Research on the dynamic compressive test of highly fluidized geopolymer concrete
Source abstract
Abstract
Abstract Slag and fly ash were used in the fabrication of geopolymer concrete (GC), sodium hydroxide (NaOH, NH) and sodium carbonate (Na 2 CO 3 , NC) were used for slag and fly ash activation, then highly fluidized C30 GC was prepared. Φ 100 mm SHPB apparatus was improved by the pulse shaper technique, and the dynamic stress equilibrium and nearly constant strain rate loading were realized. Based on this, the dynamic compressive mechanical properties, including strength, deformation and energy absorption property, of GC were tested, in addition, the mechanism of dynamic properties of the GC was primarily analyzed. The results indicate that, dynamic compressive mechanical properties of GC exhibit strong strain rate dependency; dynamic strength increase factor increases approximately linearly with the logarithm of the average strain rate; the peak strain increases firstly and decreased later with the rising of stain rate, 66.7 s −1 is the critical strain rate between impact toughness and impact embrittlement; from an energy perspective, the correlation between specific energy absorption and stain rate is obvious and the equation type is binomial curve.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · High-Velocity Impact and Material Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Shi · 2006
2. Chloride diffusion in ordinary, blended, and alkali-activated cement pastes and its relation to other properties10.1016/S0008-8846(00)00406-3 ↗
3. Effects of type and dosage of alkaline activator and temperature on the properties of alkali-activated slag mixtures10.1016/j.conbuildmat.2006.07.002 ↗
4. Immobilization of stimulated high level wastes into AASC waste form10.1016/0008-8846(94)90094-9 ↗
5. Stabilization/solidification of hazardous and radioactive wastes with alkali activated cements10.1016/j.jhazmat.2006.05.008 ↗
6. Phase transformation on heating of an aged cement paste10.1016/j.tca.2003.11.057 ↗
7. Micro-cracking and strength development of alkali activated slag concrete10.1016/S0958-9465(01)00003-8 ↗
8. Sodium silicate-based, alkali-activated slag mortars: Part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
9. New building materials from fly ash based light weight inorganic polymer10.1016/j.conbuildmat.2005.06.052 ↗
10. Coal fly ash as raw material for the manufacture of geopolymer-based products10.1016/j.wasman.2007.02.001 ↗
11. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
12. The thermal evolution of metakaolin geopolymers: Part 2-Phase stability and structural development
13. Information on http://www.istis.sh.cn.
14. Concrete containing ternary blended binders: resistance to chloride ingress and carbonation10.1016/S0008-8846(97)00075-6 ↗
15. Hydraulic activity of municipal solid waste incinerator fly-slag-blended eco-cement10.1016/S0008-8846(00)00423-3 ↗
16. Hydraulic activity of water-cooled and air cooled slag at different temperatures10.1016/S0008-8846(00)00462-2 ↗
17. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
18. Impact characterization of basalt fiber reinforced geopolymeric concrete using a 100-mm-diameter split Hopkinson pressure bar
19. Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar10.1007/BF02411056 ↗
20. Oscillation elimination in the Hopkinson bar apparatus and resultant complete dynamic stress strain curves for rocks10.1016/S1365-1609(00)00037-X ↗
21. Fracture characteristics of rock fragmentation at strain rate of 100–102s−110.1007/s11771-006-0126-1 ↗
22. Determination of early flow stress for ductile specimens at high strain rates by using a SHPB10.1007/s11340-007-9048-6 ↗
23. Dynamic and quasi-static compressive response of porcine muscle10.1016/j.jbiomech.2007.02.001 ↗
24. Mechanical characterization at intermediate strain rates for rate effects on an epoxy syntactic foam10.1016/j.ijmecsci.2007.04.003 ↗
25. Rayleigh · 1894
26. Xibing · 1994
27. Numerical simulation and spectral analysis of dispersion effect of stress pulse in SHPB tests
28. Critical appraisal of limiting strain rates for compression testing of ceramics in a split hopkinson pressure bar10.1111/j.1151-2916.1994.tb06987.x ↗
29. Thickness effect of pulse shaper on dynamic stress equilibrium and dynamic deformation behavior in the polycarbonate using SHPB technique
30. Impact behavior of plain concrete in uniaxial compression
31. Influence of aggregate on the compression properties of concrete under impact10.1007/BF02327766 ↗
32. Comparison of uniaxial deformation in shock and static loading of three rocks10.1029/JB076i020p04913 ↗
33. The rule of bulking in brittle failure under rapid compression10.1016/0148-9062(76)91284-5 ↗
34. About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test10.1016/S0020-7683(02)00526-7 ↗
35. Moisture and strain rate effects on concrete strength
36. Shouwen · 1997
37. Strain-rate-dependent constitutive equation for concrete10.1115/1.2842350 ↗
38. Tongxi · 2005