journal article·2018-09Open access

Performance and microstructure of MgO-SiO2 concrete under different environments

C. Sonat, W.W. Teo, C. Unluer

Abstract

This study investigated the changes in the performance and microstructure of MgO-SiO2 concrete under exposure to different environments involving carbonation, NaCl, MgCl2 and MgSO4 solutions for up to 180 days. Compressive strength results were compared to Portland cement (PC)-based concrete samples subjected to the same environments. Microstructural analysis performed via FESEM, XRD and TG/DTG indicated a lack of change in the composition of MgO-SiO2 samples. The sustained mechanical performance and the clear presence of hydrate phases such as brucite and M-S-H even after longer exposures highlighted the resistance of MgO-SiO2 formulations and their potential to be utilized in structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Olivier · 2015
2. Comparative life cycle assessment of reactive MgO and Portland cement production10.1016/j.jclepro.2016.07.071 ↗
3. Recovery of reactive MgO from reject brine via the addition of NaOH10.1016/j.desal.2017.12.021 ↗
4. Synthesis of reactive MgO from reject brine via the addition of NH4OH10.1016/j.hydromet.2017.01.010 ↗
5. Recycling and reuse of reactive MgO cements – a feasibility study10.1016/j.conbuildmat.2017.09.068 ↗
6. Formation of magnesium silicate hydrate (MSH) cement pastes using sodium hexametaphosphate10.1016/j.cemconres.2014.07.001 ↗
7. Development of low pH cement systems forming magnesium silicate hydrate (MSH)10.1016/j.cemconres.2011.01.016 ↗
8. Influence of time and temperature on ageing and phases synthesis in the MgO–SiO2–H2O system10.1016/j.tca.2013.01.018 ↗
9. Role of sodium hexametaphosphate in MgO/SiO2 cement pastes10.1016/j.cemconres.2016.08.003 ↗
10. Characterization of reaction products and reaction process of MgO–SiO2–H2O system at room temperature10.1016/j.conbuildmat.2014.03.004 ↗
11. Control of drying shrinkage of magnesium silicate hydrate gel cements10.4028/www.scientific.net/KEM.709.109 ↗
12. Li · 2013
13. Performance of magnesia cements in porous blocks in acid and magnesium environments10.1680/adcr.11.00011 ↗
14. Effects of size and curing on cylinder compressive strength of normal and high-strength concrete
15. Effects of carbonation on mechanical properties and durability of concrete using accelerated testing method10.51400/2709-6998.2296 ↗
16. Carbonation of CH and C-S–H in composite cement pastes containing high amounts of BFS10.1016/j.cemconres.2009.10.020 ↗
17. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
18. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
19. Influence of magnesium sulphate concentration on durability of concrete containing micro-silica, slag and limestone powder using durability index10.1016/j.conbuildmat.2016.04.091 ↗
20. Durability of concrete exposed to leaching and external sulphate attacks10.1016/j.cemconres.2009.07.021 ↗
21. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
22. Durability of concrete – degradation phenomena involving detrimental chemical reactions10.1016/j.cemconres.2007.09.015 ↗
23. Long-term effects of magnesium chloride and other concentrated salt solutions on pavement and structural Portland cement concrete: Phase I results
24. Elemental zonation in marine concrete10.1016/j.cemconres.2016.02.006 ↗
25. Resistance of concrete and mortar against combined attack of chloride and sodium sulphate10.1016/j.cemconcomp.2014.06.013 ↗
26. Monitoring the hydration of MgO-based cement and its mixtures with Portland cement by 1H NMR relaxometry
27. Hydration of MgO/SiO2 and Portland cement mixtures: a structural investigation of the hydrated phases by means of X-ray diffraction and solid state NMR spectroscopy10.1016/j.cemconres.2017.08.029 ↗
28. Traditional Portland cement and MgO-based cement: a promising combination?10.1016/j.pce.2017.01.011 ↗
29. Magnesium and calcium silicate hydrates10.1016/j.cemconres.2015.06.007 ↗
30. Investigation of the mechanical properties of MgO-SiO2 binders
31. Strength and workability of magnesium silicate hydrate binder systems10.1016/j.conbuildmat.2016.11.109 ↗
32. The reaction mechanism between MgO and microsilica at room temperature10.1007/BF02840848 ↗
33. Strength and hydration products of reactive MgO–silica pastes10.1016/j.cemconcomp.2014.04.003 ↗
34. Hydration study of ternary blended cements containing ferronickel slag and natural pozzolan10.1016/j.conbuildmat.2015.02.046 ↗
35. Carbonated MgO concrete with improved performance: the influence of temperature and hydration agent on hydration, carbonation and strength gain10.1016/j.cemconcomp.2017.06.006 ↗
36. Influence of carbonation on the properties of reactive magnesia cement-based pressed masonry units10.1680/adcr.2008.20.2.53 ↗
37. Ultra-green construction: reactive magnesia masonry products
38. Control of drying shrinkage in magnesium silicate hydrate (m-s-h) gel mortars10.1016/j.cemconres.2016.05.011 ↗
39. Action of chloride ions on hydrated cement pastes: influence of the cement type and long time effect of the concentration of chlorides10.1016/0008-8846(92)90088-D ↗
40. Research on 3CaO·CaCl2·15H2O identified in concretes damaged by CaCl2 attack
41. Shand · 2006
42. Mehta · 2006
43. Magnesium sulfate attack on portland cement paste – II. Chemical and mineralogical analyses10.1016/0008-8846(92)90023-O ↗
44. Investigation of the performance and thermal decomposition of MgO and MgO-SiO2 formulations10.1016/j.tca.2017.07.009 ↗