Prediction of unsaturated shear strength of an adobe soil from the soil–water characteristic curve
Source abstract
Abstract
Abstract This paper studied the unsaturated shear strength properties of a soil with the gradation characteristics of the material typically used in adobe construction. The main goal was to predict the unsaturated shear strength of the adobe soil using the soil–water characteristic curve (SWCC) and the effective cohesion and friction angle of the material. Specimens were trimmed from adobe bricks made according to the traditional technique of the southwestern region of the United States. The SWCC of the adobe soil was constructed using data obtained with the filter paper test. The effective cohesion and friction angle were found to be 11.7 kPa and 31.4°, respectively, from the results of consolidated drained direct shear tests. In addition, unconsolidated undrained direct shear tests were done on specimens at different water contents to determine the apparent shear strength parameters. The predicted shear strength was found to increase significantly with decreasing water content, and the strength increase was approximately 350 kPa between near saturation condition and water content of 6.01%. The predicted failure envelopes in the shear strength–matric suction plane were nonlinear; their initial slope was close to the (saturated) effective friction angle, and the slope decreased as the suction increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Soil and Unsaturated Flow · Landslides and related hazards · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Deterioration and pathology of earthen architecture
2. Monitoring moisture at Tumacacori
3. E.L. Tolles, F.A. Webster, A. Crosby, E.E. Kimbro. Survey of damage to historic adobe buildings after the January 1994 Northridge Earthquake. GCI Scientific Program Reports, Los Angeles, The Getty Conservation Institute, 1996.
4. J.R. Clifton, F.L. Davis, Mechanical properties of adobe. U.S. Nat. Bur. Stand. Tech. Note 996. U.S. Department of Commerce, Washington DC, U.S. Government Printing Office, May 1979.10.6028/NBS.TN.996 ↗
5. A preservation monitoring system at Tumacacori National Monument
6. Earthquake damage to historic and older adobe buildings during the 1994 Northridge, California Earthquake
7. Application of stability-based retrofit measures on some historic and older adobe buildings in California
8. Applied unsaturated soil mechanics, state of the art report
9. Characterization of unsaturated soils: the importance of response to wetting
10. The shear strength of unsaturated soils10.1139/t78-029 ↗
11. The relationship of the unsaturated soil shear to the soil-water characteristic curve10.1139/t96-065 ↗
12. Model for the prediction of shear strength with respect to soil suction10.1139/t96-060 ↗
13. Shear strength-suction relationship of compacted Ankara clay10.1016/j.clay.2009.08.028 ↗
14. Measurements of the shear strength of an expansive soil by combining a filter paper method and direct shear tests10.1520/GTJ103342 ↗
15. Lu · 2004
16. The axistranslation and osmotic techniques in shear testing of unsaturated soils: a comparison10.3208/sandf.47.675 ↗
17. Effective stress in unsaturated soils: review with new evidence10.1061/(ASCE)1532-3641(2004)4:2(115) ↗
18. Laboratory filter paper suction measurements10.1520/GTJ10090J ↗
19. Standard test method for the measurement of soil potential (suction) using filter paper
20. Murray · 2010
21. R.J. Brooks, A.T. Corey, Hydraulic properties of porous media. Hydrology Papers No. 3, Colorado State Univ., Fort Collins, March 1964.
22. A closed-form equation for predicting the hydraulic conductivity of unsaturated soils10.2136/sssaj1980.03615995004400050002x ↗
23. Equations for the soil-water characteristic curve10.1139/t94-061 ↗
24. Standard test method for direct shear test of soils under consolidated drained conditions
25. Standard classification of soils for engineering purposes
26. Factors affecting the filter paper method for total and matric suction measurements10.1520/GTJ11094J ↗