Enhancement of permanent deformation resistance of modified asphalt concrete mixtures with nano-high density polyethylene
Source abstract
Abstract
Abstract The present research was carried out to inspect the influence of Nano-High Density Polyethylene (Nano-HDPE) particles and Styrene-Butadiene-Styrene (SBS) on the rheological characteristics of modified asphalt binders and performance of modified asphalt concrete mixtures. In this study, the base asphalt binder of the PG (64-16) grade was modified with Nano-HDPE and SBS polymers at a concentration of 3% and 5% by weight of total asphalt binder content. The Superpave dynamic shear rheometer (DSR), rolling thin film oven (RTFO), rotational viscosity (RV), pressure aging vessel (PAV) and bending beam rheometer (BBR) were conducted to evaluate performance grade of base and modified asphalt binders, also gyratory compactor was used to find optimum asphalt content. Roller compactor and wheel track tests were utilized to assess the rutting performance of modified asphalt mixture with Nano and SBS polymers, and the Indirect Tension Test (IDT) was used to assess the strength of mixtures before and after water conditioning. The results of the study show that Nano-HDPE particles have a considerable influence on improving Performance Grade (PG) of the binder, but at an equal concentration of polymer, it is not as effective as the SBS. However, the HDPE shows a significant advantage in keeping the viscosity of the modified binder at significantly lower levels and thus allowing much lower mixing and compaction temperatures as determined by the equ-viscous standard procedure. Although the PG grades of the binders showed the SBS to be more effective in improving the high-temperature grade than the HDPE, the mixture rutting performance shows that the HDPE modified binders provide better rutting resistance at 3% and 5% than the SBS modified binders. This finding shows that binder testing of G*/sin δ only could give a misleading indication of the true contribution of modified binders to rutting resistance as polymers could improve mixtures in different mechanisms than what is measure with binder PG testing. The IDT testing also shows that the strength of the mixtures produced with the modified binders at 25 °C is superior to the control mixture, with the HDPE providing slightly higher strength values before and after water conditioning. The overall results of the study show that HDPE can be used as a viable modifier requiring lower mixing and compaction temperature and equal or significantly better rutting and strength performance than conventional SBS Modifier. The study also highlights the need to check mixture performance when using specialty modifiers and not depend on only DSR testing as specified in the Superpave PG grading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Assessment Mixing and Compaction Temperatures for Modified HMA Using Superpave High Shear Viscosity Methods
2. Effects of functionalized polyethylene and styrene butadiene styrene polymers on performance grade of local asphalt binder10.31026/j.eng.2012.06.04 ↗
3. N. Bala, I. Kamaruddin, in: Engineering Challenges for Sustainable Future. (ROUTLEDGE in association with GSE Research, 2016), vol. 395, pp. 395–399.10.9774/gleaf.9781315375052_75 ↗
4. Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance
5. Enhanced aggregate-asphalt adhesion and stability of local hot mix asphalt10.30684/etj.29.10.15 ↗
6. Effect of cross-linkers on the performance of polyethylene-modified asphalt binders10.1680/jcoma.16.00021 ↗
7. Investigating the influence of using nano-composites on storage stability of modified bitumen and moisture damage of HMA10.1080/10916466.2017.1292292 ↗
8. K. Chong, Nanotechnology and information technology in civil engineering, towards a vision for information technology in civil engineering (2004) 1-9.10.1061/40704(2003)27 ↗
9. Rheological properties of modified asphalt binder with nanosilica and SBS, in IOP Conference Series
10. Developments of nano materials and technologies on asphalt materials–a review10.1016/j.conbuildmat.2017.03.158 ↗
11. Thermal and rheological properties of nanoparticle modified asphalt binder at low and intermediate temperature range10.1080/10916466.2016.1276589 ↗
12. Beneficial role of nanosilica in cement based materials–a review10.1016/j.conbuildmat.2013.05.052 ↗
13. Rheological properties and chemical bonding of asphalt modified with nanosilica10.1061/(ASCE)MT.1943-5533.0000690 ↗
14. Performance evaluation of dry process crumb rubber-modified asphalt mixtures with nanomaterial10.1080/14680629.2017.1302356 ↗
15. Nanomaterials applied in asphalt modification: a review10.1016/j.jmst.2013.04.008 ↗
16. Physical and rheological characteristics of polymer modified bitumen with nanosilica particles10.1007/s13369-015-1964-7 ↗
17. Performance evaluation of linear and nonlinear nanocomposite modified asphalts10.1016/j.conbuildmat.2012.03.010 ↗
18. Characterization of the rate of change of rheological properties of nano-modified asphalt10.1016/j.conbuildmat.2015.08.069 ↗
19. The characteristics of hot mixed asphalt modified by nanosilica10.1080/10916466.2016.1258412 ↗
20. Bahia · 2001 · 1
21. Development of an IDEAL cracking test for asphalt mix design and QC/QA10.1080/14680629.2017.1389082 ↗