journal article·2014-03

Strength characteristics and failure criterion of plain recycled aggregate concrete under triaxial stress states

Zhen-jun He, Jia-xing Zhang

Publisher page

Abstract

Abstract Triaxial tests were performed on 150 mm × 150 mm × 150 mm cubic specimens of plain structural recycled aggregate concrete (RAC) for two replacement percentages of recycled coarse aggregate by mass at all kinds of stress ratios, using a large static–dynamic true triaxial machine. Friction-reducing pads, using two layers of plastic membrane with mobil lubricants were placed between the compressive loading plate and the specimens; the tensile loading planes of concrete samples were processed by an attrition machine, and then the samples were glued-up with the loading plate with structural glue. The failure mode characteristic of specimens and the direction of the cracks were observed and described. The three principally static strengths in the corresponding stress state were measured. The influence of the replacement percentages of the recycled coarse aggregate and stress ratios on the triaxial strengths of RAC was also analyzed. The experimental results showed that the ratios of the triaxial to its corresponding uniaxial compressive strength for the two RAC are higher than that of the conventional concrete (CC), especially under triaxial compression; moreover, they are dependent on the replacement percentages of recycled coarse aggregate, the stress states and stress ratios; however, the differences of tensile–compressive ratios between the two RAC and CC are not significant. On this basis, a new failure criterion with the six parameters is proposed for plain RAC under multiaxial stress states. It provides the experimental and theoretical foundations for strength analysis of RAC structures subject to complex loads.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Experimental study on interfacial strength of the high performance recycled aggregate concrete
2. Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates10.1016/j.conbuildmat.2004.03.005 ↗
3. Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach10.1016/j.cemconres.2004.10.025 ↗
4. Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete10.1016/S1644-9665(12)60093-4 ↗
5. Durability of recycled aggregate concrete10.1016/j.conbuildmat.2012.11.106 ↗
6. Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate10.1016/j.cemconcomp.2011.08.004 ↗
7. Structural recycled concrete: behaviour under low loading rate10.1016/j.conbuildmat.2011.08.010 ↗
8. Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates10.1016/j.conbuildmat.2010.02.031 ↗
9. Mechanical properties of concrete produced with recycled coarse aggregates – influence of the use of superplasticizers10.1016/j.conbuildmat.2013.03.011 ↗
10. Properties of plain concrete made with mixed recycled coarse aggregate10.1016/j.conbuildmat.2012.07.045 ↗
11. Use of recycled concrete aggregate in fly-ash concrete10.1016/j.conbuildmat.2011.07.023 ↗
12. Behavior of concrete under biaxial stresses
13. Mechanical properties of confined recycled aggregate concrete under axial compression10.1016/j.conbuildmat.2011.06.062 ↗
14. On recycled concrete confined by GFRP tube under axial compression
15. Mahgoub M, Ala Saadeghvaziri M, Jamali A. Behavior of confined recycled aggregate concrete. In: First middle east conference on smart monitoring assessment and rehabilitation of civil structures. Dubai (UAE); 2011.
16. The National Standards Compilation Group of the People’s Republic of China. GB175-1999 Portland Cement and Ordinary Portland Cement. Beijing: China Standards Press; 1999. [in Chinese].
17. The National Standards Compilation Group of the People’s Republic of China. GBT 1596-2005 Fly ash used for cement and concrete. Beijing: China Standards Press; 2005. [in Chinese].
18. The National Standards Compilation Group of the People’s Republic of China. GB/T 27690-2011 Silica fume for cement mortar and concrete. Beijing: China Standards Press; 2012. [in Chinese].
19. The National Standards Compilation Group of the People’s Republic of China. GBT 25177-2010 Recycled coarse aggregate for concrete. Beijing: China Standards Press; 2010. [in Chinese].
20. The Local Standards Compilation Group of the People’s, Republic of China. DB11-803-2011 Code for design of recycled concrete structure. Beijing: Beijing Municipal Commission of Urban, Planning; 2011. [in Chinese].
21. China Association for Engineering Construction Standardization. CECS207: 06 Technical specification for application of high performance concrete. Beijing: China Plan Publishing Company; 2006. [in Chinese].
22. The National Standards Compilation Group of the People’s Republic of China. GBJ82-85 Testing Methods of Long-Term and Long-Lasting Performance of Ordinary Concrete. Beijing: China Architecture and Building Press; 1985. [in Chinese].
23. The National Standards Compilation Group of the People’s Republic of China. GB/T 50081-2002 Standard for Test Method of Mechanical Properties on Ordinary Concrete. Beijing: China Architecture and Building Press; 2003. [in Chinese].
24. Qin · 2003
25. Deformation and strength of concrete under triaxial loading
26. Behavior of concrete under biaxial stresses
27. Strength of concrete under biaxial compressive loading
28. Compressive strength of plain concrete under multiaxial loading conditions
29. Strain and ultimate strength of concrete under triaxial stress
30. Behavior of concrete under multiaxial stress states