journal article·2012-10

Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete

Cenk Karakurt, İlker Bekir Topçu

Publisher page

Abstract

Abstract In this study, influence of blended cements produced with different types of pozzolans on rebar corrosion and high temperature resistance of concrete was investigated. For this reason, natural zeolite (Z), fly ash (FA), and ground granulated blast furnace slag (GBFS) were used in different types of blended cement production. Accelerated rebar corrosion tests and high temperature experiments were carried out to obtain the durability performance of these cements. According to the variation of corrosion current, FA and GBFS was observed to inhibit positively. However, the results of microstructure analysis on concrete specimens showed that the performance of FA is better than other additives used in the study under the effect of high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A Study on the hydration rate of natural zeolite blended cement pastes
2. Use of zeolite, coal bottom ash and fly ash as replacement materials in cement production10.1016/S0008-8846(03)00063-2 ↗
3. Utilization of fly ash in a geopolymeric material10.1016/S0883-2927(02)00005-7 ↗
4. Tokyay · 2003
5. Arslan · 2001
6. Effect of ground granulate blast-furnace slag on corrosion performance of steel embedded in concrete10.1016/j.matdes.2010.01.057 ↗
7. Water permeability and chloride permeability of high-strength lightweight aggregate concrete10.1016/S0008-8846(01)00738-4 ↗
8. Influence of ggbs on durability and corrosion behavior of reinforced concrete10.1016/j.matchemphys.2005.03.043 ↗
9. Influence of mineral admixture on the some properties and corrosion of steel embedded in sodium sulfate solution of concrete10.1016/S0167-577X(03)00039-9 ↗
10. Baradan · 2002
11. Modelling of some properties of the crushed tile concretes exposed to elevated temperatures10.1016/j.conbuildmat.2010.11.071 ↗
12. Method to calculate the fire resistance of reinforced concrete columns with rectangular cross section
13. Compressive strength-color change relation in mortars at high temperature10.1016/j.cemconres.2004.01.015 ↗
14. Comparison of the strength and durability performance of normal and high strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
15. Karakurt C. Utilization of natural zeolite and volcanic tuffs with industrial wastes for cement production on performance of concrete. Eskişehir Osmangazi University, Institute of Natural Sciences, PhD thesis; 2008.
16. TS EN 1363-1, Fire resistance tests-Part 1. General requirements. Turkish Standards Institution; 2001.
17. TS EN 196-1, Methods of testing cements. Part 1. Determination of strength. Turkish Standards Institution; 2002.
18. ASTM C 618, Standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete. ASTM International; 1999.
19. High temperature behaviour of self-consolidating concrete microstructure and physicochemical properties10.1016/j.cemconres.2009.10.006 ↗
20. Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures10.1016/S0958-9465(98)00034-1 ↗