journal article·2018-02

Influence of matrix and pore system characteristics on the durability of pervious concrete

Rui Zhong, Kay Wille

Publisher page

Abstract

Abstract The application of pervious concrete (PC) is still limited primarily due to the three challenges it faces: limited strength, vulnerability to clogging and durability concerns. The last challenge is assessed in this research. Especially in the cold northern area where cyclic freeze–thaw (F-T) is not uncommon, it is necessary to understand the F-T performance and corresponding failure mechanism of PC. In this research, PCs varying in matrix type (normal strength matrix, high strength matrix and ultra-high strength matrix), pore system characteristics (void size and tortuosity) and fiber reinforcement (reinforced and non-reinforced) were proportioned. The influence of matrix, pore system characteristics and fiber reinforcement on the F-T durability of PC is investigated and potential F-T failure mechanisms are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban Stormwater Management Solutions · Smart Materials for Construction · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. United States Environmental Protection Agency, EPA, Storm Water Technology Fact Sheet: Porous Pavement, 832-F-99-023, September 1999, 6 pages.
2. An experimental study on the water-purification properties of porous concrete10.1016/S0008-8846(03)00223-0 ↗
3. Mineral oil bio-degradation within a permeable pavement: long term observations10.2166/wst.1999.0096 ↗
4. Cyclic heat island impacts on traditional versus pervious concrete pavement systems10.3141/2240-14 ↗
5. N. Neithalath, Development and Characterization of Acoustically Efficient Cementitious Materials. PhD thesis, Purdue University, West Lafayette, IN, 2004, pp. 269.
6. Olek, J., Weiss, W.J., Neithalath, N., Marolf, A., Sell, E., Thornton, W.D. Development of quiet and durable porous Portland cement concrete paving materials. Final report SQDH 2003-5, Purdue University, September 2003, pp. 172.
7. Compression response of normal and high strength pervious concrete10.1016/j.conbuildmat.2016.01.051 ↗
8. Optimum mix design of enhanced permeable concrete – an experimental investigation10.1016/j.conbuildmat.2010.04.057 ↗
9. The relationship between porosity and strength for porous concrete10.1016/j.conbuildmat.2011.05.005 ↗
10. K. Wille, R. Zhong, High strength pervious concrete. Proceedings of Hipermat 2012, in: M. Schmidt, E. Fehling (Eds.), 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, March 7–9, 2012, pp. 825–832.
11. Properties of high-strength porous concrete
12. Evaluation of high-performance porous concrete properties10.1016/j.conbuildmat.2011.12.024 ↗
13. Laboratory evaluation of permeability and strength of polymer-modified pervious concrete10.1016/j.conbuildmat.2009.10.025 ↗
14. Equal arc segment method for averaging data plots exemplified for averaging stress versus strain curves of pervious concrete
15. Hydrologic properties of pervious concrete10.13031/2013.22301 ↗
16. Laboratory investigation of compacted no-fines concrete for paving materials10.1061/(ASCE)0899-1561(1995)7:3(183) ↗
17. Permeability reduction in pervious concretes due to clogging: experiments and modeling10.1061/(ASCE)MT.1943-5533.0000079 ↗
18. Measuring hydraulic conductivity in pervious concrete10.1089/ees.2006.23.960 ↗
19. Predicting the permeability of pervious concrete
20. Influence of pore tortuosity on hydraulic conductivity of pervious concrete: characterization and modeling10.1016/j.conbuildmat.2016.08.060 ↗
21. Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction10.1016/j.matchar.2010.05.004 ↗
22. Characterizing enhanced porosity concrete using electrical impedance to predict acoustic and hydraulic performance10.1016/j.cemconres.2006.09.001 ↗
23. Material design and characterization of high performance pervious concrete10.1016/j.conbuildmat.2015.08.027 ↗
24. Effect of rejuvenation methods on the infiltration rates of pervious concrete pavements10.1061/(ASCE)HE.1943-5584.0000117 ↗
25. Location and depth of pervious concrete clogging material before and after void maintenance with common municipal utility vehicles10.1061/(ASCE)TE.1943-5436.0000327 ↗
26. Effects of soil clogging and water saturation on freeze-thaw durability of pervious concrete10.3141/2164-12 ↗
27. Effect of coarse aggregate on the freeze-thaw durability of pervious concrete10.1061/(ASCE)MT.1943-5533.0000049 ↗
28. Pervious concrete mixture proportions for improved freeze-thaw durability10.1520/JAI101434 ↗
29. Effects of macrosynthetic fibers on pervious concrete properties
30. The effect of curing regime on pervious concrete abrasion resistance10.1520/JTE101761 ↗
31. Z. Yang, H. Briwn, A. Cheney, Influence of moisture conditions on freeze and thaw durability of Portland cement pervious concrete, Concrete Technology Forum: Focus on Pervious Concrete 2006, Nshville, TN, May 24–25.
32. Pervious concrete pavement integrated laboratory and field study10.3141/2113-02 ↗
33. Delatte · 2007
34. Ultra high performance concrete with compressive strength exceeding 150 Mpa (22 ksi): a simple way
35. Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility with no heat curing10.1617/s11527-011-9767-0 ↗
36. Resistance of Portland cement pervious concrete to deicing chemicals10.3141/2164-13 ↗
37. ASTM C666/C666M-15. Standard method for resistance of concrete to rapid freezing and thawing. American Society for Testing and Materials.
38. A working hypothesis for further studies of frost resistance
39. Linking pore system characteristics to the compressive behavior of pervious concrete10.1016/j.cemconcomp.2016.03.016 ↗