journal article·2015-01

A mathematical model for predicting stripping potential of Hot Mix Asphalt

H.F. Haghshenas, A. Khodaii, M. Khedmati, S. Tapkin

Publisher page

Abstract

Abstract Stripping – the most important mode of Hot Mix Asphalt (HMA) failure – is a problematic issue in the pavement performance and its maintenance. Identification and quantification of the pertinent parameters influencing on stripping process is a prerequisite for dealing with it effectively. Previous studies on stripping potential of HMA have focused on this issue based on empirical/semi-empirical models. In the present work Response Surface Methodology (RSM) was used for the study and optimization of pertinent factors, namely bitumen content employed, grading and lime content, in the stripping process of HMA. Tensile Strength Ratio (TSR) was chosen as the response for the evaluation of stripping potential of HMA using a Central Composite Design (CCD). The statistical analyses showed that second order polynomial models can successfully describe the relationship between the response and factors and the maximum Tensile Strength Ratio (TSR) is achieved at 5.73% bitumen content, 1.84% lime content and 65.30% of the materials passing sieve size 4.75 mm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A review of state of the art on stripping phenomenon in asphalt concrete10.1016/j.conbuildmat.2012.08.033 ↗
2. Hydrated lime effect on moisture susceptibility of warm mix asphalt10.1016/j.conbuildmat.2012.04.073 ↗
3. The effects of damage evaluation techniques on the prediction of environmental damage in asphalt mixtures10.1016/j.buildenv.2005.08.005 ↗
4. Effect of anti-stripping additives on environmental damage of bituminous mixtures10.1016/j.buildenv.2005.05.017 ↗
5. Terrel RL, Al Swailmi S. Water sensitivity of asphalt-aggregate mixes. SHRP-A-403; 1994, ISBN: 0-309-05820-1, Product No. 1024.
6. Identification of moisture-susceptible asphalt concrete mixes using modified environmental conditioning system
7. Effect of moisture damage on material properties and fatigue resistance of asphalt mixtures10.3141/1891-07 ↗
8. Kandhal PS. Moisture susceptibility of HMA mixes, identification of problem and recommended solutions. National Center for Asphalt Technology, NCAT Report, No. 92-1. Auburn University: Alabama; 1992.
9. Effects of various additives on the moisture damage sensitivity of asphalt mixtures10.1016/j.conbuildmat.2004.05.003 ↗
10. Field and laboratory investigation of stripping in asphalt pavements: state of the art report
11. Austroad asphalt test, stripping potential of asphalt-tensile strength ratio, Austroad National Asphalt Research Co-ordination Group, Australian Asphalt Pavement Association; 2003.
12. Santucci L. Moisture sensitivity of asphalt pavement, technology transfer program. Institute of Transportation Studies, Pavement Research Center, UC Berkeley; 2003.
13. Kiggundu BM, Roberts FL. Stripping in HMA mixtures: state of the art and critical review of test methods. NCAT report 88-2, national Center for Asphalt Technology; September 1988.
14. Asphalt Institute. Mix design methods for asphalt concrete. Manual series no. 2 (MS-2). 6th ed. USA; 1993.
15. AASHTO T283. Standard method of test for resistance of compacted Hot Mix Asphalt (HMA) to moisture-induced damage. American Association of State Highway and Transportation Officials; 2007.
16. Application of response surface methodology to evaluate stone matrix asphalt stripping potential10.1007/s12205-013-1698-6 ↗
17. Effect of grading and lime content on HMA stripping using statistical methodology10.1016/j.conbuildmat.2012.02.025 ↗
18. Moisture susceptibility of warm mixasphalt: a statistical analysis of the laboratory testing results10.1016/j.conbuildmat.2013.10.073 ↗
19. Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated bitumen10.1016/j.conbuildmat.2008.12.001 ↗
20. The use of constrained and unconstrained optimization models in grading design of hot mix asphalt mixture10.1016/j.conbuildmat.2010.06.050 ↗
21. Stochastic simulation of the influence of variation of mineral material grading and dose weight on the homogeneity of hot-mix asphalt10.1016/j.conbuildmat.2007.07.001 ↗
22. Impact of bitumen and aggregate composition on stripping in bituminous mixtures10.1007/s11527-005-9040-5 ↗
23. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage10.1016/j.conbuildmat.2007.07.009 ↗
24. Bradley N. The response surface methodology. Master thesis. Department of Mathematical Sciences, Indiana University of South Bend; 2007.
25. Montgomery · 2006
26. Alvarez LF. Design optimization based on genetic programming. Approximation model building for design optimization using the response surface methodology and genetic programming, Doctoral thesis. UK: University of Bradford; 2000.
27. Haghshenas HF, Khodaii A, Mehrara A, Dehnad MH, Ahari AS. Frequency and temperature interactive effects on hot mix permanent deformation using response surface methodology. J Mater Civil Eng (ASCE) 2013. http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0000894 [in press].10.1061/(ASCE)MT.1943-5533.0000894 ↗
28. Statistical evaluation of hot mix asphalt resilient modulus using a central composite design
29. Kavussi A, Qorbani M, Khodaii A, Haghshenas HF. Quantification of parameters affecting moisture resistance of warm mix asphalt using response surface methodology. In: IJPC − international journal of pavements conference. São Paulo, Brazil; 2013.
30. Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method10.1016/j.conbuildmat.2013.06.023 ↗
31. ASTM D3515-01. Standard specification for hot-mixed, hot-laid bituminous paving mixtures. American Society for Testing and Materials; 2001.
32. Minitab® 15.1.30.0.© 2007 Minitab Inc.