Structural behavior of hybrid CFRP/steel bolted staggered joints
Source abstract
Abstract
Abstract Although the staggered arrangement in bolted connections can offer an efficient area usage especially for narrow members, it has the most complex stress fields. In this paper, experimental tests were performed to identify the initial stiffness of the bolted staggered joints. A 3D finite element model was developed to analyze single and double lapped bolted composite plates. The current modeling technique was validated by comparing its results against earlier experimental and numerical findings. Different bolt arrangements, including the staggered arrangement, were examined and combined with other parameters such as number of bolts, clamping force, and friction coefficient. Experimental tests showed that the double lapped joints have a higher stiffness than that of the single lapped joints. The numerical results showed that in the absence of clamping force, part of the load was transferred by friction due to the effect of secondary stresses, which can be increased by increasing the friction coefficient. Furthermore, the staggered patterns produced horizontal forces that could cause cracks in the composite material if it was not taken into consideration during the composite laminates design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Combined in-plane and through-the-thickness analysis for failure prediction of bolted composite joints
2. A progressive damage model for mechanically fastened joints in composite laminates10.1177/002199839903302402 ↗
3. Failure mechanisms in bolted CFRP10.1177/073168449801700302 ↗
4. The response of composite joints with bolt-clamping loads, Part I: Model development10.1177/0021998302036001301 ↗
5. Effect of washer size and tightening torque on the performance of bolted joints in composite structures10.1016/j.compstruct.2005.02.004 ↗
6. Bearing stiffness of glass fibre-reinforced polyester: influence of coupon geometry and laminate properties10.1016/S0263-8223(02)00039-9 ↗
7. Effects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates10.1016/S0263-8223(01)00005-8 ↗
8. The response of composite joints with bolt-clamping loads, Part II: Model verification10.1177/0021998302036001302 ↗
9. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I—model development and validation10.1016/j.compstruct.2004.09.024 ↗
10. Size effects and thickness constraints in composite joints10.1177/002199803036278 ↗
11. Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material10.1016/0263-8223(95)00071-2 ↗
12. Optimum bolted joints for hybrid composite materials10.1016/S0263-8223(98)80014-7 ↗
13. An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates10.1016/j.compscitech.2003.11.005 ↗
14. Bearing strength of carbon epoxy laminates under static and dynamic loading10.1016/j.compstruct.2004.02.007 ↗
15. Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints10.1016/S0266-3538(02)00088-X ↗
16. Experimental study on effects of clearance on single bolt, single shear, composite bolted joints10.1179/146580102225006521 ↗
17. Bearing behavior of mechanically fastened joints in composite laminates-Part I: strength and local strains10.1080/15376490306740 ↗
18. Effect of clamping force and friction coefficient on stress intensity factor of cracked lapped joints10.1016/j.engfailanal.2011.05.015 ↗
19. Stress analysis of multi-bolted joints for FRP pultruded composite structures10.1016/j.compstruct.2012.06.017 ↗
20. Static and high-rate loading of single and multi-bolt carbon-epoxy aircraft fuselage joints10.1016/j.compositesa.2013.05.006 ↗
21. Quasi-static bearing failure of CFRP composite in biaxially loaded bolted joints10.1016/j.compstruct.2015.01.038 ↗
22. S. Kanchidurai, P. Vivek, Experimental investigation on different patterned bolted/welded structural connection in steel and GFRP plates, in: IOP Conf. Ser. Earth Environ. Sci., 2017. doi: 10.1088/1755-1315/80/1/012032.10.1088/1755-1315/80/1/012032 ↗
23. A study on the strength improvement of the multi-bolted joint10.1016/j.compstruct.2013.09.047 ↗
24. Failure behavior of composite laminates with multi-pin loaded holes10.1177/0731684408097758 ↗
25. Experimental and numerical study of the parameters controlling the behavior of double-lap connections of steel plates bolted to hybrid FRP strips10.1016/j.tws.2018.01.018 ↗
26. A composite double-lap joint with staggered bolts: An experimental and analytical investigation10.1016/S0263-8223(01)00064-2 ↗
27. Study on the pin-load distribution of multiple-bolted composite to metal joints10.4028/www.scientific.net/KEM.525-526.285 ↗
28. Introduction to composite materials design
29. Formulas for the stiffness of composites with periodic microstructure10.1016/0020-7683(94)90060-4 ↗
30. ASTM standard D638−10, Standard Test Method for Tensile Properties of Plastics, Annu. B. ASTM Stand. (2010).
31. I. ANSYS, ANSYS Release 18.1 Documentation, 2017.
32. Analytical and experimental evaluation of flexural behavior of FRP pultruded composite profiles for bridge deck structural design10.1016/j.conbuildmat.2017.05.212 ↗
33. Experimental and numerical investigation on in-plane compression and shear performance of a pultruded GFRP composite bridge deck10.1016/j.compstruct.2017.08.066 ↗
34. Mosallam · 2011
35. Efficient 3D modeling of damage in composite materials
36. Behaviors of a cracked lapped joint under mixed mode loading10.1016/j.engfailanal.2013.09.005 ↗
37. Finite element analysis of effects of clearance on single shear composite bolted joints10.1179/146580103225001390 ↗
38. ASTM International, Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates, Annu. B. ASTM Stand. i (2013) 1–18. doi: 10.1520/D5961.