journal article·2015-12

Laboratory moisture susceptibility evaluation of WMA under possible field conditions

Mohd Rosli Mohd Hasan, Zhanping You, David Porter, Shu Wei Goh

Publisher page

Abstract

Abstract One of the major concerns with WMA is degradation due to the presence of moisture during production. In the field, moisture in the aggregates may not be completely expelled due to a lower production temperature which increases the potential for moisture damage, including stripping. The objectives of this paper are: (1) to investigate the impact of hydrated lime on the moisture resistance of WMA mixtures prepared using saturated surface dried (SSD) moist aggregates; (2) to examine the effects of multiple freeze–thaw cycles on the moisture susceptibility of WMA mixtures. Testing samples were prepared in the laboratory with the materials from a local asphalt plant in Michigan according to the Superpave mix design. The control samples (HMA) were mixed and compacted at 165 °C and 155 °C, respectively. The WMA samples were prepared using different additives, which were Advera, Sasobit, Cecabase RT, and water as a foaming agent. For the moisture susceptibility evaluation, the mixtures were prepared using SSD aggregates and the WMA mixtures were both mixed and compacted at a similar temperature, 130 °C. Hydrated lime was added as an anti-stripping agent to determine whether or not it can improve the moisture susceptibility of the HMA and WMA prepared using SSD moist aggregate. The samples for the multiple freeze–thaw study were prepared according to a similar mix design at numerous temperatures (100 °C, 115 °C and 130 °C) and different percentages of WMA additives based on the specific ranges recommended by the manufacturer of each WMA technology. Each additive was added to the asphalt binder prior to mixing with aggregate based on the designated percentage. Based on the results, the presence of hydrated lime in the WMA has resulted in the TSR values passing the minimum requirement of 0.80. This indicates that by adding hydrated lime, the moisture susceptibility of the WMA can be improved. The WMA samples that were tested under multiple freeze–thaw cycles do not perform as well as the HMA samples. Different additives perform better at different quantities in the mixture, as well as at different temperatures. Lower mixing and compaction temperatures negatively affect the TSR after repeated freeze–thaw conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · High voltage insulation and dielectric phenomena · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Moisture susceptibility of asphalt mixtures, Part 1: mechanisms10.1080/10298430701792128 ↗
2. Evaluation of moisture damage in hot mix asphalt using simple performance and superpave indirect tensile tests10.1016/j.conbuildmat.2007.07.014 ↗
3. Moisture susceptibility of asphalt mixture10.1080/10298430701792128 ↗
4. Asphalt-Institute, Best Practice to Minimize Sensitivity in Asphalt Mixture, 2007.
5. Permeability and bleeding of asphalt concrete using mixture theory10.1016/S0020-7225(00)00064-1 ↗
6. A procedure to quantify organic antistrip additives in asphalt binders and mixes
7. Non-destructive measurement of moisture transport in asphalt mixtures
8. D.N. Little, D. Jones, Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements, in: National seminar on moisture sensitivity of asphalt pavements, San Diego California, 2003.
9. A synthesis of theories and mechanisms of bitumen-aggregate adhesion including recent advances in quantifying the effects of water (with discussion)
10. A. Copeland, J. Youtcheff, N. Kringos, A. Scarpas, S. Mahadevan, Determination of bond strength as a function of moisture content at the aggregate-mastic interface, in: 10th International Conference On Asphalt Pavements-August 12 to 17, 2006, Quebec City, Canada, 2006.
11. Investigation of moisture dissipation in foam-based warm mix asphalt using synchrotron-based X-ray microtomography10.1061/(ASCE)MT.1943-5533.0000433 ↗
12. S. Diefenderfer, A. Hearon, Laboratory evaluation of a warm asphalt technology for use in Virginia, 2008.
13. B.D. Prowell, G.C. Hurley, Warm Mix Asphalt: Best Practice, 2007, National Asphalt Pavement Association.
14. D. Hunt, Overcoming Operating Challenges with Warm Mix Asphalt, 2007.
15. Effects of mean annual temperature and mean annual precipitation on the performance of flexible pavement using ME design
16. Limits on adhesive bond energy for improved resistance of hot-mix asphalt to moisture damage10.1177/0361198106197000101 ↗
17. A review of state of the art on stripping phenomenon in asphalt concrete10.1016/j.conbuildmat.2012.08.033 ↗
18. Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime10.1016/j.conbuildmat.2008.12.001 ↗
19. Hydrated lime effect on moisture susceptibility of warm mix asphalt10.1016/j.conbuildmat.2012.04.073 ↗
20. Rheological characteristics of nano-sized hydrated lime-modified foamed warm mix asphalt
21. Evaluation of foam-based warm mix asphalt modified with nano-sized hydrated lime using multiple creep and recovery tests
22. A. Diab, Z. You, Rheological properties of short-term aged foamed asphalt modified with nano hydrated lime, International Conference on Materials, Architecture and Engineering Technology (ICMAET), 2013, pp. 19–20.10.1061/9780784413623.101 ↗
23. Effects of regular-sized and nanosized hydrated lime on binder rheology and surface free energy of adhesion of foamed warm mix asphalt
24. Rheological evaluation of foamed WMA modified with nano hydrated lime10.1016/j.sbspro.2013.08.318 ↗
25. Using modified creep and recovery tests to evaluate the foam-based warm mix asphalt contained nano hydrated lime10.4028/www.scientific.net/AMR.646.90 ↗
26. Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt10.1016/j.conbuildmat.2013.05.079 ↗
27. D.N. Little, J.A. Epps, The Benefits of Hydrated Lime in Hot Mix Asphalt, 2001.
28. Use of accelerated loading equipment for determination of long term moisture susceptibility of hot mix asphalt10.1080/10298430500158984 ↗
29. Moisture damage and fatigue cracking of foamed warm mix asphalt using a simple laboratory setup
30. Z. You, S.W. Goh, Q. Dai, Unit–C, and C.P. T, Laboratory evaluation of warm mix asphalt, Report No. RC-1556, 2011.
31. R. West, C. Rodezno, G. Julian, B. Prowell, Engineering properties and field performance of warm mix asphalt technologies, NCHRP 9-47 Final Rep, 2014.
32. G.C. Hurley, B.D. Prowell, A.N. Kvasnak, Michigan field trial of warm mix asphalt technologies: construction summary, National Center for Asphalt Technology, Report No. 09-10X, 2009.
33. Michigan Department of Transportation (MDOT), Special Provision for Superpave HMA Mixtures, 2003, Lansing, MI, p. 6.
34. D.N. Little, J.A. Epps, The benefits of Hydrated Lime in Hot Mix Asphalt, National Lime Association, 2001.
35. J. Button, Maximizing the beneficial effects of lime in asphalt paving mixtures, Evaluation and Prevention of Water Damage of Asphalt Paving Materials, ASTM STP 89, 1985.10.1520/STP35329S ↗
36. F. Xiao, F.S. Amirkhanian, Laboratory investigation of moisture damage in warm-mix asphalt containing moist aggregate. Transportation Research Board 88th Annual Meeting, 2009, Transportation Research Board, p. 17.10.3141/2126-14 ↗
37. Influence of production temperature and aggregate moisture content on the initial performance of warm-mix asphalt10.3141/2208-13 ↗
38. Laboratory investigation of moisture damage in warm-mix asphalt containing moist aggregate10.3141/2126-14 ↗
39. Chapuis · 1995
40. Simple performance test for fatigue cracking and validation with WesTrack mixtures10.3141/1789-07 ↗
41. Warm mix asphalt paving technologies: a roadbuilder’s perspective
42. Long-term effectiveness of antistripping additives: laboratory evaluation10.1177/0361198106197000102 ↗
43. Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures10.3141/2209-07 ↗
44. Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000111 ↗
45. Comparative study on the properties of WMA mixture using foamed admixture and free water system10.1016/j.conbuildmat.2013.06.028 ↗
46. Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis10.1016/j.conbuildmat.2015.05.029 ↗
47. Performance of warm mix asphalt containing Sasobit®: state-of-the-art10.1016/j.conbuildmat.2012.08.015 ↗
48. Effects of an amine anti-stripping agent on moisture susceptibility of sasobit and aspha-min mixes by surface free energy analysis10.1520/JTE103618 ↗
49. Effect of sasobit and asphamin on wettability and adhesion between asphalt binders and aggregates10.3141/2051-10 ↗
50. Influence of commercial wax on performance of asphalt10.1061/(ASCE)MT.1943-5533.0000016 ↗
51. Novel moisture-conditioning method for adhesive failure of hot-and warm-mix asphalt binders10.3141/2208-14 ↗
52. Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method10.1061/(ASCE)MT.1943-5533.0000455 ↗
53. AASHTO:T283-03, Standard Method of Test for Resistance of Compacted Asphalt Mixture to Moisture Induced Damage, American Association of State Highway and Transportation Officials, 2003.