journal article·2017-12

Synthesis & characterization of natural soil based inorganic polymer foam for thermal insulations

Syed Farrukh Alam Zaidi, Ehsan Ul Haq, Khushnuda Nur, Noveed Ejaz, M. Anis-ur-Rehman, Muhammad Zubair, Muhammad Naveed

Publisher page

Abstract

Abstract Thermal insulations are important in controlling the inner environment of the buildings. Geopolymer foams, also known as inorganic polymer foams, have attracted more attention among the inorganic class because of their sustainability and being environment friendly materials. In this research work natural soil based inorganic polymer foams have been successfully produced using low cost and abundantly available soil as aluminosilicate precursor. Samples with varying amounts of soil and liquid contents (NaOH and Na2SiO3 as alkaline activator solution) were used to prepare foams where hydrogen peroxide was used as foaming agent. The foamed slurries were poured into the molds and cured. The minimum thermal conductivity of 0.2670 W/mK was achieved at bulk density of 0.8630 gcm−3, total porosity of 63.1% and compressive strength of 2.41 MPa for inorganic polymer foam containing 70% soil and 30% liquid composition. The highest compressive strength was achieved at 74% soil and 26% liquid composition. These properties were related to degree of inorganic polymerization using XRD and FTIR analyses. These foam materials can potentially be used as building thermal insulations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Modelling of carbon dioxide measurement on cement plants
2. CO2 emissions due to cement manufacture10.4028/www.scientific.net/MSF.685.181 ↗
3. A life-cycle assessment of cement manufacturing: comparing traditional process with alternative technologies10.1016/j.jclepro.2008.04.007 ↗
4. Flash calcination of kaolinite rich clay and impact of process conditions on the quality of the calcines: a way to reduce CO2 footprint from cement industry10.1016/j.apenergy.2015.04.127 ↗
5. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
6. Preparation of sintered foam materials by alkali-activated coal fly ash10.1016/j.jhazmat.2009.09.023 ↗
7. Preparation and characterization of fly ash based geopolymer mortars10.1016/j.conbuildmat.2010.04.012 ↗
8. Synthesis of thermostable geopolymer from circulating fluidized bed combustion (CFBC) bottom ashes10.1016/j.jhazmat.2009.09.149 ↗
9. Cementless pressed blocks from waste products of coal-firing power station10.1016/j.conbuildmat.2005.08.002 ↗
10. Mechanical properties of fly ash based geopolymer concrete with full and partial cement replacement10.1016/j.conbuildmat.2016.09.059 ↗
11. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash10.1016/j.conbuildmat.2016.08.097 ↗
12. Synthesis and characteristics of fly ash and bottom ash based geopolymers–a comparative study10.1016/j.ceramint.2013.10.012 ↗
13. Valorisation of a kaolin mining waste for the production of geopolymers10.1016/j.jclepro.2015.12.011 ↗
14. Effect of the rate of calcination of kaolin on the properties of metakaolin-based geopolymers10.1016/j.jascer.2014.12.003 ↗
15. Geopolymers based on a coarse low-purity kaolin mineral: Mechanical strength as a function of the chemical composition and temperature10.1016/j.cemconcomp.2011.08.001 ↗
16. Effect of curing temperature and SiO2/K2O molar ratio on the performance of metakaolin-based geopolymers10.1016/j.ceramint.2016.07.139 ↗
17. Effects of Si/Al ratio on the structure and properties of metakaolin based geopolymer10.1016/j.ceramint.2016.06.033 ↗
18. Influence of metakaolin characteristics on the mechanical properties of geopolymers10.1016/j.clay.2013.08.023 ↗
19. Development and optimisation of phase change material-impregnated lightweight aggregates for geopolymer composites made from aluminosilicate rich mud and milled glass powder10.1016/j.conbuildmat.2016.02.029 ↗
20. Manufacturing of building bricks without Portland cement10.1016/j.jclepro.2012.07.047 ↗
21. Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash10.1016/j.conbuildmat.2016.08.153 ↗
22. Synthesis and characterization of geopolymer binders based on local materials from Burkina Faso-Metakaolin and rice husk ash10.1016/j.conbuildmat.2016.07.102 ↗
23. Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production10.1016/j.psep.2016.08.001 ↗
24. Re-use of waste glass in improving properties of metakaolin-based geopolymers: Mechanical and microstructure examinations10.1016/j.conbuildmat.2016.12.023 ↗
25. Recent developments on inorganic polymers synthesis and applications10.1016/j.ceramint.2016.07.027 ↗
26. Geopolymer concrete: a review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
27. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
28. Effects of the metakaolin-based geopolymer on high-temperature performances of geopolymer/PVC composite materials10.1016/j.clay.2015.07.008 ↗
29. Thermal insulating foamy geopolymers from perlite10.1016/j.mineng.2010.07.015 ↗
30. Microwave synthesis of thermal insulating foams from coal derived bottom ash10.1016/j.fuproc.2014.10.017 ↗
31. Development of porous fly ash-based geopolymer with low thermal conductivity
32. Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents10.1016/j.matchar.2016.01.019 ↗
33. Porous biomass fly ash-based geopolymers with tailored thermal conductivity10.1016/j.jclepro.2016.01.083 ↗
34. Silica fume as porogent agent in geo-materials at low temperature10.1016/j.jeurceramsoc.2010.01.014 ↗
35. Geopolymer foams by gelcasting10.1016/j.ceramint.2013.11.011 ↗
36. In situ inorganic foams prepared from various clays at low temperature10.1016/j.clay.2010.10.016 ↗
37. Fly ash based geopolymer lightweight concrete using foaming agent10.3390/ijms13067186 ↗
38. M.S. Cilla, M.R. Morelli, P. Colombo, Open cell geopolymer foams by a novel saponification/peroxide/gelcasting combined route, J. Eur. Ceram. Soc. 34 (12) (2014) 3133–3137. W. Strunk Jr., E.B. White, The Elements of Style, fourth ed., Longman, New York, 2000.10.1016/j.jeurceramsoc.2014.04.001 ↗
39. Murad, Enver, J. Cashion, Mössbauer Spectroscopy of Environmental Materials and Their Industrial Utilization, Springer, US, 2004.10.1007/978-1-4419-9040-2 ↗
40. Setting and curing of mortars obtained by alkali activation and inorganic polymerization from sodium silicate and silica aggregate10.1016/j.conbuildmat.2015.12.064 ↗
41. A modified transient method for an easy and fast determination of thermal conductivities of conductors and insulators'10.1088/0022-3727/35/16/320 ↗
42. Linkage of iron elution and dissolved oxygen consumption with removal of organic pollutants by nanoscale zero-valent iron: effects of pH on iron dissolution and formation of iron oxide/hydroxide layer10.1016/j.chemosphere.2015.10.064 ↗
43. Enthalpy of formation of wollastonite (CaSiO3) and anorthite (CaAl2Si2O8) by experimental phase equilibrium measurements and high-temperature solution colorimetry
44. Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers10.1016/j.conbuildmat.2012.04.102 ↗
45. A novel method to produce dry geopolymer cement powder10.1016/j.hbrcj.2014.06.008 ↗
46. In-situ carbonation of alkali activated fly ash geopolymer10.1016/j.conbuildmat.2014.06.012 ↗
47. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete10.1016/j.enbuild.2010.11.008 ↗
48. H. Zhang, Building Materials in Civil Engineering, first ed., Woodhead Publishing, 2011.10.1533/9781845699567 ↗
49. Elevated-temperature thermal properties of lightweight foamed concrete10.1016/j.conbuildmat.2010.07.016 ↗
50. Potassium geopolymer foams made with silica fume pore forming agent for thermal insulation10.1007/s10934-012-9572-3 ↗