journal article·2016-11

Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete

Jong-Han Lee, Baiksoon Cho, Eunsoo Choi, Yong-Hyung Kim

Publisher page

Abstract

Abstract In this paper, an experimental study was performed to examine the flexural capacity of concrete reinforced with macro-type high strength polypropylene fiber. Four fiber volume fractions, 0.25, 0.5, 0.75, and 1.0%, and three concrete compressive strengths, 30, 40, and 60 MPa, were involved to determine the effects of the high strength polypropylene fiber on the flexural capacity of fiber-reinforced concrete. The stress and deflection curves, residual strength, and energy absorption capacity obtained from the experiment were used to investigate the flexural capacity of high strength polypropylene fiber-reinforced concrete, particularly in high strength concrete. High strength concrete reinforced with a 0.25% volume fraction of high strength polypropylene fiber showed a flexural capacity lower than normal strength concrete reinforced with the same volume fraction. The reinforcing effect of the high strength polypropylene fiber in the flexural capacity of high strength concrete was excellent at volume fractions more than 0.50%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Experimental relationship between splitting tensile strength and compressive strength of GFRC and PFRC10.1016/j.cemconres.2004.09.010 ↗
2. Polypropylene-x mortar mixes: optimization to control plastic shrinkage10.1016/S0266-3538(97)00012-2 ↗
3. Mechanical properties of glass fiber reinforced ceramic concrete10.1016/j.conbuildmat.2013.10.046 ↗
4. Experimental research for the effect of high temperature on the mechanical properties of steel fiber-reinforced concrete10.1016/j.conbuildmat.2014.11.005 ↗
5. Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study10.1016/j.conbuildmat.2015.10.006 ↗
6. Self-consolidating hybrid fiber reinforced concrete: Development, properties and composite behavior10.1016/j.conbuildmat.2015.12.062 ↗
7. Fiber-type effects on the performance of steel fiber reinforced concrete
8. Comparative flexural behavior of four fiber reinforced cementitious composites10.1016/j.cemconcomp.2008.08.002 ↗
9. Flexural behaviour of RC beams in fiber reinforced concrete10.1016/j.compositesb.2012.06.003 ↗
10. Compressive behavior of fiber-reinforced concrete with end-hooked steel fibers10.3390/ma8041442 ↗
11. Evaluation of minimum reinforced ratio in FRC members and application to tunnel linings10.1617/s11527-006-9166-0 ↗
12. Naaman · 1996
13. Flexural toughness of steel fiber reinforced concrete
14. Daniel · 1994
15. Steel fiber concrete slabs on ground: A structural matter
16. Design of ground floor slab according to the method for evaluating the tensile performance of steel fiber reinforced concrete10.4334/JKCI.2016.28.1.095 ↗
17. 2003
18. 2010
19. 2013
20. 2015
21. Application of fibrillated polypropylene fibers for restraint of plastic shrinkage cracking in silica fume concrete
22. The effects of polypropylene fibers on the properties of reinforced concrete structures10.1016/j.conbuildmat.2011.08.015 ↗
23. Evaluation of engineering properties for polypropylene fiber reinforced concrete
24. The prospects of using polypropylene fibers as an additive in high quality concrete
25. Comparative study on the flexural performance of concrete reinforced with polypropylene and steel Fibers
26. Properties of polypropylene fiber reinforced concrete
27. The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete10.1016/j.conbuildmat.2009.11.025 ↗
28. Flexural performance of fibre reinforced concrete made with steel and synthetic fibres10.1016/j.conbuildmat.2012.06.042 ↗
29. Enhancement of shrinkage behavior of lightweight aggregate concretes by shrinkage reducing admixture and fiber reinforcement10.1016/j.conbuildmat.2013.12.041 ↗
30. Mechanical behavior of sustainable hybrid-synthetic fiber reinforced cellular light weight concrete for structural applications of masonry10.1016/j.conbuildmat.2015.08.137 ↗
31. 2007
32. Fracture toughness of fiber reinforced concrete
33. 1985 · 45