journal article·2009-02

Effect of the environment temperature on the chloride diffusion through CEM-I and CEM-V mortars: An experimental study

T.S. Nguyen, S. Lorente, M. Carcasses

Publisher page

Abstract

Abstract This paper documents the influence of the temperature level (5, 21 and 35 °C) on the chloride penetration through cementitious materials. Mortars based on CEM-I and CEM-V type cements are tested. Results on chloride binding, chloride diffusion coefficients together with total chloride concentration profiles after 6 months of immersion are presented. It is shown that the change of total chloride concentration profiles with the temperature is due to the change in chloride diffusion coefficients.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Electrokinetic Soil Remediation Techniques · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Diffusion of chloride ion in hardened cement pastes10.1016/0008-8846(81)90111-3 ↗
2. Influence of temperature, cement type and level of concrete consolidation on chloride ingress in conventional and high-strength concretes10.1016/S0950-0618(97)00004-4 ↗
3. Chloride ingress profiles measured by electron probe micro analysis10.1016/S0008-8846(96)00158-5 ↗
4. Sorption of chloride on hydrated cements and C3S pastes
5. Larsen CK. Effect of surrounding environment and concrete composition. PhD thesis. Norway: The Norwegian University of Science and Technology; 1998.
6. Lindvall A. Environment actions on concrete exposed in marine and road environment and its response. PhD thesis. Sweden: Chalmers University of Technology; 2003.
7. Chloride diffusion through mortar, influence of the temperature level10.1680/adcr.2007.19.1.17 ↗
8. Modeling the effect of temperature on ionic transport in cementitious materials10.1016/j.cemconres.2006.11.008 ↗
9. AFGC-AFREM. Méthodes recommandées pour la mesure des grandeurs associées à la durabilité, Toulouse, France; 1997.
10. Chloride binding capacity and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
11. A new way for determining the chloride diffusion coefficient in concrete from steady state migration test10.1016/S0008-8846(99)00232-X ↗
12. Predictive model for chloride penetration through concrete10.1680/macr.2005.57.9.511 ↗
13. A method of calculation of the chemical composition of the concrete pore solution10.1016/0008-8846(93)90176-A ↗
14. Rubinstein · 1990
15. Migration versus diffusion through porous media: time dependent scale-analysis10.1615/JPorMedia.v9.i7.30 ↗
16. Constructal view of electrokinetic transfer through porous media10.1088/0022-3727/40/9/041 ↗
17. The single-valued diffusion coefficient for ionic diffusion through porous media10.1063/1.2426375 ↗
18. NORDTEST. Concrete, hardened: accelerated chloride penetration. NT BUILD 443; 1995.
19. Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry. A comparative study between oven-, vacuum- and freeze-drying10.1016/S0008-8846(01)00594-4 ↗
20. Scale analysis of electrodiffusion through porous media10.1615/JPorMedia.v9.i4.30 ↗