journal article·2017-11

Triaxial compressive strength experiment study of recycled aggregate concrete after high temperatures

Ercong Meng, Yalin Yu, Jun Yuan, Ke Qiao, Yisheng Su

Publisher page

Abstract

Abstract To study the triaxial compressive properties of recycled aggregate concrete (RAC) after high temperature, 100 Ф100 mm × 200 mm cylindrical RAC specimens with different replacement rate (0%, 30%, 70%, 100%) were fabricated to the conventional triaxial experiment (with the lateral confining stress of 0 MPa, 5 MPa, 10 MPa, 15 MPa and 20 MPa) after exposure to different high temperatures (20 °C, 200 °C, 300 °C, 400 °C, 500 °C). The results show that the specimens present longitudinal splitting failure form when under uniaxial stress condition and inclined plane shear or flake splitting failure form when under triaxial stress condition. The triaxial compressive strength presents the trend of decreasing → increasing → decreasing with the increase of replacement rate. Improving lateral confining stress can effectively improve the compressive strength of RAC. The triaxial strength of specimens is almost equal to each other when the temperatures do not exceed 400 °C. After 500 °C high temperature, the triaxial strength will gradually decrease, but the decrease amplitude is far less than that of uniaxial strength. Based on test data and some related theories, the triaxial strength calculation formula of RAC with different replacement rate after high temperatures was given. And it can provide some references for the related research and practical engineering application of RAC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. An overview of study on recycled aggregate concrete in China10.1016/j.conbuildmat.2011.12.074 ↗
2. Recent studies on mechanical properties of recycled aggregate concrete in China-a review10.1007/s11431-012-4786-9 ↗
3. Influence of crushing index on properties of recycled aggregates pervious concrete10.1016/j.conbuildmat.2012.12.046 ↗
4. Properties of pervious geopolymer concrete using recycled aggregates10.1016/j.conbuildmat.2012.12.046 ↗
5. Lange, Effect of joint interface conditions on shear transfer behavior of recycled aggregate concrete10.1016/j.conbuildmat.2015.12.015 ↗
6. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
7. Mechanical properties of concrete with recycled coarse aggregate10.1016/j.buildenv.2005.07.033 ↗
8. Improvement on strength and impermeability of recycled concrete made from crushed concrete coarse aggregate10.1023/A:1020349011716 ↗
9. Shear transfer across a crack in recycled aggregate concrete10.1016/j.cemconres.2012.02.006 ↗
10. Carbonation dominates the acid intake of recycled concrete aggregate subjected to intermittent leaching10.1016/j.conbuildmat.2015.04.038 ↗
11. S-i Miyazato, W. Yodsudjai, Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete10.1061/(ASCE)0899-1561(2003)15:5(443) ↗
12. The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste10.1016/j.cemconcomp.2011.04.002 ↗
13. Experimental study on the shearing property of equal strength recycled coarse aggregate concrete10.4028/www.scientific.net/AMM.357-360.1420 ↗
14. Structural damage evaluation of reinforced concrete beams exposed to high temperatures10.1177/1042391512474666 ↗
15. Microstructure of fire-damaged concrete. A case study10.1016/j.cemconcomp.2004.02.022 ↗
16. Residual stress–strain relationship for concrete after exposure to high temperatures10.1016/j.cemconres.2006.05.029 ↗
17. Residual mechanical properties of high-strength concretes after Exposure to Elevated Temperatures10.1061/(ASCE)0899-1561(2010)22:1(59) ↗
18. Effect of fire on concrete and concrete structures10.1002/pse.51 ↗
19. Recycled concrete made with different natural coarse aggregates exposed to high temperature10.1016/j.conbuildmat.2008.08.017 ↗
20. Recycled concrete exposed to high temperatures10.1680/macr.2006.58.10.675 ↗
21. Fire damage and residual strengths of recycled aggregate concrete10.4028/www.scientific.net/KEM.348-349.937 ↗
22. Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates10.1016/j.cemconres.2011.02.002 ↗
23. Strength characteristics and failure criterion of plain recycled aggregate concrete under triaxial stress states10.1016/j.conbuildmat.2013.12.075 ↗
24. Wu, Triaxial test for concrete under non-uniform passive confinement
25. Compressive strength of plain concrete under multiaxial loading conditions
26. Experimental study on strength and deformation of plain concrete under triaxial compression after freeze-thaw cycles10.1016/j.buildenv.2006.08.027 ↗
27. Finite-element modeling of actively confined normal-strength and high-strength concrete under uniaxial, biaxial, and triaxial compression
28. Finite element modeling of confined concrete-I: Drucker-Prager type plasticity model10.1016/j.engstruct.2009.11.014 ↗
29. Finite element modeling of confined concrete-II: plastic-damage model10.1016/j.engstruct.2009.11.013 ↗
30. Recycled aggregate concrete-mechanical behavior under uniaxial and triaxial compression10.1016/j.conbuildmat.2014.01.073 ↗
31. The National Standards Compilation Group of the People’s Republic of China · 2007
32. The National Standards Compilation Group of the People’s Republic of China · 2011
33. The National Standards Compilation Group of the People’s Republic of China · 1985
34. Shear behavior of recycled aggregate concrete after exposure to high temperatures10.1016/j.conbuildmat.2015.12.103 ↗
35. Yang · 2012
36. Existence of dividing strength in concrete containing recycled coarse aggregate10.1061/(ASCE)MT.1943-5533.0000864 ↗
37. Guo · 2003
38. The National Standards Compilation Group of the People’s Republic of China · 2010