journal article·2014-11

Influence of polymer modification on asphalt binder dynamic and steady flow viscosities

F. Cardone, G. Ferrotti, F. Frigio, F. Canestrari

Publisher page

Abstract

Abstract Asphalt pavement performance such as rutting, crack initiation and propagation as well as fatigue behaviour are substantially affected by the rheological properties of the bitumen. In this sense, the use of polymer modification in road paving applications has been growing rapidly over the last decade as it allows significant enhancements in bitumen properties with consequent improvement in road service life. In fact, the use of polymer modified bitumens (PMBs) leads to pavements characterized by higher resistance to rutting and thermal cracking and lower fatigue damage, stripping and thermal susceptibility. This paper presents a laboratory investigation concerning the effect of polymer modification on the flow behaviour of bitumens. Two different polymers, an elastomer and a plastomer, were used as bitumen modifying agents at three different percentages (2%, 4% and 6% by bitumen weight). Oscillatory mechanical analysis as well as viscosity measurements under steady state conditions were performed taking into account different testing parameters such as temperature, loading frequency and shear rate. The results confirm that the rheological properties of PMBs are strongly influenced by polymer nature and polymer content. The bitumen viscosity on the dynamic domain was combined with that in the steady-state domain, confirming the applicability of the Cox–Merz relationship for the plain bitumen and the PMBs with low polymer content. Finally, the Cross and the Carreau models were found to be suitable to fit the steady state and the dynamic results in order to determine the viscosity function of the investigated bitumens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Brown · 2009
2. Influence of the processing conditions on the rheological behaviour of the polymer-modified bitumen10.1016/S0016-2361(03)00065-6 ↗
3. Polymer blends for enhanced asphalt binders10.1002/pen.10568 ↗
4. Rheological evaluation of ethylene vinyl acetate polymer modified bitumens10.1016/S0950-0618(02)00103-4 ↗
5. Improved performance of paving asphalts by polymer modification
6. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
7. Tsantilis LEvaluation of the anti-rutting potential of polymer-modified binders by means of creep-recovery shear tests10.1617/s11527-012-0006-0 ↗
8. Applicability of the Cox–Merz relationship for asphalt binder10.1016/j.conbuildmat.2012.07.020 ↗
9. Correlation of dynamic and steady flow viscosities10.1002/pol.1958.1202811812 ↗
10. Rheological properties of styrene butadiene styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
11. Asphaltic binder rheology, asphalt concrete rheology and asphalt concrete mix properties
12. Asphalt modified by SBS triblock copolymer: structures and properties10.1002/pen.10567 ↗
13. Influence of styrene–butadiene–styrene polymer modification on bitumen viscosity10.1016/S0016-2361(97)00144-0 ↗
14. Effects of temperature and shear rate on viscosity of Sasobit® – modified asphalt binders
15. Mezger · 2011
16. Viscosity function in polymer – modified asphalts10.1016/S0021-9797(02)00197-2 ↗
17. Intrinsic resistance to non-reversible deformation in modified asphalt binders and its relation with specification criteria10.1016/j.conbuildmat.2011.03.026 ↗
18. Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems10.1016/0095-8522(65)90022-X ↗
19. A nonlinear viscoelastic model for polymer solutions and melts-II10.1016/0009-2509(68)80024-7 ↗
20. Flow characteristics and viscosity functions in asphalt binders modified by wax