journal article·2015-10

The potential of ground clay brick to mitigate Alkali–Silica Reaction in mortar prepared with highly reactive aggregate

Kaveh Afshinnia, Amir Poursaee

Publisher page

Abstract

Abstract The objective of this work was to study the effect of ground clay brick on mitigating the Alkali Silica Reaction (ASR) in mortar bars prepared with highly reactive aggregates. To evaluate the potential of ground crushed clay brick to mitigate ASR distress in mortar, mortar bars and mortar cubes were cast with combination of different dosages of ground clay brick (partial replacement of portland cement). The pozzolanic reactivity of ground clay brick was also evaluated using strength activity index test. In addition, the Scanning Electron Microscopy (SEM) and the Energy-Dispersive X-ray Spectroscopy (EDS) were conducted to evaluate the microstructure and location of the ASR gel and its chemical composition. The results from this study indicated satisfactory level of pozzolanic reactivity when cement was partially replacement by the ground clay brick. Also, it was found that replacing 25% of cement with ground clay brick (by weight) could significantly decrease the ASR expansion by 67% at the age of 14 days. However, this study suggested that the compressive strength values of the specimens containing higher dosages of ground crushed brick (i.e. 50% replacement level) were significantly lower than that of the control specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Field studies of fly ash concrete structures containing reactive aggregates10.1680/macr.1996.48.177.265 ↗
2. The effect of fly ash on concrete alkali-aggregate reaction10.1520/CCA10212J ↗
3. Decoupling the effects of chemical composition and fineness of fly ash in mitigating alkali–silica reaction10.1016/j.cemconcomp.2013.06.009 ↗
4. Effect of blended fly ashes in mitigating alkali–silica reaction10.3141/2240-11 ↗
5. The effect of fly ash composition on the expansion of concrete due to alkali–silica reaction10.1016/S0008-8846(00)00283-0 ↗
6. The ASR expansion of concrete prisms made from cements partially replaced by ground granulated blast furnace slag10.1016/0950-0618(93)90038-E ↗
7. A study of the influence of slag alkali level on the alkali–silica reactivity of slag concrete10.1016/j.conbuildmat.2005.02.016 ↗
8. Mitigation of the detrimental effects of ASR in cement based composites by combination of steel micro-fibers and ground-granulated blast-furnace slag10.1061/(ASCE)MT.1943-5533.0001005 ↗
9. Effect of metakaolin on Alkali–Silica Reaction (ASR) in concrete manufactured with reactive aggregate
10. The influence of metakaolin and silica fume on the chemistry of alkali–silica reaction products10.1016/S0958-9465(00)00096-2 ↗
11. The effect of metakaolin on alkali–silica reaction in concrete10.1016/S0008-8846(99)00261-6 ↗
12. Transport properties in metakaolin blended concrete10.1016/j.conbuildmat.2010.04.035 ↗
13. Effects of silica fume on alkali–silica expansion in mortar specimens10.1016/0008-8846(92)90131-E ↗
14. The effect of the silica content of silica fume on its ability to control alkali–silica reaction10.1016/S0008-8846(03)00058-9 ↗
15. Influence of fineness of ground recycled glass on mitigation of alkali–silica reaction in mortars10.1016/j.conbuildmat.2015.02.041 ↗
16. Comparative performance of ground clay brick in mitigation of alkali–silica reaction10.1061/(ASCE)0899-1561(2007)19:12(1070) ↗
17. Utilizing waste recycled glass as sand/cement replacement in concrete10.1061/(ASCE)0899-1561(2009)21:12(709) ↗
18. Value-added utilization of waste glass in concrete10.1016/S0008-8846(03)00251-5 ↗
19. Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash10.1016/j.cemconcomp.2008.02.001 ↗
20. How does fly ash mitigate alkali–silica reaction (ASR) in accelerated mortar bar test (ASTM C1567)?10.1016/j.cemconcomp.2012.11.004 ↗
21. Influence of supplementary cementitious materials on engineering properties of high strength concrete10.1016/j.conbuildmat.2010.12.013 ↗
22. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
23. Alkali sorption by CSH and CASH gels: Part II. Role of alumina10.1016/S0008-8846(02)00753-6 ↗
24. Pozzolanic properties of a variety of European clay bricks10.1080/096132197370435 ↗
25. Use of waste brick as a partial replacement of cement in mortar10.1016/j.wasman.2009.03.026 ↗
26. Waste brick’s potential for use as a pozzolan in blended portland cement
27. Pore size distribution and compressive strength of waste clay brick mortar10.1016/S0958-9465(00)00070-6 ↗
28. Performance evaluation of cement mortars modified with metakaolin or ground brick10.1016/j.conbuildmat.2008.08.027 ↗
29. Use of ground clay brick as a pozzolanic material to reduce the alkali–silica reaction10.1016/S0008-8846(03)00101-7 ↗
30. Alkali reactivity of crushed clay brick aggregate10.1016/j.conbuildmat.2013.11.014 ↗
31. Effects of crushed clay brick aggregate on mortar durability10.1016/j.conbuildmat.2008.09.006 ↗
32. ASTM, C1260 · 2014
33. ASTM, C33 · 2013
34. ASTM, C109 · 2013
35. ASTM, C311 · 2013
36. Microstructural studies of alkali–silica reaction in fly ash concrete immersed in alkaline solutions10.1016/S1065-7355(97)00030-8 ↗
37. Alkali silica and pozzolanic reactions in concrete. Part 1: Interpretation of published results and an hypothesis concerning the mechanism10.1016/0008-8846(87)90068-8 ↗