journal article·2018-09

Fatigue properties of crumb rubber asphalt mixtures used in railways

Seyed Mohammad Asgharzadeh, Javad Sadeghi, Pooneh Peivast, Makan Pedram

Publisher page

Abstract

Abstract The use of asphalt mixtures in railway tracks provides a positive contribution to the bearing capacity, stability, durability and more importantly damping properties of the railway structure particularly for the new generation of low-vibration-railway track systems. However, one of the main concerns in the use of asphalt mixtures in railways is their fatigue cracking caused by the repeated traffic loading. The present study focused on the fatigue damage behavior of asphalt mixtures in the railways through using the viscoelastic continuum damage theory. Three experiments of creep compliance, constant crosshead rate and cyclic fatigue tests were carried out on some asphalt mixtures with different air void contents and aging conditions. Based on the results obtained, the crumb rubber modification of railways asphalt mixtures at low stress levels increases the fatigue life of asphalt up to 7.2 times while this increase is at the most 3.6 for the highway asphalt mixture. Furthermore, reducing the air void content from 4% to 2% for the crumb rubber modified asphalt mixture increases the fatigue life by 9.4 times at high stress levels and 18.2 times at low stress levels, which is a great improvement. It was shown that the lowest fatigue life is obtained in the aged crumb rubber modified mixture (i.e., 20 percent of unmodified asphalt mixture).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Railway Engineering and Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Dynamic aspects of rail tracks for high-speed railways10.1080/10298436.2010.482991 ↗
2. Evaluation of asphalt concrete mixtures for railway track10.1016/j.conbuildmat.2014.09.053 ↗
3. European Asphalt Pavement Association (2003) Asphalt in Railway Tracks, www.eapa.org Accessed: August 2017.
4. Numerical determination for optimal location of sub-track asphalt layer in high-speed rails10.1007/s40534-013-0012-0 ↗
5. P.F. Teixeira, and A. Lopez-Pita. Viability of Using Bituminous Subballast Layer on High-Speed Ballasted Tracks. in: Proceedings of the BCRA2005 - International Conference on Bearing Capacity of Roads, Railways and Airfields Conference, Trondheim, Norway, 2005.
6. X. Zeng Rubber-Modified Asphalt Concrete for High-Speed Railway Roadbeds. Case Western Reserve University Department of Civil Engineering, 2005.
7. Utilization of asphalt, bituminous layers and coatings in railway trackbeds: a compendium of international applications
8. Huang, Y. H., Pavement analysis and design. 1993.
9. J.G. Rose, R.R. Souleyrette. Hot-Mix Asphalt (Bituminous) Railway Trackbeds: In-Track Tests, Evaluations, and Performances--A Global Perspective: Part I--Introduction to Asphalt Trackbeds and International Applications and Practices, 2014.10.1201/b16730-98 ↗
10. Advances in design theories of high-speed railway ballastless tracks10.1007/BF03325753 ↗
11. J.G. Rose. Test measurements and performance evaluations of in-service railway asphalt trackbeds. in: Proceedings of the Transportation Systems 2008 Workshop, 2008.
12. Momoya, Y., New Railway Roadbed Design, Railway Technology Avalanche 2007, 118.
13. J.G. Rose, L.S. Bryson. Hot mix asphalt railway trackbeds: trackbed materials, performance evaluations, and significant implications. in: Proceedings of the International Conference on Perpetual Pavements, 2009.
14. Effect of aggregate nature on the fatigue-cracking behavior of asphalt mixes10.1016/j.matdes.2012.12.048 ↗
15. J.G. Rose, P.F. Teixeira, P. Veit. International design practices, applications, and performances of asphalt/bituminous railway trackbeds. in: GEORAIL 2011—International symposium, Paris, France, 2011.
16. N. Tran, P. Turner, J. Shambley. Enhanced Compaction to Improve Durability and Extend Pavement Service Life: A Literature Review. No. NCAT Report No. 16-02, 2016.
17. J.T. Harvey J.A. Deacon B.W. Tsai C.L. Monismith Fatigue performance of asphalt concrete mixes and its relationship to asphalt concrete pavement performance in California, University of California, Berkeley, Institute of Transportation Studies, Asphalt Research Program, CAL/APT Program, 1995.
18. Influences by air voids on fatigue life of asphalt mixture based on discrete element method10.1016/j.conbuildmat.2016.09.045 ↗
19. One-dimensional constitutive modeling of asphalt concrete
20. Viscoelastic constitutive model for asphalt concrete under cyclic loading
21. Development of a simplified fatigue test and analysis procedure using a viscoelastic, continuum damage model (with discussion)
22. Time-temperature superposition principle for asphalt concrete with growing damage in tension state
23. Characterization and Performance Prediction of ALF Mixtures Using a Viscoelastoplastic Continuum Damage Model
24. Conventional and viscoelastic continuum damage (VECD)-based fatigue analysis of polymer modified asphalt pavements
25. Validation of a simplified method in viscoelastic continuum damage (VECD) model developed for flexural mode of loading10.1016/j.conbuildmat.2015.07.184 ↗
26. A viscoplastic model for the confined permanent deformation of asphalt concrete in compression10.1016/j.mechmat.2015.10.001 ↗
27. Improvements of conventional methods in railway track analysis and design10.1139/L10-010 ↗
28. Evaluation of conventional methods in Analysis and Design of Railway Track System
29. Safe distance of cultural and historical buildings from subway lines10.1016/j.soildyn.2017.02.008 ↗
30. Correspondence principles and a generalized j-integral for large deformation and fracture analysis of viscoelastic media10.1007/BF01140837 ↗
31. Kim, Y. R., Modeling of asphalt concrete. 2008.
32. A theory of crack initiation and growth in viscoelastic media10.1007/BF00034721 ↗
33. A viscoelastic continuum damage model of asphalt concrete with healing10.1061/(ASCE)0733-9399(1998)124:11(1224) ↗
34. Simplified viscoelastic continuum damage model as platform for asphalt concrete fatigue analysis10.3141/2296-04 ↗
35. Asphalt Institute, Asphalt Mix Design Methods, MS-2, 2015.
36. Effect of crumb rubber degradation on components distribution and rheological properties of Terminal Blend rubberized asphalt binder10.1016/j.conbuildmat.2017.03.229 ↗
37. CalTrans, Asphalt Rubber Usage Guide, State of California Department of Transportation, Materials Engineering and Testing Services, USA, 2003.
38. Manufacturing terminal and field bitumen-tyre rubber blends: the importance of processing conditions10.1016/j.sbspro.2012.09.899 ↗
39. CalTrans, Asphalt Rubber Usage Guide, State of California Department of Transportation, Materials Engineering and Testing Services, USA, 2006.
40. S.C. Huang, A.T. Pauli, and R.E. Robertson, Rheological changes in crumb rubber-modified asphalts with long-term aging, in Transportation Research Board, 2005: Washington D.C.
41. Comparative study of rheological behavior of modified binders for high-temperature areas10.1061/(ASCE)MT.1943-5533.0000099 ↗
42. Rheological master curves for modified asphalt binders, Scientia Irancica
43. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures10.1016/j.conbuildmat.2015.07.165 ↗
44. McGennis R. B., Evaluation of Physical Properties of Fine Crumb Rubber-Modified Asphalt Binders, Transportation Research Board 74th Annual Meeting, Washington D.C, 1995.
45. Mechanism of interaction of asphalt cement with crumb rubber modifier10.3141/1661-15 ↗
46. Production of asphalt-rubber binders by high-cure conditions10.3141/1586-07 ↗
47. Rheological characterization of terminal blend rubberized asphalt binder containing polymeric additive and Sulphur
48. The effects of base binder and styrene–butadiene–styrene structure on rutting resistance of polymer–nanocomposite asphalt mixture
49. West · 2010
50. Bahia · 2001
51. Time-temperature-age superposition validation for linear viscoelastic properties of bituminous materials10.1061/(ASCE)MT.1943-5533.0002162 ↗
52. Effects of oxidative aging on asphalt mixture properties10.3141/2296-08 ↗
53. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive10.1016/j.conbuildmat.2010.06.087 ↗
54. Methods of interconversion between linear viscoelastic material functions. Part I—A numerical method based on Prony series10.1016/S0020-7683(98)00055-9 ↗
55. Time-temperature dependency of asphalt binders—an improved model
56. Interconversion between relaxation modulus and creep compliance for viscoelastic solids10.1061/(ASCE)0899-1561(1999)11:1(76) ↗
57. Comparison of conventional, polymer, and rubber asphalt mixtures using viscoelastic continuum damage model10.1080/14680629.2014.914965 ↗
58. Sadeghi · 2012