journal article·2014-09

Dynamic multiaxial strength and failure criterion of dam concrete

Linlin Shi, Licheng Wang, Yupu Song, Lu Shen

Publisher page

Abstract

Dynamic multiaxial strength experiments on both dam and wet-screened concretes were carried out by using a large static and dynamic triaxial electro-hydraulic servo testing machine. The dynamic strength under uniaxial compression (C), uniaxial tension (T), biaxial compression–compression (C–C), biaxial compression–tension (C–T), triaxial compression–compression–tension (C–C–T) and triaxial compression–compression–compression (C–C–C) are presented in the paper. The influence of strain rate (ranging from 10−5/s to 10−2/s) and stress ratio on the failure modes and dynamic strength of dam and wet-screened concretes is analyzed. It is found that the failure modes of both dam and wet-screened concretes were mainly dependent on the stress ratio, but independent of the strain rate. The ultimate strengths of dam and wet-screened concretes are found to increase with the increase of strain rate. Particularly, the dynamic increasing factor (DIF) increases obviously when the tensile stress is included. It is noted that the maximum DIF existed in the triaxial C–C–T stress state and the minimum DIF corresponded to the triaxial C–C–C state. The octahedral normal and shear stresses are increased but the similar angle is kept constant with the increase of strain rate in the octahedral stress space. The dynamic failure criterion is developed after analyzing the effect of octahedral normal stress and similar angle on the dynamic strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geotechnical Engineering and Underground Structures · Rock Mechanics and Modeling · Dam Engineering and Safety

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Failure analysis of a cracked concrete gravity dam under earthquake10.1016/j.engfailanal.2013.05.024 ↗
2. Comparison of non-orthogonal smeared crack and plasticity models for dynamic analysis of concrete arch dams10.1016/S0045-7949(03)00083-X ↗
3. Dynamic analysis of arch dams including hydro dynamic effects
4. Effect of rate of application of loading on the compressive strength of concrete
5. Effect of straining rate on the compressive strength and elastic properties of concrete
6. Compressive behavior of concrete at high strain rates10.1007/BF02472016 ↗
7. Dynamic properties of plain concrete in direct tension10.1016/j.cemconres.2006.03.003 ↗
8. Review of strain rate effects for concrete in tension
9. Dynamic biaxial tensile-compressive strength and failure criterion of plain concrete10.1016/j.conbuildmat.2012.11.012 ↗
10. Study of the behavior of concrete under triaxial compression
11. Stress–strain relations of high-strength concrete under triaxial compression10.1061/(ASCE)0899-1561(2007)19:3(261) ↗
12. Triaxial behavior of concrete under high stresses: influence of the loading path on compaction and limit states10.1016/j.cemconres.2007.09.029 ↗
13. Dynamic properties of plain concrete in triaxial stress state
14. Dynamic properties of concrete materials with high rates of tri-axial compressive loads
15. Triaxial behavior of concrete under high stresses: influence of the loading path on compaction and limit states10.1016/j.cemconres.2007.09.029 ↗
16. Influence of strain rate and water content on mechanical behavior of dam concrete10.1016/j.conbuildmat.2012.06.046 ↗
17. Effect of aggregate type on mechanical behavior of dam concrete
18. Size influence of specimens and maximum aggregate on dam concrete: compressive strength10.1061/(ASCE)0899-1561(2009)21:8(349) ↗
19. Effect of aggregate size on the fracture and mechanical properties of a simple concrete10.1016/j.engfracmech.2008.02.011 ↗
20. Effect of aggregate and specimen size on fracture properties of dam concrete10.1061/(ASCE)0899-1561(1991)3:3(204) ↗
21. Biaxial compression behavior of different aggregate graded concrete10.1680/macr.2007.00144 ↗
22. Effect of coarse aggregate size and cement paste volume on concrete behavior under high triaxial compression loading10.1016/j.conbuildmat.2011.04.026 ↗
23. Behavior of dam concrete under biaxial compression–tension and triaxial compression–compression–tension10.1617/s11527-008-9381-y ↗
24. Experimental study of strength and deformation of plain concrete under biaxial compression after freezing and throwing cycles10.1016/j.cemconres.2006.05.018 ↗
25. Performance of plain concrete under biaxial tension–compression after freeze–thaw cycles10.1680/macr.2008.62.2.149 ↗
26. Triaxial strength and failure criterion of plain high-strength and high-performance concrete before and after high temperatures10.1016/j.cemconres.2009.08.024 ↗
27. Triaxial T–C–C behavior of air-entrained concrete after freeze–thaw cycles10.1016/j.coldregions.2013.01.004 ↗
28. Performance dependent failure criterion for normal and high-strength concretes
29. Simple single-surface failure criterion for concrete
30. Failure criteria for concrete under multiaxial load – a unified approach10.1061/(ASCE)0899-1561(2005)17:2(219) ↗
31. Song · 2002
32. Willam KL, Warnke E. Constitutive model for triaxial behavior of concrete. In: Proc int association for bridge and structure engineering. Rep. 19, Section 3, IABSE Zurich, Switzerland; 1975. p. 1–30.