Experimental simulation study on pore clogging mechanism of porous pavement
Source abstract
Abstract
Abstract Permeability reduction caused by clogging is a major issue with porous concrete pavements. Particulate matter infiltration owing to rainwater, movement, and accumulation/deposition in the pores is the main cause of clogging in porous pavements. In this study, in order to observe the internal movement of particles in pores and the clogging evolution directly, we focus on the accumulation of transparent sodium polyacrylate beads instead of pervious concrete aggregate. The clogging process caused by particles in surface runoff entering the internal pores of porous concrete was studied, and a visualization method was applied to analyze the clogging process in porous media. The effects of the porous concrete porosity, horizontal runoff velocity, seepage velocity, and particle size distribution on the clogging development with time, clogging development rate, and particle distribution in the clogging state were studied using the control variable method. The results demonstrate that the clogging process exhibits four stages, namely rapid clogging, partial recovery, slow clogging, and clogging stability. The effects of porosity and clogging particle size on the clogging development rate are significant. Porous concrete porosity, seepage velocity, and clogging particle size all have impacts on the distributions of clogging particle in the final clogging process, while the horizontal runoff effect can be neglected.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Hydraulic flow and structures · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Permeable pavements: pollution management tools10.2166/wst.1995.0012 ↗
2. S. Borgwardt, Long-term in-situ infiltration performance of permeable concrete block pavement, Proceedings, 2006.
3. Experimental simulation of rapid clogging process of pervious concrete pavement caused by storm water runoff
4. Permeability reduction in pervious concretes due to clogging: experiments and modeling10.1061/(ASCE)MT.1943-5533.0000079 ↗
5. Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems10.1016/j.jenvman.2005.09.019 ↗
6. Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots10.1016/j.jenvman.2011.09.021 ↗
7. A new test method for porosity measurements of Portland cement pervious concrete10.1520/JAI12931 ↗
8. Characterizing enhanced porosity concrete using electrical impedance to predict acoustic and hydraulic performance10.1016/j.cemconres.2006.09.001 ↗
9. Physical clogging of soil filters under constant flow rate versus cons10.1139/t05-018 ↗
10. Chapter 4: Flushing flows
11. Review of permeable pavement systems10.1016/j.buildenv.2006.11.016 ↗
12. Clogging evaluation of permeable bases10.1061/(ASCE)0733-947X(2003)129:3(309) ↗
13. P.D. Tennis, M.L. Leming, D.J. Akers, Pervious concrete pavements, EB302, Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, Silver Spring, MD, 2004.
14. Internal structure evolution of asphalt mixtures during freeze-thaw cycles10.1016/j.matdes.2015.07.073 ↗
15. X-ray computed tomography in hydraulics of asphalt mixtures: procedure, accuracy, and application10.1016/j.conbuildmat.2016.01.032 ↗
16. C.F. Yong, A. Deletic, T.D. Fletcher, M.R. Grace, The clogging behaviour and treatment efficiency of a range of porous pavements, 2008.
17. Numerical study on seepage flow in pervious concrete based on 3d CT imaging10.1016/j.conbuildmat.2017.11.149 ↗