journal article·2012-06

Relationships between compressive strength of cement–slag mortars under air and water curing regimes

Fathollah Sajedi, Hashim Abdul Razak, Hilmi Bin Mahmud, Payam Shafigh

Publisher page

Abstract

Abstract In this investigation 12 mortar mixes including three groups were prepared using binder contents 380 and 500 kg/m 3 . All the specimens were cured after casting and demoulding in curing regimes, i.e. at room temperature (ac) and in water (wc). The highest strength was obtained for cement–slag mortars 380-wc at later ages as 80 MPa. For all groups of mortars, there could rarely be strength loss at later ages. It was observed that in duration of 3–7 days, wc is the optimum for all groups of mortars with exception of cement mortar 500 and slag mortar 500. In duration of 28–90 days, wc is also the optimum for three groups of mortars with exception of cement mortar 500. It was revealed that an exponential relationship exists between the strengths obtained in air and water curing conditions for each group of mortar, i.e. with and without using ground granulated blast furnace slag. It was proved that higher strengths could be obtained using lower binders’ contents for cement and cement–slag mortars provided the specimens were cured in water. This is a new finding having importance from economic and environmental viewpoints; meaning that for producing higher strengths it is not a necessity to use more binders. It was found that increase in level of cement and slag makes the mortars more sensitive to air curing conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
2. Mortar Industry Association. The use of ground granulated blast furnace slag and fly ash in mortar. Data Sheet; 2008. p. 16.
3. Moinul Islam Md, Saiful Islam Md, Aftabur Rahman Md, Amrita Das, strength behavior of mortar using slag as partial replacement of cement. MIST Journal. doi: http://dx.doi.org/10.3329/mist.v3i0.8053.10.3329/mist.v3i0.8053 ↗
4. Properties of carbonated blast furnace slag mortars after Na2FPO3 treatment10.2306/scienceasia1513-1874.2010.36.223 ↗
5. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
6. Effect of curing conditions on the mortars with and without GGBFS10.1016/j.conbuildmat.2006.08.013 ↗
7. Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
8. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions10.1016/S0008-8846(01)00587-7 ↗
9. Blast furnace slag processing to blended cements
10. Ekaputri JJ, Ishida T, Maekawa K. Autogeneous shrinkage of mortars made with different types of sag cement. JCI Annual Convention, Saitama, Japan; 2010.
11. Interrelation between fine grinding and mechanical activation10.1016/0301-7516(95)00028-3 ↗
12. Report of ACI Committee 233. Slag cement in concrete and mortar, ACI 233R-03. American Concrete Institute, Farmington Hills, Mich; 2003.
13. Bijen · 1996
14. SFIC. French cement industry union: activity reports. Tech rep, syndicat francais de industrie cimentiaire; 1973–2007.
15. The microstructure and mechanical properties of blended cements hydrated at various temperatures10.1016/S0008-8846(01)00471-9 ↗
16. Hydration, structure and properties of blast furnace slag cements, mortars and concrete
17. Sajedi F. Influence of activation methods on strength of ordinary Portland cement–slag mortars. University of Malaya, Kuala Lumpur, Malaysia; 201110.1016/j.conbuildmat.2010.06.060 ↗
18. Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume10.1016/0958-9465(95)00005-W ↗
19. Self-curing concrete: water retention, hydration and moisture transport10.1016/j.conbuildmat.2006.02.007 ↗
20. ACI 308R · 2001
21. Performance of concrete under different curing conditions10.1016/S0008-8846(96)85023-X ↗
22. Haque · ACI Mater J · 1989
23. Influence of different curing conditions on the physical and mechanical properties of concretes with admixtures of silica fume and blast furnace slag10.1016/S0167-577X(03)00362-8 ↗
24. Shape and size effects on the compressive strength of high-strength concrete10.1016/j.cemconres.2007.09.020 ↗
25. Mindess · 2003
26. Investigation of hydraulic activity of ground granulated blast furnace slag in concrete10.1016/S0008-8846(03)00062-0 ↗
27. Strength development of cement mortar and concrete incorporating GGBFS
28. The effect of chemical activators on early strength of ordinary Portland cement–slag mortars10.1016/j.conbuildmat.2010.04.006 ↗
29. ASTM C109-99. Standard test method for compressive strength of hydraulic cement mortars [Using 2-in. or [50-mm] Cube Specimens]; 2001.
30. Effect of temperature and aging on the mechanical properties of concrete. Part II: Prediction model10.1016/S0008-8846(02)00745-7 ↗
31. ASTM C989. Standard specification for slag cement for use in concrete and mortars; 2005.
32. BSI · 1985
33. Neville · 1993
34. Neville · 2008
35. ASTM C494. Standard specification for chemical admixtures for concrete; 2005.
36. ASTM C230/C230M-08. Standard specifications for flow table for use in tests of hydraulic cement.
37. BSI · 1881
38. Optimum level of replacement slag in OPC–Slag mortars
39. Thermal activation of ordinary Portland cement–slag mortars10.1016/j.matdes.2010.04.011 ↗
40. The effect of heat treatment on the compressive strength of cement–slag mortars10.1016/j.matdes.2011.04.038 ↗
41. Postacioglu B. Concrete. vol. 1. Istanbul: Teknik Kitaplar; 1987.
42. Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag10.1016/j.buildenv.2006.07.027 ↗
43. The influence of initial water curing on the strength development of ordinary Portland and pozzolanic cement concretes10.1016/S0008-8846(03)00185-6 ↗
44. Influence of dry and wet curing conditions on compressive strength of silica fume concretes10.1016/j.buildenv.2004.12.005 ↗