journal article·2018-01Open access

Physical and mechanical properties of plasters incorporating aerogel granules and polypropylene monofilament fibres

Paul Westgate, Kevin Paine, Richard J. Ball

Abstract

Abstract Growing concern over global warming in recent years has required buildings to become significantly more energy efficient. One of the main ways of achieving this aim has been through the use of innovative materials to facilitate improvements in levels of building insulation. This paper describes the use of aerogel granules as an additive material for lime-based plasters, with the objective of improving the thermal efficiency of buildings whilst maintaining or improving vapour permeability. Five experimental lime composite mixes were prepared, with lime putty as the binder material and aggregate comprising differing proportions of standard sand and aerogel granules. Previous work had already confirmed very low strengths for plaster mixes containing aerogel granules alone as the aggregate material; therefore, polypropylene fibres were incorporated as a secondary additive material to improve the mechanical properties and reduce strength loss attributed to shrinkage and cracking. The flexural strength, compressive strength, thermal conductivity and water vapour permeability of lime composite mortars containing different volume fractions of aerogel were determined. Microstructures were examined using scanning electron microscopy and transmission electron microscopy. The results showed that aerogel granules can be successfully incorporated into lime plasters to improve thermal efficiency. The addition of aerogel was also found to improve moisture vapour permeability. The inclusion of polypropylene fibres in aerogel plasters was effective in reducing shrinkage and cracking to acceptable levels. Experimental mixes exhibited a slight reduction in strength compared to standard plaster mixes, although this was compensated for by a high level of flexibility and toughness. This work provides innovative information on utilising aerogel granules as an insulating plaster additive by addressing the issues of strength and flexibility, properties that are not normally associated with aerogel but which are of importance in a functional plaster material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Building materials and conservation · Medieval Architecture and Archaeology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. IPCC · 2014 · 6
2. Edwards · 2011
3. Thermo-hygric properties of a newly developed aerogel based insulation rendering for both exterior and interior applications10.1016/j.enbuild.2011.09.041 ↗
4. Development of innovative aerogel based plasters: preliminary thermal and acoustic performance evaluation10.3390/su6095839 ↗
5. Fixit, Aerogel Insulating Plaster System [online] Available from: http://www.fixit.ch/aerogel/pdf/Fixit_222_Aerogel_Verarbeitungsrichtlinien_A4_EN.pdf 2016 accessed 7 August 2016.
6. The Engineer, 2006, Thermal Conductivity, The Engineer, October 2006.
7. Effect of storage and curing conditions at elevated temperatures on aerogel-incorporated mortar samples based on UHPC recipe
8. Aerogel-based renders with lightweight aggregates: correlation between molecular/pore structure and performance
9. Aerogel insulation for building applications: a state of the art review10.1016/j.enbuild.2010.12.012 ↗
10. M. Ayers, Science of aerogels [online], California: E. O. Lawrence Berkely National Laboratory, Available from: http://energy.lbl.gov/ecs/aerogels/sa-chemistry.html (accessed 9th May 2016), 2016.
11. Aerogel the lightest solid known10.1007/BF02835214 ↗
12. Coherent expanded aerogels
13. H. Canaday, Aerogels look promising for lightweight insulation. AviationWeek.com [online], Available from: http://aviationweek.com/advanced-machines-aerospace-manufacturing/aerogels-look-promising-light-weight-insulation [accessed 21 August 2017], 2016.
14. Effect of low modulus sisal and polypropylene fibre on the free and restrained shrinkage of mortars at an early age10.1016/S0008-8846(99)00136-2 ↗
15. Effect of volume fraction of polypropylene fiber on the mechanical properties of concrete
16. Experimental investigation on mechanical properties of a fiber-reinforced silica aerogel composite10.1016/j.msea.2011.03.013 ↗
17. Laboratory investigation of lime mortars, plasters and renders
18. Greenspec, 2017, Lime mortar, render and plaster [online], Available from: http://www.greenspec.co.uk/building-design/lime-mortar-render/ (accessed 18th January 2017).
19. Microstructural changes of lime putty during aging10.1061/(ASCE)MT.1943-5533.0000687 ↗
20. Moisture properties of plaster and stucco for strawbale buildings
21. Environmental cycling and laboratory testing to evaluate the significance of moisture control for lime mortars10.1016/j.conbuildmat.2010.01.019 ↗
22. Hygrothermal performance of exterior walls covered with aerogel-based insulating rendering
23. Q. Wang, H. Liu, The Experimental Research on the Water Vapour Permeability of Construction Gypsum Plaster Materials, International Conference on Materials for Renewable Energy & Environment, May 2011, vol. 1, pp. 854.10.1109/ICMREE.2011.5930938 ↗
24. Aerogel-based materials for improving the building envelope's thermal behaviour: a brief review with a focus on a new aerogel-based rendering
25. Embodied and operational energy for new-build housing: a case study of construction methods in the UK10.1016/j.enbuild.2013.08.041 ↗
26. Adfil, Monofilament fibres [online] Available from: http://adfil.co.uk/products/micro-synthetic-fibres/monofilament-fibres/ 2016 accessed 12th May 2016.
27. EN 1015-11:1999, Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar, BSI.
28. The use of lime mortars and renders in extreme weather conditions
29. Simultaneous measurement of thermal conductivity and thermal diffusivity of some building materials using the transient hot strip method10.1088/0022-3727/18/1/003 ↗
30. Aerogel-incorporated concrete: An experimental study
31. Infrared spectroscopy of sol–gel derived silica-based films: a spectra-microstructure overview
32. Application of Fourier Transform Infrared Spectroscopy (FTIR) for assessing biogenic silica sample purity in geochemical analyses and palaeoenvironmental research
33. Lambert · 1987 · 176
34. NICODOM, 2012, FTIR Spectra of Polymers [online]. Nicodom s.r.o.: Czech Republic. Available from: http://www.ftir-polymers.com/soon.htm [accessed: 15th May 2016