Estimated and real durability of unfired clay bricks: Determining factors and representativeness of the laboratory tests
Source abstract
Abstract
Abstract This paper presents an analysis of the representativeness of the main laboratory tests and the real durability of earth-based construction materials. For this study, a natural marl soil, mixed with different percentages of silica sand, was treated with portland cement, hydraulic lime, a mix of lime and ground granulated blastfurnace slag and other binder composed of a high magnesium oxide waste mixed with ground granulated blastfurnace slag. All the combinations were characterized based on the usual durability related laboratory tests as are: maximum density, unconfined compressive strength, wetting and drying, Swinburne accelerated erosion resistance, capillarity water absorption, total water absorption and freeze/thawing cycles. The results of these tests have been related to the real durability of the samples for eighteen months of outdoor exposure. They revealed the positive effect of sand adding in the materials durability and the great result of the binder based on magnesium oxide with ground granulated blastfurnace slag. It was also demonstrated the representativeness of the water absorption test as a durability indicator of earth based construction materials durability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. A soil block with a compressive strength higher than 45 MPa!10.1016/j.conbuildmat.2013.05.068 ↗
2. Economical stabilization of clay for earth buildings construction in rainy and flood prone areas10.1016/j.conbuildmat.2014.12.046 ↗
3. Advances on the assessment of soil suitability for rammed earth10.1016/j.conbuildmat.2012.12.049 ↗
4. Assessment of compressed earth blocks made in Spain: international durability tests10.1016/j.conbuildmat.2012.08.019 ↗
5. Incorporation of residues from the minero-metallurgical industry in the production of clayelime brick10.1016/j.jclepro.2014.09.013 ↗
6. H. Guillaud, H. Houben, 2006. Traité de construction en terre. CRATerre.
7. Designed non-fired clay mixes for sustainable and low carbon use10.1016/j.clay.2012.02.021 ↗
8. From the experimental characterization of the hygrothermal properties of straw-clay mixtures to the numerical assessment of their buffering potential10.1016/j.buildenv.2015.12.004 ↗
9. Properties of cement-based bricks with oyster-shells ash10.1016/j.jclepro.2014.12.023 ↗
10. The use of stabilised Spanish clay soil for sustainable construction materials10.1016/j.enggeo.2012.02.010 ↗
11. Alumina filler waste as clay replacement material for unfired brick production10.1016/j.enggeo.2013.05.006 ↗
12. Engineering characteristics of the compressed-stabilized earth brick10.1016/j.conbuildmat.2011.04.061 ↗
13. Performance of bricks made using fly ash and bottom ash10.1016/j.conbuildmat.2015.08.068 ↗
14. Engineering properties of unfired clay masonry bricks10.1016/j.enggeo.2009.05.002 ↗
15. Compressive strength and microstructural analysis of unfired clay masonry bricks10.1016/j.enggeo.2009.08.010 ↗
16. Design thermal values for unfired clay bricks10.1016/j.matdes.2009.07.011 ↗
17. Stabilised unfired clay bricks for environmental and sustainable use10.1016/j.clay.2012.01.011 ↗
18. Development of sustainable construction material using industrial and agricultural solid waste: a review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
19. Stabilization of expansive soils for use in construction10.1016/j.clay.2010.12.027 ↗
20. Seco, A., Ramírez, F., Miqueleiz, L., Urmeneta, P., Garcia, B., Prieto, E., Oroz, V., 2012. Types of Waste for the Production of Pozzolanic Materials – A Review. Industrial Waste. Prof. Kuan-Yeow Show (Ed.), ISBN: 978- 953-51-0253-3, InTech, Available from: .10.5772/36285 ↗
21. Influence of freeze–thaw cycles on mechanical properties of historical brick masonry10.1016/j.conbuildmat.2015.03.077 ↗