Fracture properties of asphalt concrete under various displacement conditions and temperatures
Source abstract
Abstract
Abstract Fracture mechanics has been widely applied to asphalt concrete (AC) materials to evaluate the cracking potential of AC pavements under traffic and thermal loadings. While AC materials behave as quasi-brittle at low temperature and high loading rate, its behavior becomes more viscous as temperature increases and/or loading rate decreases. Considerable fracture tests have been developed to capture the fracture properties of AC materials; however, fracture properties may be misinterpreted when using various fracture tests, especially in bending-mode. This would result in an erroneous characterization of AC cracking potential, which leads to a misestimate of pavement service life. The objective of this study is to investigate common fracture test methods for the AC materials, compare the fracture energies from various displacement measurements to capture true fracture property, and examine the effect of temperature on fracture energy and Flexibility Index (FI). Fracture energy from the semi-circular bending (SCB) geometry was compared to that from the disk-shaped compact tension (DCT) test. The effect of misinterpretation of test results on fracture energies was investigated. This study also suggests a proper method to capture fracture properties from the SCB test using the basic understanding of work and energy concepts in physics. The effects of test temperature on (1) fracture energy values, (2) FI, and (3) the overall ability to discriminate the cracking potential of AC mixtures are presented. Results show that while the crack characteristics can be captured more reasonably with a Load-Crack Mouth Opening Displacement (CMOD) curve, the fracture energy is better obtained using load-Load Line Displacement (LLD) curve. Moreover, performing fracture tests at a relatively higher temperature increases the ability to distinguish between various AC mixtures’ cracking potential.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Development of a single-edge notched beam test for asphalt concrete mixtures10.1520/JTE12579 ↗
2. A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material10.1016/j.engfracmech.2006.04.030 ↗
3. Reflective cracking: Modeling fracture behavior of hot-mix asphalt overlays with interlayer systems
4. Using semi circular bending test to evaluate low temperature fracture resistance for asphalt concrete10.1007/s11340-009-9303-0 ↗
5. Fracture characterization of asphalt mixtures with high recycled content using Illinois semicircular bending test method and flexibility index10.3141/2575-14 ↗
6. ASTM. Standard test method for determining fracture energy of asphalt-aggregate mixtures using the disk-shaped compact tension geometry. (2013).
7. AASHTO · 2013
8. AASHTO · 2016
9. Investigation of the fracture resistance of hot-mix asphalt concrete using a disk-shaped compact tension test
10. Son · 2014
11. Walubita · 2010
12. Sousa · 2002
13. Bordelon · 2007
14. Wagoner · 2006
15. Barber, Edoardo, Imad L. Al-Qadi, Filippo Giustozzi, Hasan Ozer. Development of Machine Compliance Factor for the Illinois Flexibility Index Test (I-FIT). No. 18-04786. 2018.
16. Rivera-Perez · 2017
17. Al-Qadi · 2015
18. Al-Qadi, L. Imad, Songsu Son, Thomas Zehr. Development of an Economical Thin, Quiet, Long-Lasting, High Friction Surface Layer for Economical Use in Illinois, Volume 2: Field Construction, Field Testing, and Engineering Benefit Analysis. 2013.
19. Damage zone development in heterogeneous asphalt concrete10.1016/j.engfracmech.2017.06.002 ↗
20. Prediction of pavement fatigue cracking at an accelerated testing section using asphalt mixture performance tests10.1080/10298436.2017.1347435 ↗
21. Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters10.1016/j.conbuildmat.2016.03.144 ↗
22. Al-Qadi · 2017
23. Impact of high asphalt binder replacement on level binder properties for controlling reflective cracking10.3141/2630-15 ↗
24. Early-age performance characterization of hot-mix asphalt overlay with varying amounts of asphalt binder replacement10.1016/j.conbuildmat.2017.07.114 ↗
25. Lippert · 2017