journal article·2009-08

Study of strengthening solutions for glued-laminated wood beams of maritime pine wood

Alfredo S. Ribeiro, Abílio M.P. de Jesus, António M. Lima, José L.C. Lousada

Publisher page

Abstract

Abstract The application of the concept of glued-laminated wood (glulam) to improve the mechanical properties of the solid wood of the maritime pine ( Pinus pinaster ) is the subject of this work. Two reinforced glued-laminated wood beams are proposed and assessed. The first is based on a concept of laminated wood composite with fiber glass; the second is based on the application of pultruded lamellas glued to the most stressed tensile region of the glued-laminated beams. In order to demonstrate the potential of the proposed strengthening solutions, a comparison between their mechanical behaviors and the mechanical behaviors of the conventional glued-laminated and solid beams are performed. Static load–deflection curves, an equivalent Young’s modulus, the ultimate strain and modulus of rupture are determined using 3-point quasi-static bending tests. In general, it is demonstrated the beneficial effect of the proposed strengthening solutions both in terms of resistance and ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Lignin and Wood Chemistry · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Quasi-static mechanical behaviour of a double-shear single dowel wood connection10.1016/j.conbuildmat.2008.01.005 ↗
2. Modern structural wood products10.1002/pse.79 ↗
3. Tsoumis · 1991
4. Fabela PIB, Fundo SP. Estudo Comparativo das Propriedades de Resistência Mecânica de Vigas de Madeira Maciça, Laminada e Reforçada das Espécies Pinus Pinaster e Picea Abies. UTAD, Departamento de Engenharias; 2004.
5. Ribeiro AS, Jesus AMP, Lima AMV, Ferreira AJM, Fernandes AA. Comparison of mechanical behaviour of solid, laminated and reinforced laminated beams of Pinus pinaster and Picea abies species. In: Pre-proceedings of the third international conference of the European society of wood mechanics, UTAD Vila Real; 2004. p. 301–9.
6. Fir and chestnut timber beams reinforced with GFRP pultruded elements10.1016/j.compositesb.2006.07.003 ↗
7. Experimental study of static and fatigue strengths of pultruded GFRP rods bonded into LVL and glulam10.1016/j.ijadhadh.2003.07.004 ↗
8. Fracture mechanics models applied to delayed failure of LVL beams10.1007/s00107-006-0128-6 ↗
9. Wood joints and laminated wood beams assembled by mechanically-welded wood dowels10.1163/156856107780684585 ↗
10. Wood variation – its causes and control10.1007/978-3-642-74069-5 ↗
11. Forest Products Laboratory. Wood handbook – wood as an engineering material. General technical report FPL-GTR-113. Madison (WI, USA): US Department of Agriculture, Forest Service, Forest Products, Laboratory; 1999.10.2737/FPL-GTR-113 ↗
12. Denig J, Wengert EM, Simpson WT. Drying hardwood lumber. General technical report FPL-GTR-118. Madison (WI, USA): Unite States Department of Agriculture, Forest Services, Forest Products, Laboratory; 2000.10.2737/FPL-GTR-118 ↗
13. ASTM. Standard methods of testing small clear specimens of timber (D143-83). Annual book of standards, vol. 04.09. Philadelphia (PA, USA): American Society for Testing and Materials; 1997.
14. Timoshenko SP, Gere JE. Mecânica dos Sólidos. Livros Técnicos e Cientifícos, vol. 1. Editora S. A. Rio de Janeiro; 1983.