Study of synergy between a natural volcanic pozzolan and a granulated blast furnace slag in the production of geopolymeric pastes and mortars
Source abstract
Abstract
Abstract The production and characterization of a cement and mortar based on the alkaline activation of a high content (≥70%) of natural volcanic pozzolan (NP) and the synergic effect of the addition of granulated blast furnace slag (GBFS) up to 30% were performed. NaOH and a mixture of NaOH + Na2SiO3 were used as activators. The results of this study highlight the possibility of obtaining a binder with a compressive strength of up to 125 MPa at 28 days of curing (25 °C). The optimal alkaline cement that was obtained can be categorized as GU- and LH-type cement according to the ASTM C1157 standard.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. V.D. Glukhovsky, G.S. Rostovskaja, G.V. Rumyna, High strength slag-alkaline cements, in: Proceedings of the 7th international congress on the chemistry of cement, Paris, 1980, pp. 164–168.
2. P.V. Krivenko, Fly Ash-alkali cements and concretes silica fume, slag and natural pozzolans in concrete, Istanbul (Turkey), in: Proc. Fourth CANMET-ACI Intern. Conf. on Fly Ash, 1992, pp. 721–734.
3. Research on alkali-activated cementitious systems in China: a review10.1680/adcr.1993.5.17.1 ↗
4. J. Davidovits, Properties of geopolymer cements, in: First international conference on alkaline cements and concretes, 1994, pp. 131–149.
5. Alkaline activated slag cements: current situation and future prospects10.3989/mc.1995.v45.i239.553 ↗
6. Provis · 2009
7. A review on the utilization of fly ash10.1016/j.pecs.2009.11.003 ↗
8. A review of waste products utilized as supplements to Portland cement in concrete10.1016/j.jclepro.2016.02.013 ↗
9. Fabrication of a non-cement binder using slag, palm oil fuel ash and rice husk ash with sodium hydroxide10.1016/j.conbuildmat.2013.08.077 ↗
10. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
11. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
12. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
13. Potential of geopolymer technology towards green buildings and sustainable cities10.1016/j.proeng.2011.11.2108 ↗
14. Clay reactivity: production of alkali activated cements10.1016/j.clay.2012.10.012 ↗
15. Natural pozzolan-and granulated blast furnace slag-based binary geopolymers10.3989/mc.2016.03615 ↗
16. CO2 emission trading within the European Union and Annex B countries: the cement industry case10.1016/j.enpol.2004.06.003 ↗
17. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
18. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
19. I. Garcia-Lodeiro, A. Fernandez-Jiménez, A. Palomo, Alkali-activated based concrete (Chapter 17), Eco-efficient concrete (2013) 439–487. doi: 10.1533/9780857098993.4.439.10.1533/9780857098993.4.439 ↗
20. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
21. Life cycle assessment (LCA) of alkali-activated cements and concretes
22. Terminology, concepts and geographic distribution of volcanic ash soils
23. Applicability of the standard specifications of ASTM C618 for evaluation of natural pozzolans10.1016/j.cemconcomp.2010.08.007 ↗
24. Soils derived from volcanic ash in Colombia
25. Evaluation of the geotechnical behaviour of Chilean volcanic soils for use as filter material in domestic wastewater treatment
26. Distribution and classification of volcanic ash soils
27. Investigating the possibility of utilizing pumice-type natural pozzolan in production of geopolymer cement
28. Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash10.1016/j.ceramint.2011.05.002 ↗
29. Engineering properties of alkali-activated natural pozzolan concrete
30. Synthesis of geopolymers from volcanic ash via the alkaline fusion method: effect of Al2O3/Na2O molar ratio of soda–volcanic ash10.1016/j.ceramint.2012.06.021 ↗
31. Effect of heat treatment on reactivity-strength of alkali-activated natural pozzolans10.1016/j.conbuildmat.2011.04.044 ↗
32. Fabrication and characterization of hardened bodies from Japanese volcanic ash using geopolymerization10.1016/j.ceramint.2013.08.061 ↗
33. Influence of the chemical and mineralogical composition on the reactivity of volcanic ashes during alkali activation10.1016/j.ceramint.2013.06.072 ↗
34. Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties10.1039/C6RA03667H ↗
35. Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan10.1007/s10853-009-3411-1 ↗
36. Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans10.1016/j.cemconcomp.2010.10.021 ↗
37. The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: a comparative study10.1016/j.conbuildmat.2012.04.023 ↗
38. Study on the suitability of volcanic amorphous aluminosilicate rocks (perlite) for the synthesis of geopolymer-based concrete Geopolymer Binder Systems
39. Effect of adding mineral additives to alkali-activated natural pozzolan paste10.1016/j.conbuildmat.2010.12.031 ↗
40. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
41. Synthesis of volcanic ash-based geopolymer mortars by fusion method: effects of adding metakaolin to fused volcanic ash10.1016/j.ceramint.2012.08.003 ↗
42. Synthesis of geopolymer composites from a mixture of volcanic scoria and metakaolin10.1016/j.jascer.2014.08.003 ↗
43. Influence of calcium aluminate cement on geopolymerization of natural pozzolan10.1016/j.conbuildmat.2016.03.204 ↗
44. Effect of metakaolin on natural volcanic pozzolan-based geopolymer cement10.1016/j.clay.2016.07.020 ↗
45. Structure of calcium silicate hydrates formed in alkaline-activated slag: influence of the type of alkaline activator10.1111/j.1151-2916.2003.tb03481.x ↗
46. A model for the CASH gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
47. Effects of blast-furnace slag on natural pozzolan-based geopolymer cement
48. The effect of type and concentration of activators on flowability and compressive strength of natural pozzolan and slag-based geopolymers10.1016/j.conbuildmat.2016.02.086 ↗
49. Rietveld quantitative amorphous content analysis10.1107/S0021889801002485 ↗
50. Natural pozzolan-based geopolymers for sustainable construction10.1007/s12665-016-5898-5 ↗
51. Partial replacement of volcanic ash by bauxite and calcined oyster shell in the synthesis of volcanic ash-based geopolymers10.1016/j.conbuildmat.2016.03.104 ↗
52. Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions10.1007/s10853-016-0257-1 ↗
53. Potential of inorganic polymers (geopolymers) made of halloysite and volcanic glass for the immobilisation of tailings from gold extraction in Ecuador10.1016/j.clay.2015.02.025 ↗
54. Rational utilization of volcanic ashes based on factors affecting their alkaline activation10.1016/j.jnoncrysol.2017.02.024 ↗
55. Influence of the activating solution composition on the stability and thermo-mechanical properties of inorganic polymers (geopolymers) from volcanic ash10.1016/j.conbuildmat.2013.06.089 ↗
56. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
57. Characterization of natural pozzolan-based geopolymeric binders10.1016/j.cemconcomp.2014.06.010 ↗
58. Structure of calcium silicate hydrates formed in alkaline-activated slag: influence of the type of alkaline activator10.1111/j.1151-2916.2003.tb03481.x ↗
59. Determination of kinetic equations of alkaline activation of blast furnace slag by means of calorimetric data10.1023/A:1010172204297 ↗
60. Hydration of Hybrid alkaline cement containing a very large proportion of fly ash: a descriptive model10.3390/ma9070605 ↗
61. Alkali-activated slag cements: kinetic studies10.1016/S0008-8846(97)00040-9 ↗
62. Reaction kinetics in sodium silicate powder and liquid activated slag binders evaluated using isothermal calorimetry10.1016/j.tca.2012.07.010 ↗
63. Hydration kinetics in hybrid binders: early reaction stages10.1016/j.cemconcomp.2013.03.025 ↗
64. Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature10.1016/j.cemconcomp.2013.03.010 ↗
65. Calorimetric study of geopolymer binders based on natural pozzolan
66. Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders10.1016/j.conbuildmat.2016.03.098 ↗
67. Effect of alkalis on fresh C–S–H gels. FTIR analysis10.1016/j.cemconres.2009.01.003 ↗
68. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
69. Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction10.1016/j.cemconres.2015.01.006 ↗
70. Gel composition and strength properties of alkali-activated oyster shell-volcanic ash: effect of synthesis conditions10.1111/jace.14332 ↗
71. Variation in hybrid cements over time. Alkaline activation of fly ash–Portland cement blends10.1016/j.cemconres.2013.03.022 ↗
72. Structural study of geopolymers obtained from alkali-activated natural pozzolan feldspars10.1016/j.ceramint.2016.11.070 ↗
73. Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement10.1016/j.conbuildmat.2016.03.043 ↗
74. Alkali-activated Portland blast-furnace slag cement: mechanical properties and hydration10.1016/j.conbuildmat.2017.02.092 ↗
75. Alkaline hydration of C2S and C3S10.1111/jace.13985 ↗
76. Alkaline activation of aluminosilicates as an alternative to Portland cement: a review