Experimental and analytical study on uniaxial compressive fatigue behavior of self-compacting rubber lightweight aggregate concrete
Source abstract
Abstract
Abstract In view of the excellent deformation capacity and energy absorption capacity, rubber particles had potential possibility to improve the fatigue properties of lightweight aggregate concrete (LC). However, the fatigue properties of LC containing rubber particles were not adequately understood. This paper focused on the effect of rubber particles on the uniaxial compressive fatigue properties of self-compacting rubber lightweight aggregate concrete (SCRLC). The results of uniaxial compressive fatigue tests indicated that fatigue life and fatigue strain of SCRLC added generally with increase of rubber particles substitution percentage, fatigue strain of SCRLC also raised with number of cycles increased. Analyses results indicated that the fatigue life of SCRLC conformed to two-parameter Weibull distribution. Based on the experimental results, fatigue equation of SCRLC was established by double logarithmic fatigue equation. From the curves of lgS-lgNf of SCRLC, it could be discovered that increasing of rubber particles substitution percentage in SCRLC resulted in a decrease of fatigue limit strength, but the stress level at fatigue life of 2 × 106 increased firstly and then decreased. The highest stress level of SCRLC would be obtained as rubber particles substitution percentage was 30%. By comprehensive consideration, under the same strength level, the fatigue properties of SCRLC was better than that of LC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Deformation of concrete under high-cycle fatigue loads in uniaxial and eccentric compression10.1016/j.conbuildmat.2017.03.023 ↗
2. PhyBaLCHT – influence of indentation force on the results of cyclic hardness tests and investigations of comparability to uniaxial fatigue loading10.1016/j.ijfatigue.2018.09.025 ↗
3. An experimental and analytical study on fatigue damage in concrete under variable amplitude loading10.1016/j.ijfatigue.2018.02.014 ↗
4. Pervious concrete under flexural fatigue loading: Performance evaluation and model development10.1016/j.conbuildmat.2019.02.111 ↗
5. Enhanced assessment rule for concrete fatigue under compression considering the nonlinear effect of loading sequence10.1016/j.ijfatigue.2019.04.027 ↗
6. Proposal for the fatigue strength of concrete under cycles of compression10.1016/j.conbuildmat.2016.01.007 ↗
7. Fatigue life prediction method of concrete based on energy dissipation10.1016/j.conbuildmat.2017.04.030 ↗
8. Flexural-fatigue characteristics of pervious concrete: statistical distributions and model development10.1016/j.conbuildmat.2017.07.081 ↗
9. Behaviour of concrete filled glass fibre-reinforced polymer tubes under static and flexural fatigue loading10.1016/j.conbuildmat.2019.03.321 ↗
10. Experimental study on fatigue properties of normal and rubberized self-compacting concrete under bending10.1016/j.conbuildmat.2019.01.207 ↗
11. Fatigue performance of flexible steel fibre reinforced rubberised concrete pavements10.1016/j.engstruct.2019.05.040 ↗
12. Properties and utilizations of waste tire rubber in concrete: a review10.1016/j.conbuildmat.2019.07.108 ↗
13. Compressive fatigue performance of fiber-reinforced lightweight concrete with high-volume supplementary cementitious materials10.1016/j.cemconcomp.2016.07.007 ↗
14. Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire10.1016/j.jclepro.2017.02.046 ↗
15. Effects of rubber particles on mechanical properties of lightweight aggregate concrete10.1016/j.conbuildmat.2015.05.038 ↗
16. Properties of self-compacting concrete (SCC) with recycled tire rubber aggregate: a comprehensive study10.1016/j.jclepro.2019.117707 ↗
17. Mechanical and fatigue performance of rubber concrete10.1016/j.conbuildmat.2013.05.055 ↗
18. Internal stress development and fatigue performance of normal and crumb rubber concrete10.1061/(ASCE)MT.1943-5533.0001000 ↗
19. Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement10.1016/j.conbuildmat.2015.07.042 ↗
20. Fatigue analysis of crumble rubber concrete-steel composite beams based on XFEM
21. Potential use of rubber as aggregate in structural reinforced concrete element – a review10.1016/j.engstruct.2019.03.031 ↗
22. Flexural-fatigue properties of sustainable pervious concrete pavement material containing ground tire rubber and silica fume
23. Flexural fatigue behavior of self compacting rubberized concrete10.1016/j.conbuildmat.2013.02.077 ↗
24. Composition and microstructure of 50-year lightweight aggregate concrete (LWAC) from Nanjing Yangtze River bridge (NYRB)10.1016/j.conbuildmat.2019.05.015 ↗
25. Mechanical and thermophysical properties of lightweight aggregate concretes10.1016/j.conbuildmat.2015.08.015 ↗
26. Flexural fatigue behavior of ultra-lightweight cement composite and high strength lightweight aggregate concrete10.1016/j.conbuildmat.2018.03.276 ↗
27. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete10.1016/j.conbuildmat.2012.02.053 ↗
28. Fresh and mechanical properties of self-compacting rubber lightweight aggregate concrete and corresponding mortar
29. Properties of the mechanical in controlled low-strength rubber lightweight aggregate concrete (CLSRLC)10.1016/j.conbuildmat.2016.03.016 ↗
30. Utilization of waste clay bricks as coarse and fine aggregates for the preparation of lightweight aggregate concrete10.1016/j.jclepro.2018.08.103 ↗
31. A mix-design method for lightweight aggregate self-compacting concrete based on packing and mortar film thickness theories10.1016/j.conbuildmat.2017.09.141 ↗
32. Mix design of structural lightweight self-compacting concrete incorporating coarse lightweight expanded clay aggregates10.1016/j.conbuildmat.2018.01.161 ↗
33. Multi-axial test and failure criterion analysis on self-compacting lightweight aggregate concrete10.1016/j.conbuildmat.2019.04.236 ↗
34. The effect of pumice powder on the self-compactability of pumice aggregate lightweight concrete10.1016/j.conbuildmat.2015.11.043 ↗
35. Fatigue performance of waste rubber concrete for rigid road pavements10.1016/j.conbuildmat.2018.05.030 ↗
36. Mechanical properties of preplaced lightweight aggregates concrete10.1016/j.conbuildmat.2019.05.010 ↗
37. Effect of the loading frequency on the compressive fatigue behavior of plain and fiber reinforced concrete10.1016/j.ijfatigue.2014.08.005 ↗
38. Influence of the pore morphology of high strength concrete on its fatigue life10.1016/j.ijfatigue.2018.03.006 ↗
39. Role of longitudinal reinforcement on the behavior of under reinforced concrete beams subjected to fatigue loading10.1016/j.ijfatigue.2019.03.047 ↗
40. Fatigue behavior of orthotropic steel bridge stiffened with ultra-high performance concrete layer10.1016/j.jcsr.2019.02.025 ↗
41. ASTM C 39, Standard test method for compressive strength of cylindrical concrete specimens, West Conshohocken, PA, 2012.
42. Detecting and evaluation of fatigue damage in concrete with industrial computed tomography technology10.1016/j.conbuildmat.2019.07.016 ↗
43. Pervious concrete under flexural fatigue loading: performance evaluation and model development10.1016/j.conbuildmat.2019.02.111 ↗
44. Number of tests and corresponding error in concrete fatigue10.1016/j.ijfatigue.2018.06.022 ↗
45. M. Castro, J.A. Sánchez, Estimation of asphalt concrete fatigue curves-a damage theory approach, 22 (6) (2008) 1232–1238.10.1016/j.conbuildmat.2007.01.012 ↗
46. Updating a nonlinear discriminant function estimated from a mixture of two Weibull distributions10.1016/0895-7177(94)90015-9 ↗
47. Fatigue performance of plain and steel fibre reinforced self compacting concrete using S-N relationship10.1016/j.engstruct.2014.05.010 ↗
48. Flexural fatigue-life distributions of plain and fibrous concrete at various stress levels10.1061/(ASCE)0899-1561(2005)17:6(650) ↗
49. Fatigue strength of steel fibre reinforced concrete in flexure10.1016/S0958-9465(02)00102-6 ↗