbe.2016.05.007 ↗
19. The durability properties of polypropylene fiber reinforced fly ash concrete10.1016/j.matdes.2010.07.011 ↗
20. The effects of polypropylene fibers on the properties of reinforced concrete structures10.1016/j.conbuildmat.2011.08.015 ↗
21. Laboratory study on the effect of polypropylene fiber on durability, and physical and mechanical characteristic of concrete for application in sleepers10.1016/j.conbuildmat.2013.02.076 ↗
22. Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume10.1016/j.compositesb.2012.10.006 ↗
23. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
24. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
25. Discussion on characteristics of high strength fly ash concrete and concrete with ground slag
26. Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)10.1016/j.conbuildmat.2015.08.112 ↗
27. Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC10.1016/j.conbuildmat.2017.04.181 ↗
28. Test Methods of Cement and Concrete Highway Engineering, JTG E30—2005 published the China’s Ministry of Transport, Beijing, 2005.
29. ISO 15148:2002(E), Hydrothermal performance of building materials and products-determination of water absorption coefficient by partial immersion.
30. Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete10.1016/j.cemconres.2017.05.018 ↗
31. Preparation of integral water repellent concrete with addition of alkylalkoxysilane emulsion
32. Experimental study of effect of polypropylene fiber on concrete workability
33. Mechanical and durable behavior of alkaline cement mortars reinforced with polypropylene fibers10.1016/S0008-8846(03)00222-9 ↗
34. The skin of concrete composition and properties
35. Water movement in porous building materials-VII. The sorptivity of mortars10.1016/0360-1323(86)90017-X ↗
36. Capillary absorption of integral water repellent and surface impregnated concrete10.1515/rbm14.20.4-0026 ↗
37. Mehta · 2006
38. Studies on blended Portland cements containing Santorin earth10.1016/0008-8846(81)90080-6 ↗
39. Composition, morphology and nanostructure of C-S–H in 70% white Portland cement–30% fly ash blends hydrated at 55 °C10.1016/j.cemconres.2010.03.012 ↗
40. Interfacial transition zone in concrete10.1016/1065-7355(95)90037-3 ↗
41. Engineered natural fiber reinforced polypropylene composites: influence of surface modifications and novel powder impregnation processing10.1163/156856102760146129 ↗
42. Durability of polypropylene fibers in Portland cement-based composites: eighteen years of data10.1016/S0008-8846(98)00155-0 ↗
43. A multiphase micromechanical model for hybrid fiber reinforced concrete considering the aggregate and ITZ effects10.1016/j.conbuildmat.2016.04.008 ↗
44. Microscopic, physical and mechanical analysis of polypropylene fiber reinforced concrete10.1016/j.msea.2009.07.056 ↗
45. Rapid determination of chloride diffusivity in concrete with blending agents