journal article·2018-04

Improving anti-weathering performance of thermally modified wood by TiO2 sol or/and paraffin emulsion

Haiying Shen, Shaodi Zhang, Jinzhen Cao, Jun Jiang, Wang Wang

Publisher page

Abstract

Abstract The poor anti-weathering performance of thermally modified wood is always an issue that influences its appearance as well as its service life after exposure in outdoor circumstance. In this study, titania (TiO2) sol, paraffin emulsion, and their combination were used to impregnate thermally modified Scots pine (Pinus sylvestris L.) sapwood, modified at 212 °C, and then the samples were subjected to an accelerated weathering test for up to 1176 h. The time-dependent changes on surface color, gloss and water contact angle (WCA) of control and post-treated samples were investigated during the weathering process. Moreover, the chemical and morphological alterations were analyzed by attenuated total reflected Fourier transform infrared (ATR-FTIR) spectroscopy and scanning electron microscopy (SEM). The results showed that TiO2 was not resistant to water but addition of paraffin emulsion improved the adherence of TiO2 on wood surface. After post-treatment with TiO2 sol and paraffin emulsion, the anti-weathering performance of thermally modified wood improves due to the controlling of negative effects from ultraviolet and water on wood surface, respectively. The degradation of wood components decreased significantly in TiO2/paraffin treated samples, which was confirmed by the FTIR and SEM results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Cultural Heritage Materials Analysis · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Evaluation of hardness and surface quality of different wood species as function of heat treatment10.1016/j.matdes.2014.05.029 ↗
2. Investigation of the chemical modifications of beech wood lignin during heat treatment10.1016/j.polymdegradstab.2010.05.018 ↗
3. Study of the degradation behavior of heat-treated jack pine (Pinus banksiana) under artificial sunlight irradiation10.1016/j.polymdegradstab.2012.03.022 ↗
4. Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weathering10.1016/j.apsusc.2012.09.137 ↗
5. Color stability of heat-treated wood during artificial weathering10.1007/s00107-003-0389-2 ↗
6. Changes in surface and mechanical properties of heat treated wood during natural weathering10.1016/j.measurement.2014.03.018 ↗
7. Study of the effect of photo-irradiation on the surface chemistry of wood10.1016/j.polymdegradstab.2005.02.009 ↗
8. Ultrastructural changes of photodegradation of wood surfaces exposed to UV10.1515/hfsg.1991.45.5.347 ↗
9. A spectrocolorimetric and chemical study on color modification of thermally modified wood during artificial weathering10.1016/j.apsusc.2012.02.005 ↗
10. Weathering of roofing materials-an overview10.1016/j.conbuildmat.2006.10.015 ↗
11. The efficacy of photostabilizers on the color change of wood filled plastic composites10.1016/j.polymdegradstab.2005.06.024 ↗
12. Polypropylene composites with natural fibers and wood-General mechanical property profiles10.1016/j.compscitech.2011.12.013 ↗
13. Effect of photostablizers on surface color and mechanical property of wood-flour/HDPE composites after weathering10.1007/s11595-012-0516-1 ↗
14. Weathering behaviour of wood-faced construction materials10.1016/j.conbuildmat.2006.02.008 ↗
15. TiO2 photocatalysts and diamond electrodes10.1016/S0013-4686(00)00620-4 ↗
16. Cr-doped TiO2 gas sensor for exhaust NO2 monitoring10.1016/S0925-4005(03)00183-7 ↗
17. Weathering Performance of wood coated with a combination of alkoxysilanes and rutile TiO2 heirarchical nanostructures10.15376/biores.10.4.7053-7064 ↗
18. Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-TiO210.1016/j.conbuildmat.2016.03.166 ↗
19. Effect of TiO2 on UV stability of polymeric binder films used in waterborne facade paints10.1016/j.porgcoat.2015.04.002 ↗
20. Effect of TiO2 nanoparticles on the physico-mechanical and ultraviolet light barrier properties of fish gelatin/agar bilayer film10.1016/j.lwt.2016.03.011 ↗
21. Hydrothermal fabrication of rutile TiO2 submicrospheres on wood surface: an efficient method to prepare UV-protective wood10.1016/j.matchemphys.2012.01.018 ↗
22. Effect of TiO2-containing nano-coatings on the color protection of heat-treated jack pine10.1007/s11998-010-9294-x ↗
23. Sorption properties of wood impregnated with aqueous solution of boric acid and montan wax emulsion10.1002/app.33196 ↗
24. Thermal modification of Southern pine combined with wax emulsion preimpregnation: effect on hydrophobicity and dimensional stability10.1515/hf-2014-0106 ↗
25. ASTM G 154–06 · 2004
26. Color stability of weathered heat-treated teak wood