Characterization of processed lightweight aggregate and its effect on physical properties of concrete
Source abstract
Abstract
Abstract The plastic because of its lightweight and flexibility to adopt the required shapes has led in an enormous increase in production of plastic products during recent years. To minimize the negative environmental impacts of plastic waste, many industrial sectors have tried to recycle and utilize the plastic waste. Among the other sectors, concrete industry can be considered as one of the alternatives such as to use the recycled plastic as aggregate replacement in concrete. A processed lightweight aggregates (PLA) has been manufactured using the plastic waste and other local materials using a compression moulding press technique. The detailed characterization of the PLA was also conducted. In addition, the effect of PLA incorporation on the physical properties of concrete along with effect of curing temperature on the compressive strength was also tested. The addition of manufactured aggregate in concrete has increased the Poisson’s ratio, thermal conductivity values while the density, and compressive strength were found to be reduced as compared to control mix. It was also noticed that PLA concrete can be cured at temperatures up to 30 °C, without significantly affecting compressive strength. The PLA has shown the prospective to be used in lightweight concrete applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. EPA · 2014
2. Use of recycled plastics in concrete: a critical review10.1016/j.wasman.2016.03.005 ↗
3. Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios10.1016/j.wasman.2009.05.007 ↗
4. On the mechanical properties of concrete containing waste PET particles10.1016/j.conbuildmat.2013.06.041 ↗
5. Relationship between compressive, splitting tensile and flexural strength of concrete containing granulated waste Polyethylene Terephthalate (PET) bottles as fine aggregate
6. Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate10.1016/j.conbuildmat.2013.11.049 ↗
7. Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete10.1016/j.cemconcomp.2008.01.002 ↗
8. Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes10.1016/j.wasman.2008.06.014 ↗
9. Performance of cement mortar made with recycled high impact polystyrene10.1016/j.cemconcomp.2012.06.014 ↗
10. Use of waste plastic in concrete mixture as aggregate replacement10.1016/j.wasman.2007.08.023 ↗
11. Study of waste plastic mix concrete with plasticizer
12. Physical and mechanical properties of mortars containing PET and PC waste aggregates10.1016/j.wasman.2010.03.028 ↗
13. Valorization of post-consumer waste plastic in cementitious concrete composites10.1016/j.wasman.2006.03.012 ↗
14. An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete10.1016/j.wasman.2009.09.033 ↗
15. Recycling of PET bottles as fine aggregate in concrete10.1016/j.wasman.2010.01.030 ↗
16. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete10.1016/S0008-8846(98)00202-6 ↗
17. Characteristics and properties of lightweight concrete manufactured with cenospheres10.1016/S0008-8846(00)00357-4 ↗
18. Mechanical properties of polymer-modified lightweight aggregate concrete10.1016/S0008-8846(01)00678-0 ↗
19. The use of mixed polymer waste products to produce paving grade asphalt
20. Dunster · 2005 · 1
21. Innovative lightweight synthetic aggregates developed from coal Fly ash
22. Lightweight fly ash-plastic aggregates in concrete10.3141/1775-07 ↗
23. High carbon fly ash/mixed thermoplastic aggregate for use in lightweight concrete (859)
24. Properties of synthetic lightweight aggregates for use in pavement systems
25. Effects of waste PET bottles aggregate on the properties of concrete10.1016/j.cemconres.2004.05.014 ↗
26. Production of recycled plastic aggregates and its utilization in concrete10.1061/(ASCE)MT.1943-5533.0001765 ↗
27. Novel lightweight concrete containing manufactured plastic aggregate10.1016/j.conbuildmat.2017.05.011 ↗
28. Experimental study to investigate the engineering and durability performance of concrete using synthetic aggregates10.1016/j.conbuildmat.2018.04.018 ↗
29. F.K. Alqahtani, M.I. Khan, G. Ghataora, U.S. Patent No. 8,921,463, U.S. Patent and Trademark Office, Washington, DC, 2014.
30. Lightweight concrete containing recycled plastic aggregates
31. MDB, Materials Data Book, Cambridge University-Engineering Department, 2003. https://www.scribd.com/document/304504700/Materials-Data-Book (accessed online on 20th July, 2019).
32. Sabic · 2009
33. Sabic · 2013
34. ASTM International · 2015
35. J.E. Partanen, S.W. Ellis, D. Bartell, Incorporation of plastic scrap in asphalt compositions-U.S. Patent 7,772,302 B2, 2010.
36. ASTM D4703-15 · 2015
37. Manufactured sands from hardrock quarries: environmental solution or dilemma for southeast Queensland10.1046/j.1440-0952.2000.00770.x ↗
38. Rached · 2009
39. Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles10.1016/j.conbuildmat.2009.02.036 ↗
40. Slabaugh · 2007
41. ASTM C33/C33M-16 · 2016
42. ASTM International · 2014
43. Beneficial use of recycled materials in concrete mixtures10.1016/j.conbuildmat.2011.10.024 ↗
44. Thomas · 1998
45. Domone · 2010
46. Klieger · 1994 · vol. 169
47. A new method to determine the density and water absorption of fine recycled aggregates10.1590/S1516-14392013005000074 ↗
48. Investigation of the use of waste plastic as an aggregate for lightweight concrete
49. Gambhir · 2013
50. ASTM D2584-11 · 2011
51. ASTM International · 2016
52. ASTM C39/C39M-16 · 2016
53. BS EN 12390-7:2009 · 2009
54. ASTM C469/C469M-14 · 2014
55. ASTM C177-13 · 2013
56. Concrete blocks for thermal insulation in hot climate10.1016/j.cemconres.2004.08.018 ↗
57. Factors affecting the thermal properties of concrete and applicability of its prediction models10.1016/S0360-1323(01)00061-0 ↗
58. Thermal conductivity of concrete – a review10.1016/j.jobe.2018.07.002 ↗
59. The influence of moisture content on the thermal conductivity of external thermal mortars10.1016/j.conbuildmat.2016.12.166 ↗
60. American Concrete Institute (ACI) Committee 213 · 2003
61. Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes10.1016/j.conbuildmat.2012.04.105 ↗
62. Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate10.1016/j.conbuildmat.2012.02.098 ↗
63. Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates10.1016/j.cemconcomp.2012.08.017 ↗
64. Structures and physical properties of cement paste