journal article·2014-05

In-plane stiffening techniques with nail plates or CFRP strips for timber floors in historical masonry buildings

Natalino Gattesco, Lorenzo Macorini

Publisher page

Abstract

The paper investigates two strengthening techniques for timber floors in historical masonry buildings. These alternative solutions may be used to enhance in-plane stiffness and strength of existing wooden floors. According to the first technique, nail plates are utilised to connect adjacent timber boards, while diagonal carbon fibre (CFRP) strips glued to timber boarding are considered in the second solution. Four full scale stiffened floor samples, which were designed using specific relationships to calculate in-plane stiffness and resistance, were tested under in-plane cyclic loading. Test results showed an enhanced stiffness for strengthened floors which is 40–50 times higher than that of the original wooden floor and close to the values calculated employing the proposed design expressions. To study how the use of the analysed stiffening solutions affects the seismic performance of masonry buildings, nonlinear static analyses were carried out on a typical historical masonry building with wooded floors under earthquake loading. In particular, the response of the building with original floors was compared with that of the structure with strengthened floors. The numerical results confirmed that the stiffness of the reinforced floors is adequate to guarantee satisfactory structural integrity for the whole building as damage was found to be mainly located in shear walls, while walls perpendicular to earthquake loading remained almost undamaged.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Wood Treatment and Properties · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. State-of-the-art report on seismic performance of unreinforced masonry buildings10.1061/(ASCE)0733-9445(1994)120:1(230) ↗
2. Earthquake-resistant design of masonry structures
3. Seismic behavior of wood diaphragms in pre-1950s unreinforced masonry buildings10.1061/(ASCE)0733-9445(2004)130:12(2040) ↗
4. Piazza M, Baldessari C, Tomasi R. The role in-plane floor stiffness in the seismic behaviour of traditional buildings. In: Proceedings of the 14th world conference on earthquake engineering. Beijing, China: 2008.
5. Experimental evaluation of the in-plane stiffness of timber diaphragms10.1193/1.4000088 ↗
6. In-plane orthotropic behavior of timber floor diaphragms in unreinforced masonry buildings10.1061/(ASCE)ST.1943-541X.0000819 ↗
7. Nonlinear in-plane deformation mechanics of timber floor diaphragms in unreinforced masonry buildings
8. Una tecnica di recupero statico dei solai in legno
9. L’organizzazione degli impalcati per gli edifici storici
10. Modena C, Valluzzi MR, Garbin E, da Porto F. A strengthening technique for timber floors using traditional materials. In: Proceedings of the fourth international seminar on structural analysis of historical constructions. Padova, Italy, 10–13 November, 2004. p. 911–21.
11. Gattesco N, Macorini L. High reversibility technique for in-plane stiffening of wooden floors. In: Ayala D, Fodde B editors. Proceedings SAHC bath 2008 structural analysis of historic construction. Berlin: Springer CRC Press; 2008.10.1201/9781439828229.ch118 ↗
12. Valluzzi MR, Garbin E, Dalla Benetta M, Modena C. In-plane strengthening of timber floors for the seismic improvement of masonry buildings. In: Proceedings of world conference on timber engineering WCTE; 2010.
13. Roca P. The Study and Restoration of Historical Structures: From Principles to Practice. In: Lourenço PB, Roca P, Modena C, Agrawal S editors. Proc. 5th Int. Conference, structural analysis of historical constructions SAHC 2006 New Delhi 2006. 2006; p. 9-24.
14. The 2002 Molise, Italy
15. Damage assessment of churches after L’Aquila earthquake (2009)10.1007/s10518-011-9307-x ↗
16. G.U. No. 47. 26/02/2009 (suppl. Ord. No. 27). Circular 2/02/2009. No. 617. Instructions for the application of the new Technical Code for the design of constructions. issued by D.M. 14/01/2008. [in Italian].
17. Experimental tests on the shear behavior of dowels connecting concrete slabs to stone masonry walls10.1007/BF02472951 ↗
18. Gattesco N, Macorini L. Strengthening and stiffening ancient wooden floors with flat steel profiles. In: Lourenço PB, Roca P, Modena C, Agrawal S editors. Proc 5th int conference, structural analysis of historical constructions SAHC 2006, New Delhi; 2006; p. 405–12.
19. CNRDT 201/2005. Guide for the design and construction of externally bonded FRP Systems for strengthening existing timber structures; 2005 [in Italian].
20. EN 1995-1-1:2004, Eurocode 5. Design of timber structures. Part 1–1: General rules and rules for buildings. Bruxelles: CEN European Committee for Standardization; 2004.
21. EN 1998–1:2004, Eurocode 8. Design of structures for earthquake loading. Part 1: General rules, seismic actions and rules for buildings. Bruxelles: CEN European Committee for Standardization; 2004.
22. EN 12512:2001 · 2001
23. ABAQUS · 2010
24. Lourenço PB. Computation strategy for masonry structures. Dissertation Thesis. Delft (The Netherlands): University of Technology; 1996.
25. Kacharov · 1990
26. Plastic-damage model for cyclic loading of concrete structures
27. Plastic-damage model for concrete