Recycling of manganese gangue materials from waste-dumps in the Iberian Pyrite Belt – Application as filler for concrete production
Source abstract
Abstract
Abstract This study proposes an application of mine wastes from the exploitation of manganese ores deposits in the Iberian Pyrite Belt (SW Spain) in the civil engineering and construction sectors. The powdered waste rocks were used as filler in concrete, replacing part of the fine aggregate, in order to develop a new mixture. A comparative study on the performance of the concrete was carried out with control samples and with this new mixture. The experimental tests indicate the fitness of the new material for the purposed application, namely regarding resistance to compression. The new mix reached higher compressive resistance (56.44 MPa), comparatively with the conventional concrete (maximum at 41.03 MPa). The experimental tests demonstrate that: (i) gangue material give better properties to the concrete, (ii) it allows the replacement of concrete as filler in bituminous concretes, and (iii) it allows the reduction of the amount of cement used in “in situ” safety barriers in road construction. In addition, the recycle of the presently unwanted gangue will contribute to eliminate the environmental degradation promoted by the numerous waste-dumps in the Pyrite Belt. Consequently it results in lower environmental remediation costs of mine sites. Simultaneously, it would reduce the impact of new quarries, since it contributes to save stony raw materials. Moreover, extracting these valuable resources from the mine wastes stream will represent an industrial opportunity with financial returns, and, at the same time, improving environmental outcomes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Ferrero Blanco MD. Un Modelo de Minería Contemporánea: Huelva, del Colonialismo a la Mundialización. Universidad de Huelva, Huelva, 2000.
2. Reuse of coal mining wastes in civil engineering – part 1: properties of minestone10.1016/0956-053X(95)00004-J ↗
3. Malhotra V. Fly ash, silica fume, slag, and natural pozzolans in concrete. In: Proceedings of second international conference, vol. 1, Madrid, Spain, 1986.
4. Composition of high manganese Portland cement10.1016/0008-8846(77)90118-1 ↗
5. Frías M, García de Lomas M, Sánchez de Rojas MT, Menéndez I, Rincón JM, Rodríguez C. Viabilidad de una escoria de ferroaleaciones para la elaboración de hormigones. I Jornadas de Investigación en Construcción. ICC “Eduardo Torroja”. CSIC, Madrid, 2005. p. 529–536.
6. Properties of blast-furnace slags containing high amounts of manganese10.1016/S0008-8846(98)00096-9 ↗
7. UNE 146508 – Comisión permanente del Cemento. RC-08. Instrucción para la Recepción de Cementos. Centro de Publicaciones de la Secretaría General Técnica del Ministerio de Fomento, 2a ed., Madrid, 2009.
8. Wiltshire J. Marine manganese tailings concrete: advantages and drawbacks. In: Proceedings of Oceans ‘99, Marine Technology Society, Washington DC, 1999.
9. Wiltshire JC, Moore K. Manganese tailings concrete: antibiofouling properties and manganese toxicity. In: PACON ‘99 Proceedings, Pacon International, Honolulu, 2000. p. 400–409 .
10. Wiltshire J. The use of marine manganese tailings in industrial coatings applications. In: Proceeding of Oceans ‘97, Marine Technology Society, Washington, 1997. p. 1314–1319.10.1109/OCEANS.1997.624185 ↗
11. The Iberian type of volcano-sedimentary massive sulphide deposits10.1007/s001260050220 ↗
12. Geological constraints on massive sulphyde genesis in the Iberian Pyrite Belt10.1016/S0169-1368(96)00012-1 ↗
13. Pinedo y Vara J. Piritas de Huelva. Su Historia, Minería y Aprovechamiento. Summa, Madrid, 1963.
14. Gonzalo y Tarín J. Memorias de la Comisión del Mapa Geológico de España. Descripción Física, Geológica y Minera de la Provincia de Huelva. Imprenta y Fundición de Manuel Tello, Madrid, 1888.
15. Environment of formation and styles of volcanogenic massive sulfides The Iberian Pyrite Belt10.1016/j.oregeorev.2004.12.005 ↗
16. Comité Técnico AEN/CTN 146 Áridos. UNE 146508:1999 EX. Test for aggregates. Determination of the alkali–silica and alkali-silicate potential reactivity of aggregates. Accelerated mortar bar test. AENOR, 1999.
17. Comité Técnico AEN/CTN 146 Áridos. UNE 146901:2002. Aggregates. Designation. AENOR, 2002.
18. Comisión Permanente de Hormigón. EHE-08. Instrucción de Hormigón Estructural. Centro de Publicaciones de la Secretaría General Técnica del Ministerio de Fomento, 4a ed., Madrid, 2010.
19. Comité Técnico AEN/CTN 83 Hormigón. UNE-EN 12390-1:2001. Testing hardened concrete. Part 1: Shape, dimensions and other requirements for specimens and moulds. AENOR, 2001.
20. Comité Técnico AEN/CTN 83 Hormigón. UNE-EN 12390-2:2009. Testing hardened concrete. Part 2: Making and curing specimens for strength tests. AENOR, 2009.
21. Comité Técnico AEN/CTN 83 Hormigón. UNE-EN 12390-3:2009/AC 2011. Testing hardened concrete. Part 3: Compressive strength of test specimens. AENOR, 2011.
22. Comité Técnico AEN/CTN 83 Hormigón. UNE-EN 12390-4:2001. Testing hardened concrete. Part 4: Compressive strength. Specification for testing machines. AENOR, 2001.
23. Salguero F. Sobre las Curvas Tensión-Deformación de Hormigones y Otros Materiales Sometidos a Ensayos de Tensión Uniaxial. Tesis Doctoral. Universidad de Huelva, 2012.
24. Wiltshire J. Use of marine mineral tailings for aggregate and agricultural applications. In: sProceedings of the International Offshore and Polar Engineering Conference, May 25–30, Honolulu, Hawaii, ISOPE, Golden, Colorado, 1997. p. 468–474.
25. Loudat TA, Wiltshire J. Industrial application of waste manganese: initial testing and economic evaluation. In: Proceedings of PACON ‘97, PACON International, Honolulu, 1997. p. 48–56.
26. Manganese tailings: useful properties suggest a potential for gas absorbent and ceramic materials10.1080/10641199809379972 ↗
27. Composition and useful properties of tailings of marine manganese nodules and crusts10.1080/10641190590959911 ↗
28. Bai Z, Wen Z, Wiltshire JC. Marine mineral tailings use in anticorrosive coatings. In: Proceedings of the OCEANS 2008 MTS/IEEE, QUEBEC Conference, Quebec, Canada, 2008.10.1109/OCEANS.2008.5151930 ↗
29. Cagiao J, Gómez B, Doménech JL, Gutiérrez S, Gutiérrez H, Martínez F, González MB. Huella ecológica del cemento: cálculo de la huella ecológica de una industria cementera y propuesta de medidas de ingeniería sostenible destinadas a su reducción. Universidad da Coruña, ETSICCP da Coruña, Fundación de la Ingeniería Civil de la Coruña, Laboratorio de Ingeniería Sostenible. Coruña, 2010.
30. Erdogan S, Fowler D. – Determination of aggregate shape properties using X-ray tomography methods and the effect of shape on concrete rheology. Research Report ICAR 106-1. Aggregates Foundation for Technology, Research and Education, 2005. p. 302.
31. The challenges of reusing mining and mineral-processing wastes10.1126/science.1224757 ↗
32. Recycling, reuse and rehabilitation of mine wastes10.2113/gselements.7.6.405 ↗