journal article·2018-11Open access

Key parameters in optimizing fibres orientation and distribution for Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)

Qiulei Song, Rui Yu, Zhonghe Shui, Xinpeng Wang, Suduan Rao, Zewen Lin, Zhe Wang

Abstract

Abstract This study addresses some key parameters in optimizing fibres distribution and orientation for Ultra-High Performance Fibre Reinforced Concrete (UHPFRC). Based on a materials efficient application point of view, a densely compacted UHPFRC cementitious matrix is designed by using the modified A&A (Andreasen & Andersen) model. Several UHPFRCs with different viscosities are produced by adjusting the proportions of silica fume to metakaolin. Then, some key influence factors are considered and studied to clarify their effect on fibres distribution and directions in UHPFRC, including concrete casting length, casting height and mixture viscosity. At last, an image analysis tool is applied for further prove the fibres orientation and distribution in the hardened UHPFRC. The obtained experimental results indicate that the fibres orientation can be strongly affected by the UHPFRC casting length, casting height and the mixture viscosity. The optimized fibre orientation can be obtained when the UHPFRC with 1000 mm length, 150 mm cast length and 4.409 pa·s viscosity. Moreover, compared to the effect of casting length and mixture viscosity, the casting height is more important to produce a homogeneous UHPFRC with optimized fibre distribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Advanced ceramic materials synthesis · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Development of the mechanical properties of an Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2006.03.009 ↗
2. Hydration and microstructure of ultra-high performance concrete incorporating rice husk ash10.1016/j.cemconres.2011.06.009 ↗
3. AFGC · 2013 · 358
4. Performance assessment and design of ultra-high performance concrete (UHPC) structures incorporating life-cycle cost and environmental impacts10.1016/j.conbuildmat.2018.02.037 ↗
5. Effect of shrinkage reducing admixture on tensile and flexural behaviors of UHPFRC considering fiber distribution characteristics10.1016/j.cemconres.2013.09.006 ↗
6. Flexural behavior of reinforced concrete beams repaired with ultra-high performance fiber reinforced concrete (UHPFRC)10.1016/j.compstruct.2016.09.010 ↗
7. Flexural strengthening of RC beams with prefabricated ultra high performance fibre reinforced concrete laminates10.1016/j.engstruct.2017.08.048 ↗
8. Size effect in ultra-high-performance concrete beams10.1016/j.engfracmech.2016.02.009 ↗
9. Effects of steel fibre content and shape on mechanical properties of ultra-high performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
10. Response of Thin UHPFRC Targets with Various Fibre Volume Fractions to Deformable Projectile Impact10.1016/j.proeng.2017.06.179 ↗
11. Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): experiments and modeling10.1016/j.conbuildmat.2014.06.033 ↗
12. Fiber distribution and orientation in UHP-FRC beams and their effect on backward analysis10.1617/s11527-013-0153-y ↗
13. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading10.1016/j.cemconcomp.2013.12.015 ↗
14. Effect of fiber orientation on the in-plane tensile response of UHPFRC reinforcement layers10.1016/j.cemconcomp.2016.01.001 ↗
15. Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete10.1016/j.conbuildmat.2017.07.130 ↗
16. Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution10.1016/j.conbuildmat.2011.07.003 ↗
17. Development of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): towards an efficient utilization of binders and fibres10.1016/j.conbuildmat.2015.01.050 ↗
18. Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heart curing10.1617/s11527-011-9767-0 ↗
19. Influence of fibre orientation on the tensile behaviour of ultra-high performance fibre reinforced cementitious composites10.1016/j.cemconres.2017.03.007 ↗
20. Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers10.1016/j.conbuildmat.2017.06.018 ↗
21. Estimation of the tensile strength of UHPFRC layers based on non-destructive assessment of the fibre content and orientation10.1016/j.cemconcomp.2017.07.019 ↗
22. Improvement in Predicting the Post-Cracking Tensile Behavior of Ultra-High Performance Cementitious Composites Based on Fiber Orientation Distribution10.3390/ma9100829 ↗
23. Effect of fiber orientation on the rate-dependent flexural behavior of ultra-high-performance fiber-reinforced concrete10.1016/j.compstruct.2016.08.023 ↗
24. Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar10.1016/j.compositesb.2017.02.019 ↗
25. Prediction of Tensile Behavior of UHSFRC Considering the Flow Field in the Placing Dominated by Shear Flow10.3390/ma11020194 ↗
26. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC10.1016/j.conbuildmat.2017.03.173 ↗
27. Optimization of fibre orientation and distribution for a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): experiments and mechanism analysis10.1016/j.conbuildmat.2018.02.130 ↗
29. Influence of flowability, casting time and formwork geometry on fiber orientation and mechanical properties of UHPFRC10.1016/j.cemconres.2017.02.017 ↗
30. Relationship between fiber orientation/distribution and post-cracking behaviour in ultra-high-performance fiber-reinforced concrete (UHPFRC)10.1016/j.cemconcomp.2017.07.007 ↗
31. Sustainable development of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Towards to an optimized concrete matrix and efficient fibre application10.1016/j.jclepro.2017.06.017 ↗
32. Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC10.1016/j.conbuildmat.2014.04.007 ↗
33. Fiber orientation during casting of UHPFRC: electrical resistivity measurements, image analysis and numerical simulations10.1617/s11527-013-0205-3 ↗
34. The variation of flow-dependent tensile behavior in radial flow dominant placing of Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC)10.1016/j.conbuildmat.2012.01.006 ↗
35. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
36. The relation between fiber orientation and tensile behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC)10.1016/j.cemconres.2011.05.009 ↗
37. Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength10.1617/s11527-009-9562-3 ↗
38. Effect of beam size, casting method, and support conditions on flexural behavior of ultra-high-performance fiber-reinforced concrete
39. Dynamic strength and ductility of ultra-high performance concrete with flow-induced fiber alignment10.1016/j.ijimpeng.2017.08.009 ↗
40. Self-compacting concrete: theoretical and experimental study10.1016/j.cemconres.2005.06.002 ↗
41. Hüsken · 2010
42. M. Hunger. An integral design concept for ecological self-compacting concrete. PhD thesis. Eindhoven University of Technology, Eindhoven, the Netherlands, 2010.
43. Mix design and properties assessment of Ultra- High Performance Fibre Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
44. Dynamic performance of a sustainable Ultra- High Performance Fibre Reinforced Concrete (UHPFRC) under pendulum impact loadings10.1016/j.conbuildmat.2015.12.157 ↗
45. Fracture mechanics of polyolefin fibre reinforced concrete: study of the influence of the concrete properties, casting procedures, the fibre length and specimen size10.1016/j.engfracmech.2015.12.032 ↗
46. Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash10.1016/j.conbuildmat.2017.04.158 ↗
47. Reorientation of short steel fibres during the flow of self-compacting concrete mix and determination of the fibre orientation factor10.1016/j.cemconres.2013.10.002 ↗
48. Grünewald · 2004
49. A novel Self-Compacting Ultra-High Performance Fibre Reinforced Concrete (SCUHPFRC) derived from compounded high-active powders10.1016/j.conbuildmat.2017.10.059 ↗
50. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗