Effect of styrene–butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive
Source abstract
Abstract
Abstract This study investigated the effects of the type and amount of Portland cement and carboxylated styrene–butadiene emulsion (Tylac® 4190) on the short-term performance of a road base layer via a laboratory evaluation of stabilized soil-aggregate mixtures. Cylindrical specimens stabilized with Portland cement (0–6%), Tylac® 4190 (5–10%), and a mixture of both these additives were molded, cured for 7, 28, and 60 days, and then subjected to different stress sequences to study the unconfined compressive strength, indirect tensile strength, and indirect tensile resilient modulus. The long-term performance (durability) of stabilized soil-aggregate specimens was investigated by conducting wetting and drying (WD) cycling tests on 7-day-cured soil-aggregate specimens stabilized with cement and Tylac® 4190. The results revealed that the additives improved the strength of the specimens, which has been found to be an important quality indicator of road base mechanical properties. Results of tests conducted to assess the specimens’ resistance to WD cycling showed that the addition of a 4% Portland cement–8% Tylac® 4190 mixture resulted in reductions of 86.99% in both water absorption and permeability, volume changes of 88.55%, and weight changes of 92.84% relative to a sample with only 4% cement after 12 WD cycles. This paper also presents the findings of a correlation study conducted for determining the influences of affective variables using nonlinear regression analysis to establish significant prediction models for strength based on mixture parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical Engineering and Soil Stabilization · Geotechnical and construction materials studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Investigation of the strength development in cement-stabilised soils of volcanic origin10.1016/j.conbuildmat.2011.08.054 ↗
2. Stabilization of a Saudi calcareous marl soil10.1016/j.conbuildmat.2010.04.019 ↗
3. Stabilization of residual soil with rice husk ash and cement10.1016/j.conbuildmat.2004.08.001 ↗
4. Analysis of strength development in cement-stabilized silty clay from microstructural considerations10.1016/j.conbuildmat.2010.03.011 ↗
5. Usage of cement kiln dust in cement products – research review and preliminary investigations10.1016/j.conbuildmat.2007.09.005 ↗
6. Effect of cement treatment on geotechnical properties of some Washington State soils10.1016/j.enggeo.2008.09.003 ↗
7. Cement concrete and concrete–polymer composites: two merging worlds10.1016/j.cemconcomp.2005.05.004 ↗
8. Polymers in concrete: a vision for the 21st century10.1016/S0958-9465(99)00032-3 ↗
9. Principle of latex modification and some typical properties of latex-modified mortars and concretes adhesion; binders (materials); bond (paste to aggregate); carbonation; chlorides; curing; diffusion
10. Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar10.1016/j.conbuildmat.2008.11.011 ↗
11. Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms10.1016/j.conbuildmat.2013.05.048 ↗
12. Durability of styrene–butadiene latex modified concrete10.1016/S0008-8846(97)00055-0 ↗
13. Chemical and microbiological tests to simulate sulfuric acid corrosion of polymer-modified concrete10.1016/S0008-8846(01)00565-8 ↗
14. Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes10.1016/j.conbuildmat.2009.08.001 ↗
15. Properties of polymer modified steel fiber-reinforced cement concretes10.1016/j.conbuildmat.2009.12.020 ↗
16. Formation of hydrates of calcium aluminates in cement pastes with different dosages of SBR powder10.1016/j.conbuildmat.2010.07.013 ↗
17. SBR latex modified mortar rheology and mechanical behaviour10.1016/j.cemconres.2003.09.006 ↗
18. Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars10.1016/j.cemconres.2004.07.012 ↗
19. Durability of polymer-modified lightweight aggregate concrete10.1016/S0958-9465(03)00022-2 ↗
20. Polymer-based materials for repair and improved durability: Japanese experience10.1016/0950-0618(95)00063-1 ↗
21. Garber · 2011
22. Bitumen-cement stabilized layer in pavement construction using indirect tensile strength (ITS) method10.19026/rjaset.5.4251 ↗
23. Mechanistic design of asphalt pavements and verification using the heavy vehicle simulator
24. Xuan · 2009
25. Bell · 2002
26. Comparing the conventional soil stabilization methods to the consolid system used as an alternative admixture matter in Isparta Darıdere material10.1016/j.conbuildmat.2009.01.002 ↗
27. Application of cement-treated recycled materials in the construction of a section of road in Malaga, Spain10.1016/j.conbuildmat.2013.02.034 ↗
28. NITRR. Cementitious Stabilizers in Road Construction: National Institute for Transport and Road Research, South Africa. Highway Materials Committee, Committee of State Road Authorities; 1986.
29. PCA · 1992
30. State-of-the-art report on soil-cement
31. ASTM. American Society for Testing and Materials (ASTM). West Conshohocken (PA), USA; 2004.
32. ACI. State-of-the-art report on soil cement. Detroit, USA: American Concrete Institute; 1997.
33. ARMY. Soil stabilization for pavements. TM 5-822-14. Washington, DC: Department of the Army, the Navy and the Air Force; 1994.
34. Jones D, Jones D. Guidelines for the Stabilization of Subgrade Soils in California. California: UCD-ITS-RR-10-38, Institute of Transportation Studies, University of California, Davis; 2010.
35. Effects of non-plastic fines on minimum and maximum void ratios of sand10.1520/GTJ11373J ↗
36. Mechanical properties of cement-treated aggregate material – a review10.1016/j.matdes.2011.04.055 ↗
37. Compressive and indirect tensile strengths of cement-treated mix granulates with recycled masonry and concrete aggregates10.1061/(ASCE)MT.1943-5533.0000401 ↗
38. Stabilization mechanisms of nontraditional additives10.3141/1989-49 ↗
39. Molenaar A. Design of flexible pavement, lecture note CT 4860 structural pavement design. The Netherlands: Delft University of Technology; 2007.
40. The potentials of Portland cement and bitumen emulsion mixture on soil stabilization in road base construction
41. Sherwood · 1993
42. California Bearing Ratio improvement and freeze–thaw performance of fine-grained soils treated with geofiber and synthetic fluid10.1016/j.coldregions.2010.05.006 ↗
43. Maher A, Szalaj WM, Bennert T. Evaluation of Poisson’s Ratio for Use in the Mechanistic Empirical Pavement Design Guide (MEPDG). Division of Research and Technology, Rutgers University. Center for Advanced Infrastructure & Transportation, United States. Federal Highway Administration: Department of Transportation; 2008.
44. Estimation of the compressive strength and modulus of elasticity of cement-treated aggregate base materials10.3141/1837-04 ↗
45. Terrel RL, Epps JA, Barenberg E, Mitchell J, Thompson M. Soil stabilization in pavement structures, a user’s manual, Pavement design and construction considerations, vol. 1. Washington DC: Federal Highway Administration, Department of Transportation; 1979.
46. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
47. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗