Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading
Source abstract
Abstract
Abstract Two finite element models are proposed to simulate the behavior of eccentrically loaded FRP-wrapped RC columns. Comparison between numerical and experimental results indicates that perfect bond can be used to simulate the interfaces between concrete and FRP as well as interface elements. The developing curves of lateral displacement are similar to sine half-wave curves. Twenty specimens were tested based on the finite element model using perfect bond between concrete and FRP composites. The result shows the maximum concrete compressive stress does not change with various parameters and the maximum concrete compressive strain is inversely proportional to eccentricity-to-section height ratio and length-to-section height ratio. An analysis-oriented model and a design-oriented model are proposed to predict the strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Axial testing of rectangular column models confined with composites10.1061/(ASCE)1090-0268(2000)4:3(129) ↗
2. Design-oriented stress–strain model for FRP-confined concrete in rectangular columns10.1177/0731684403035429 ↗
3. Shape and “gap” effect on the behavior of variably confined concrete10.1016/S0008-8846(02)01085-2 ↗
4. FRP-confined concrete members: axial compression experiments and plasticity modeling10.1016/j.engstruct.2006.08.006 ↗
5. Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates10.1016/j.compositesb.2006.06.019 ↗
6. Effect of corner radius on the performance of CFRP-confined square concrete columns: Test10.1016/j.engstruct.2007.04.016 ↗
7. Comparison of strength, ultimate strain models of concrete columns confined with FRP
8. Comparative study of eccentrically loaded FRP wrapped columns10.1016/j.compstruct.2005.03.013 ↗
9. Behavior of eccentric loading of FRP confined fiber steel reinforced concrete columns10.1016/j.conbuildmat.2008.05.024 ↗
10. Behavior of FRP jacketed concrete columns under eccentric loading10.1061/(ASCE)1090-0268(2001)5:3(146) ↗
11. Performance of fiber-reinforced polymer-wrapped reinforced concrete column under combined axial-flexural loading
12. Behavior of concrete columns strengthened by CFRP sheets under eccentric compression
13. Strengthening of eccentrically loaded reinforced concrete columns with fiber-reinforced polymer wrapping system: experimental investigation and analytical modeling10.1061/(ASCE)1090-0268(2009)13:1(13) ↗
14. ANSYS Inc. ANSYS user’s manual, revision 10.0.
15. A numerical approach to the complete stress–strain curve of concrete10.1016/0008-8846(73)90096-3 ↗