journal article·2018-02

A nondestructive evaluation method for semi-rigid base cracking condition of asphalt pavement

Guoshuai Zang, Lijun Sun, Zhang Chen, Li Li

Publisher page

Abstract

Abstract The evaluation of semi-rigid base cracking condition is one of the most important elements of project-level pavement evaluation, and has been a key challenge facing pavement engineers for many years. This is because that the semi-rigid base cracking condition cannot be obtained through visual surveys unless the asphalt course is milled off, therefore the nondestructive detection and evaluation method is a better choice. This paper develops a nondestructive FWD-based evaluation model to evaluate the semi-rigid base cracking condition. It was found that the normalized base modulus (ratio between back-calculated and initial modulus) and the semi-rigid base cracking condition had good relationship on log-log scales, therefore the normalized base modulus was considered to be a reasonable indicator for the evaluation of semi-rigid base damage (cracking) condition. Based on the comparison of measured data and back-calculated modulus in freeway pavements, the evaluation criterion is established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Sun · 2016
2. Development of the 2002 Pavement Design Guide, Milestones 2002-Moving Towards the 2002 Pavement Design Guide, NCHRP Project 1-37A, 2000. Available at: http://www.trb.org/mepdg.
3. Zhou · 2009
4. Loria-salazar · 2008
5. Matched filtering algorithm for pavement cracking detection
6. Advances in backcalculating the mechanical properties of flexible pavements10.1016/j.advengsoft.2005.10.001 ↗
7. Performance evaluation of backcalculation algorithms through three-dimensional finite-element modeling of pavement structures
8. Spectral element technique for efficient parameter identification of layered media: I. Forward calculation10.1016/S0020-7683(00)00112-8 ↗
9. An efficient backcalculation algorithm of time domain for large-scale pavement structures using Ritz vectors10.1016/S0168-874X(02)00055-0 ↗
10. Dynamic linear back calculation of pavement material parameters10.1061/(ASCE)0733-947X(1994)120:1(109) ↗
11. Huang · 1993
12. Modified Newton algorithm for backcalculation of pavement layer properties
13. Particle swarm optimization algorithm based on the idea of simulated annealing
14. M. Hossain, S. Romanoschi, A. Gisi, Seasonal and Spatial Variation of Subgrade Response, American Society of Civil Engineers: Pavement Subgrade, Unbound Materials, and Nondestructive Testing, 2000, pp. 150–166.10.1061/40509(286)10 ↗
15. Study on the dynamic compressive resilient modulus and frost resistance of semi-rigid base materials10.1080/14680629.2017.1329856 ↗