The relevance of ultrafine fly ash properties and mechanical properties in its fly ash-cement gelation blocks via static pressure forming
Source abstract
Abstract
Abstract Two fly ash samples, collected from the circulating fluidized bed (CFBFA) and pulverized boiler (PCFA) were ultrafine grinded and characterized by the scanning electron microscopy (SEM), the X-ray diffractometer (XRD) and the fourier transform infrared spectroscopy (FT-IR). The characterizations revealed the ultrafine grinding of fly ash resulted in not only the increase of their specific surface areas, also the decrease of crystallinity degree and the anion polymerization degree of silicates and aluminates. In comparison to CFBFA, PCFA showed a higher anion polymerization degree of silicates and aluminates. This was followed by strength behavior studies of the fly ash-cement gelation blocks. The mixing ratio of tested fly ash and cement was 1:1 (by wt%), and the fly ashes included those before and after ultrafine grinding. The results showed that ultrafine fly ash (UFFA)-cement blocks exhibited higher compressive strength as compared to that of original fly ash (OFA)-cement blocks, especially at their early stage. Compared with PCFA, CFBFA was more significant in improvement of mechanical properties of fly ash-cement block at its early age for the gelation block. Studies on the water absorption and the thermal weight loss revealed the effectiveness of UFFA in increasing the density and producing more C-S-H in order to improve the mechanical properties in gelation blocks. Due to the difference of CFBFA and PCFA in chemical and mineral compositions, the enhancement of CFBFA in producing C-S-H was greater at its early age but lower at its late age than those of PCFA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Coal and Its By-products · Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Utilization of circulating fluidized bed fly ash in preparing non-autoclaved aerated concrete production[J]10.1016/j.conbuildmat.2013.06.033 ↗
2. Characteristics of fly ash in circulating fluidized bed boiler and its application in cement industry[J]
3. A review on the utilization of fly ash[J]10.1016/j.pecs.2009.11.003 ↗
4. Current status of comprehensive utilization of fly ash[J]10.1016/j.surfcoat.2012.09.043 ↗
5. Huang G, Study on comprehensive utilization of bulk solid waste in iron and steel industry[J]
6. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems[J]10.1016/S0008-8846(00)00213-1 ↗
7. New building materials from fly ash-based lightweight inorganic polymer[J]10.1016/j.conbuildmat.2005.06.052 ↗
8. Lime based steam autoclaved fly ash bricks[J]10.1016/j.conbuildmat.2006.01.005 ↗
9. Hydration of high-volume fly ash cement pastes[J]10.1016/S0958-9465(00)00044-5 ↗
10. Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag[J]10.1016/j.conbuildmat.2017.12.185 ↗
11. Pozzolanic reactivity of fly ash – API method and K-value10.1016/j.fuel.2006.01.034 ↗
12. The influence of air content by assessing the pozzolanic activity of fly ash by strength testing[J]10.1016/0008-8846(85)90008-0 ↗
13. A simplified model for prediction of pozzolanic characteristics of fly ash, based on chemical composition[J]10.1016/j.cemconres.2006.02.020 ↗
14. Utilization of circulating fluidized bed flyash as pozzolanic material[J]10.2174/1874149501711010176 ↗
15. Effect of circulating fluidized bed combustion ash on the properties of roller compacted concrete10.1016/j.cemconcomp.2013.10.001 ↗
16. Durability properties of high volume fly ash self compacting concretes[J]10.1016/j.cemconcomp.2008.06.011 ↗
17. Early age properties of alkali activated brown coal fly ash binders[J]10.4028/www.scientific.net/AMR.931-932.457 ↗
18. The effect of different drying techniques on the pore size distribution of blended cement mortars[J]10.1016/0008-8846(93)90183-A ↗
19. Properties of concrete containing ultra-fine fly ash[J]
20. Effect of ultrafine fly ash on the properties of concretes containing construction and demolition wastes as coarse aggregates[J]10.1002/suco.201500030 ↗
21. Some factors affecting early compressive strength of steam-curing concrete with ultrafine fly ash[J]10.1016/S0008-8846(01)00559-2 ↗
22. Characteristics of the ultrafine component of fly ash[J]10.1016/j.fuel.2006.01.028 ↗
23. Influence of ultrafine fly ash on the early age response and the shrinkage cracking potential of concrete[J]10.1061/(ASCE)0899-1561(2005)17:1(45) ↗
24. Influence of ultrafine fly ash composite on the fluidity and compressive strength of concrete[J]10.1016/S0008-8846(00)00323-9 ↗
25. Effects of ultrafine fly ash on the properties of high-strength concrete[J]10.1007/s10973-015-4567-3 ↗
26. Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortar[J]10.1016/j.conbuildmat.2013.11.002 ↗
27. Compressive strength and durability properties of high volume fly ash (HVFA) concretes containing ultrafine fly ash (UFFA)[J]10.1016/j.conbuildmat.2015.02.068 ↗
28. Effects of ultrafine fly ash on setting, strength, and porosity of geopolymers cured at room temperature[J]
29. Ultrafine grinding of fly ash with grinding aids: Impact on particle characteristics of ultrafine fly ash and properties of blended cement containing ultrafine fly ash[J]10.1016/j.conbuildmat.2015.01.025 ↗
30. Mechanical treatments of fly ashes. part III: studies on strength development of ground fly ashes (GFA) — cement mortars[J]10.1016/S0008-8846(97)00129-4 ↗
31. Effect of fly ash fineness on microstructure of blended cement paste[J]10.1016/j.conbuildmat.2005.12.024 ↗
32. Determination of percent crystallinity of partly devitrified glass by X-Ray diffraction[J]10.1111/j.1151-2916.1962.tb11114.x ↗
33. Quantitative analysis of calcite and Mg-calcite by X-ray diffraction: effect of grinding on peak height and peak area[J]10.1111/j.1365-3091.1973.tb01621.x ↗
34. Investigation of the coal fly ashes using IR spectroscopy[J]10.1016/j.saa.2014.05.052 ↗
35. FT-IR Study of the solid state polymerization of acetylene under pressure[J]10.1021/jp960306l ↗
36. Effects of Fe2O3 nanoparticles on water permeability and strength assessments of high strength self-compacting concrete[J]10.1016/S1005-0302(12)60026-7 ↗
37. N. Rozgonyi-Boissinot, T. Agárdi, Á. Karolina Cebula et al., Comparison of water absorption methods: testing the water absorption of recently quarried and weathered porous limestone on site and under laboratory conditions[C]// EGU General Assembly Conference. EGU General Assembly Conference Abstracts, 2017.
38. The use of DTA/TGA to study the effects of ground quartz with different surface areas in autoclaved cement: quartz pastes. part 1: a method for evaluating DTA/TGA results[J]10.1016/S0040-6031(96)03033-X ↗
39. The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. morphological evolution of the solid phases[J]10.1016/j.tca.2014.08.008 ↗