Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass
Source abstract
Abstract
Abstract The reinforcement for jointed rock mass using rock bolts has always been one of the most effective and economical geo-structural reinforcing technologies widely used in practical civil engineer projects for a long time. In the field of rock mass engineering, the reinforcement effect of the rock bolt(s) on rock mass is much more obvious due to a large number of natural fractures in rock masses. In this paper, an optimized method using Discontinuous Deformation Analysis for Rock Failure (DDARF) is presented to perform numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass. In order to verify the effectiveness of the proposed optimized DDARF, laboratory experiments using analog material have also been performed. Experimental results are very favorable with those obtained by the optimized DDARF. Moreover, this numerical method has also been employed to study mechanical property and reinforcement effect of rock specimen with single joint and single rock bolt when the joint and rock bolt have different locations in the specimens. The optimal reinforced location for the rock bolt in the specimen has been obtained through the comparative analysis of reinforcement effects under different conditions. The single jointed rock specimens with two rock bolts have also been numerically simulated and the optimal reinforcing location for the rock bolts has also been obtained. It is concluded that this optimized DDARF would provide an alternative effective tool to investigate the mechanical property and reinforcement effect for bolted jointed rock mass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Quasi-three-dimensional physical model tests on a cavern complex under high in-situ stresses10.1016/j.ijrmms.2010.11.008 ↗
2. A damage rheology model applied to analysis of splitting failure in underground caverns of Jinping I hydropower station10.1016/j.ijrmms.2014.04.027 ↗
3. Numerical study on crack propagation in brittle jointed rock mass influenced by fracture water pressure10.3390/ma8063364 ↗
4. Numerical investigations on slope stability using an elasto-brittle model considering fissure water pressure10.1007/s12517-015-1967-4 ↗
5. Structural stability monitoring of a physical model test on an underground cavern group during deep excavations using FBG sensors10.3390/s150921696 ↗
6. A modified initial in-situ stress inversion method based on FLAC3D with an engineering application10.1515/geo-2015-0065 ↗
7. Experimental and numerical investigations on the shear behavior of a jointed rock mass10.1007/s12303-015-0052-z ↗
8. Investigation of fracturing process of rock-like Brazilian disks containing three parallel cracks under compressive line loading10.1007/s11223-014-9562-6 ↗
9. Experimental and numerical study of crack propagation and coalescence in pre-cracked rock-like disks10.1016/j.ijrmms.2014.01.008 ↗
10. Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression10.1007/s11771-014-2194-y ↗
11. Analysis of EDZ development of columnar jointed rock mass in the Baihetan diversion tunnel
12. Numerical study of the mechanical behavior of nonpersistent jointed rock masses
13. An experimental study on anchorage strength and deformation behavior of large-scale jointed rock mass10.1016/j.tust.2014.05.006 ↗
14. Modeling the progressive failure of jointed rock slope using fracture mechanics and the strength reduction method
15. Displacement forecasting method in brittle crack surrounding rock under excavation unloading incorporating opening deformation10.1007/s00603-014-0599-4 ↗
16. A coupled experimental and numerical simulation of rock slope joints behavior10.1007/s12517-014-1741-z ↗
17. Anisotropic shear behavior of closely jointed rock masses10.1016/j.ijrmms.2014.07.013 ↗
18. Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression10.1016/j.compgeo.2012.10.012 ↗
19. History of the sprayed concrete lining method—part I: milestones up to the 1960s10.1016/S0886-7798(03)00005-1 ↗
20. History of the sprayed concrete lining method—part II: milestones up to the 1960s10.1016/S0886-7798(03)00006-3 ↗
21. The shear strength of reinforced rock joints10.1016/0148-9062(95)00002-X ↗
22. Jalalifar · 2006
23. Effect of fully grouted passive bolts on joint shear strength parameters in a blocky mass10.1007/s00603-014-0615-8 ↗
24. Failure mechanism of bolting support and high-strength bolt-grouting technology for deep and soft surrounding rock with high stress10.1007/s11771-016-3089-x ↗
25. Mechanical properties and failure characteristics of fractured sandstone with grouting and anchorage10.1016/j.ijmst.2014.01.004 ↗
26. Zhu · 2002
27. Numerical simulation and testing study of large deformation for cavern’s surrounding jointed rockmass
28. Catastrophe model of crack propagating in bolt-supported jointed rock mass
29. Application of fracture-damage model to anchorage of discontinuous jointed rock mass of excavation and supporting
30. Rheological model of DMFC rockbolt and rockmass in a circular tunnel
31. Quasi-static laboratory testing of a new rock bolt for energy-absorbing applications10.1016/j.tust.2013.05.010 ↗
32. The behaviour of fully-bonded rock bolts in the Kielder experimental tunnel
33. Stress distribution along a resin grouted rock anchor10.1016/0148-9062(75)90168-0 ↗
34. Load distribution along fully grouted bolts, with emphasis on cable bolt reinforcement10.1002/(SICI)1096-9853(199607)20:7<517::AID-NAG833>3.0.CO;2-L ↗
35. An experimental procedure for the in situ testing of cable bolts10.1016/0148-9062(92)92635-P ↗
36. Field observations of rock bolts in high stress rock masses10.1007/s00603-009-0067-8 ↗
37. A new energy-absorbing bolt for rock support in high stress rock masses10.1016/j.ijrmms.2010.01.005 ↗
38. Dight · 1983
39. 3D behaviour of bolted rock joints: experimental and numerical study10.1016/j.ijrmms.2004.06.003 ↗
40. Experimental and 3D numerical simulation of reinforced shear joints10.1007/s00603-009-0031-7 ↗
41. Behavior of fiber glass bolts, rock bolts and cable bolts in shear
42. Experimental study on mechanical characteristics of cracked rock mass reinforced by bolting and grouting
43. Experimental study on reinforced effect of bolts on 3D surface fractured rock under uniaxial tension
44. Analytical models for rock bolts10.1016/S1365-1609(99)00064-7 ↗
45. Analytical model for the design of grouted rock bolts10.1002/nag.1610140402 ↗
46. Analytical model for the mechanical behaviour of bolted rock joints subjected to shearing10.1007/BF01079755 ↗
47. Analytical and numerical study of the mechanics of rockbolt reinforcement around tunnels in rock masses10.1007/s00603-009-0178-2 ↗
48. Analytical behaviour of bolt-joint intersection under lateral loading conditions10.1007/s00603-009-0032-6 ↗
49. Analytical model of shear behaviour of a fully grouted cable bolt subjected to shearing10.1016/j.ijrmms.2015.09.005 ↗
50. Analysis of inflatable rock bolts10.1007/s00603-015-0735-9 ↗
51. Numerical simulation of the convergence of a bolt-supported tunnel through a homogenization method10.1002/nag.1610190404 ↗
52. Composite element model of the fully grouted rock bolt10.1007/s00603-003-0006-z ↗
53. Numerical simulation on bolted rock joint shearing performance
54. Modelling of fully grouted rock bolt based on enriched finite element method10.1016/j.ijrmms.2010.11.015 ↗
55. Finite difference numerical simulation of guided wave propagation in the full grouted rock bolt10.1007/s11431-010-4251-6 ↗
56. Simulation of fully grouted rockbolts in underground roadways using FLAC2D10.1139/cgj-2013-0338 ↗
57. Numerical modeling of fully grouted rockbolts reaching free-end slip
58. Development of rock bolt elements in two-dimensional discontinuous deformation analysis10.1007/s00603-013-0525-1 ↗
59. Jiao · 2010
60. A two-dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing10.1002/nag.2314 ↗
61. Shi · 1988
62. Validation of Monte Carlo simulation for discontinuity locations in space10.1016/j.compgeo.2015.02.016 ↗
63. Simulation of failure process of jointed rock10.1007/s11771-008-0162-0 ↗
64. Generation of three-dimensional unstructured grids by the advancing front method10.1002/fld.1650081003 ↗