Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores
Source abstract
Abstract
Abstract To assess concrete strength in a structure, nondestructive technique (NDT) like rebound hammer is combined with destructive technique (coring tests) in order to implement a relationship ‘‘conversion model” between the compressive strength and, NDT measurements. The conversion model is used to estimate the local strength value at each test location using the corresponding NDT value. Then the estimated mean strength and/or estimated strength standard deviation (concrete strength variability) values are calculated. However, the reliability of these estimated values is always a questionable issue because of the uncertainties associated with the strength predictions based upon NDT measurements. To improve the reliability, the uncertainties must be reduced by specifying and controlling their influencing factors. The objective of this paper is to study the reliability of assessment by analyzing the effects of several influencing factors: number of test locations used to identify a conversion model between strength and rebound measurement NC (number of cores), true value of concrete strength variability, within-test variability of rebound measurements, accepted uncertainty level, quantity to be assessed (mean strength, strength variability), model identification approach (like regression) and the way of selection core locations (random or conditional i.e. selection based on NDT measurements from preliminary investigation). To this end, a large campaign of laboratory studies datasets (1700 test results) was considered for the analysis in the present study. Results show that NC , within-test variability of rebound measurements and true concrete strength variability have significant effects on the assessment reliability. Conditional selection of cores has also an important effect on improving the reliability so it is strongly recommended.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Infrastructure Maintenance and Monitoring · Advanced Statistical Methods and Models · Scientific Measurement and Uncertainty Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Recommendations for testing concrete by hardness methods, Tentative recommendation, 7-NDT committee – nondestructive testing
2. Pessiki SP (chair). In-place methods to estimate concrete strengths. ACI 228.1R-03 report; 2003.
3. IAEA International Atomic Energy Agency. Guidebook on non-destructive testing of concrete structures. Testing Training Course Series No. 17; 2002.
4. Criteria for identifying concrete homogeneous areas for the estimation of in-situ strength in RC buildings10.1016/j.conbuildmat.2016.06.017 ↗
5. EN 13791 · 2007
6. Nondestructive evaluation of concrete strength: an historical review and new perspective by combining NDT methods10.1016/j.conbuildmat.2011.12.103 ↗
7. Non-destructive assessment of both mean strength and variability of concrete: a new bi-objective approach10.1016/j.conbuildmat.2016.03.120 ↗
8. Proverbio E, Venturi V. Reliability of nondestructive tests for on site concrete strength. 10th International Conf. on Durability of Building Materials and Components, Lyon, 17–20 April 2005.
9. Rebound hammer
10. Carino · 1997
11. Calibration and reliability of the rebound (Schmidt) hammer test10.13189/cea.2013.010303 ↗
12. Reinforced concrete structure: nondestructive in situ strength assessment of concrete10.1016/j.conbuildmat.2014.11.023 ↗
13. A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing10.1007/BF02482712 ↗
14. Concrete strength by combined nondestructive methods simply and reliably predicted10.1016/S0008-8846(00)00226-X ↗
15. Malhotra · 2004
16. Ministry of railways (India). Guidelines on non-destructive testing of bridges BS – 103 August, 2009.
17. 50 years of experience with the Schmidt rebound hammer
18. FHWA. Guide to non-destructive testing of concrete, FHWA-SA-97-105, USDOT, Washington DC, 1997.
19. Extensive statistical analysis of the variability of concrete rebound hardness based on a large database of 60 years experience10.1016/j.conbuildmat.2013.11.113 ↗
20. Nondestructive testing of concrete: history and challenges, SP 144–30
21. Assessment of the concrete strength in existing buildings using finite population approach10.1016/j.conbuildmat.2016.02.021 ↗
22. ASTM C805–97. Standard test method for rebound number of hardened concrete. ASTM Standards, West Conshohocken; 1997.
23. Bungey · 1996
24. Non-destructive strength evaluation of concrete: analysis of some key factors using synthetic simulations10.1016/j.conbuildmat.2015.09.023 ↗
25. Szilágyi · 2013
26. Walkenbach · 2013
27. Breysse D et al. Comparing investigation approaches and NDT methodologies for concrete strength estimation: an international benchmark. NDT-CE conf. Berlin, 15–17 Sept. 2015.
28. Using Monte-Carlo simulations to evaluate the efficiency of different strategies for nondestructive assessment of concrete strength10.1617/s11527-016-0962-x ↗
29. Evaluation of concrete strength by means of ultrasonic waves: a method for the selection of coring position10.1016/j.conbuildmat.2014.03.017 ↗
30. Montgomery · 2003
31. Standard errors: a review and evaluation of standard error estimators using Monte Carlo simulations10.20982/tqmp.10.2.p107 ↗