Use of basic oxygen furnace slag fines in the production of cementitious mortars and the effects on mortar expansion
Source abstract
Abstract
Abstract The purpose of this study was to examine the properties of ordinary Portland cement (OPC) and alkali-activated slag (AAS) mortars produced with basic oxygen furnace (BOF) slag fines, and to reveal the effects of BOF slag fines on the expansion of the cementitious mortars. The use of BOF slag fines in OPC mortars significantly reduced the compressive strength and slightly increased the volume expansion of the mortars. Significant changes in mineralogical composition were observed in the OPC mortars produced with BOF slag fines after autoclaving. On the other hand, the AAS mortars produced with BOF slag fines had compressive strength comparable to normal OPC mortars, and their volume expansion was much lower than the AAS-Control and all the OPC mortars. The mineralogical compositions of the AAC mortars before and after autoclaving were almost identical. The results of this study indicate that the BOF slag fines are suitable to partially replace the binder for the production of AAS mortars, and the resulting AAS mortars have high volume stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Physical and chemical characteristics of blast furnace, basic oxygen furnace, and electric arc furnace steel industry slags10.1021/es9906002 ↗
2. An overview of utilization of slag and sludge from steel industries10.1016/j.resconrec.2006.05.008 ↗
3. Use of steelworks slag in Europe10.1016/S0956-053X(96)00070-0 ↗
4. Products of steel slags an opportunity to save natural resources10.1016/S0956-053X(00)00102-1 ↗
5. Characteristics and cementitious properties of ladle slag fines from steel production10.1016/S0008-8846(01)00707-4 ↗
6. Characteristics of steel slag under different cooling conditions10.1016/j.wasman.2006.08.002 ↗
7. Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures10.1016/j.buildenv.2006.06.008 ↗
8. Methods for improving volume stability of steel slag as fine aggregate10.1007/s11595-007-5737-3 ↗
9. Characteristics and environmental aspects of slag: a review10.1016/j.apgeochem.2014.04.009 ↗
10. Chemical, mineralogical, and morphological properties of steel slag
11. Physical and chemical characteristics of blast furnace, basic oxygen furnace, and eectric arc furnace steel industry slags10.1021/es9906002 ↗
12. Utilization of weathered basic oxygen furnace slag in the production of hydraulic road binders10.1016/j.conbuildmat.2008.02.015 ↗
13. Recycling of basic oxygen furnace slag in asphalt mixture: material characterization & moisture damage investigation10.1016/j.conbuildmat.2012.06.023 ↗
14. Effectiveness of steam treating method on inhibiting the expansive problem of concrete with slag as aggregate
15. Ladle furnace slag in the construction of embankments: expansive behavior10.1061/(ASCE)MT.1943-5533.0000642 ↗
16. ASTM C1260-14 · 2014
17. ASTM C109/109M-16a · 2016
18. ASTM C151/C151M-16 · 2016
19. Alkali silica reaction of BOF and BFS wastes combination in cement10.3846/13923730.2012.734854 ↗
20. ASTM C1157/C1157M-17 · 2017
21. Hydration properties of basic oxygen furnace steel slag10.1016/j.conbuildmat.2009.12.028 ↗
22. Utilization of Basic Oxygen Furnace (BOF) slag in the production of a hydraulic cement binder10.1016/j.minpro.2006.01.001 ↗
23. ASTM C311/C311M-16 · 2016
24. ASTM C618-15 · 2015
25. Durability of copper slag contained concrete exposed to sulfate attack10.1016/j.conbuildmat.2010.11.067 ↗
26. Effects of non-ground slag and bottom ash as fine aggregate on concrete permeability properties10.1016/j.conbuildmat.2011.06.080 ↗
27. Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete10.1016/j.conbuildmat.2005.09.011 ↗
28. Steel furnace slag aggregate expansion and hardened concrete properties10.1016/j.cemconcomp.2015.04.006 ↗
29. Stability and phase relations of dicalcium silicate hydrates under hydrothermal conditions10.2109/jcersj.114.174 ↗
30. Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars10.1016/j.conbuildmat.2011.10.063 ↗
31. Effect of fly ash fineness on microstructure of blended cement paste10.1016/j.conbuildmat.2005.12.024 ↗
32. Effect of activator type and content on properties of alkali-activated slag mortars10.1016/j.compositesb.2013.10.001 ↗
33. Iron recovery and active residue production from basic oxygen furnace (BOF) slag for supplementary cementitious materials10.1016/j.resconrec.2017.10.027 ↗
34. Systematic approach to determination of maximum achievable capture capacity via leaching and carbonation processes for alkaline steelmaking wastes in a rotating packed bed10.1021/es403323x ↗