Waste-based geopolymeric mortars with very high moisture buffering capacity
Source abstract
Abstract
Abstract In this study, lightweight waste-based geopolymeric mortars were evaluated for the first time regarding their potential to passively adjust indoor relative humidity (RH) levels. Geopolymer mortars were prepared using a mixture of fly ash (FA) and metakaolin (MK) as a binder, in a proportion of 75:25 wt% (FA:MK), construction and demolition waste as the fine aggregate and a pore forming agent in varying amounts. The results showed that the addition of a pore-forming agent to the compositions considerably increased the moisture buffer value (MBV) of the mortars, that is, from 0.80 (reference mortar) to 5.61 g/m2 Δ%RH (mortar with highest porosity). The moisture buffering capacity shown by these eco-friendly mortars is higher than values reported for other binder materials and can be classified as excellent (MBV > 2 g/m2 Δ%RH). The porous FA-based mortars also presented low thermal conductivity (as low as 0.19 W/m∙K), which suggests that these innovative binders could be simultaneously used for indoor moisture buffering and as low thermal conductivity materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Practical moisture buffering effect of three hygroscopic materials in real-world conditions10.1016/j.enbuild.2017.01.021 ↗
2. Moisture buffering “active” devices for indoor humidity control: preliminary experimental evaluations10.1016/j.egypro.2014.12.365 ↗
3. Design and performance assessment of building counter-walls integrating Moisture Buffering “active” devices10.1016/j.egypro.2017.09.652 ↗
4. Moisture buffer value of building materials10.1520/JAI100369 ↗
5. Effect of initial conditions, boundary conditions and thickness on the moisture buffering capacity of spruce plywood10.1016/j.enbuild.2006.03.024 ↗
6. Moisture buffering capacity of heavy timber structures directly exposed to an indoor climate: a numerical study10.1016/j.buildenv.2004.10.017 ↗
7. Contribution of indoor exposed massive wood to a good indoor climate: in situ measurement campaign10.1016/j.enbuild.2003.12.003 ↗
8. The influence of porogene additives on the properties of mortars used to control the ambient moisture10.1016/j.enbuild.2014.01.016 ↗
9. Development of mortars containing superabsorbent polymer10.1016/j.conbuildmat.2015.07.173 ↗
10. Development of porogene-containing mortars for levelling the indoor ambient moisture10.1016/j.ceramint.2014.07.010 ↗
11. T.I.M. Padfield, Humidity buffering of interior spaces by porous, absorbent insulation by porous, absorbent insulation. 19 , 1999.
12. Moisture buffer performance of a fully furnished room
13. Assessment of the single and combined effect of superabsorbent particles and porogenic agents in nanotitania-containing mortars10.1016/j.enbuild.2016.06.048 ↗
14. Influence of binders and aggregates on VOCs adsorption and moisture buffering activity of mortars for indoor applications10.1016/j.cemconcomp.2014.11.013 ↗
15. Effect of biomass waste materials as unconventional aggregates in multifunctional mortars for indoor application10.1016/j.proeng.2016.08.724 ↗
16. Environmental impact of cement production: detail of the different processes and cement plant variability evaluation10.1016/j.jclepro.2009.12.014 ↗
17. Novel porous fly ash-containing geopolymers for pH buffering applications10.1016/j.jclepro.2016.02.114 ↗
18. Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters10.1016/j.jclepro.2017.10.078 ↗
19. Waste glass from end-of-life fluorescent lamps as raw material in geopolymers10.1016/j.wasman.2016.04.003 ↗
20. Porous geopolymer spheres as novel pH buffering materials10.1016/j.jclepro.2016.12.008 ↗
21. LER 1701 · 2004
22. Directive 2008/98/EC, Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives - Official J. Eur. Union - L.312/3. , 2008.
23. Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers10.1016/j.matdes.2016.07.039 ↗
24. ASTM C518-04 · 2010
25. NP EN 1015-18, Methods of test for mortar for masonry—part 18: determination of water absorption coefficient due to capillary action of hardened mortar, 1999.
26. ISO 24353, Hygrothermal performance of building materials and products- Determination of moisture adsorption/desorption properties in response to humidity variation, 2008.
27. Development of multifunctional plaster using nano-TiO 2 and distinct particle size cellulose fibers
28. On a theory of the van der waals adsorption of gases10.1021/ja01864a025 ↗
29. Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents10.1016/j.matchar.2016.01.019 ↗
30. Functionalization of mortars for controlling the indoor ambient of buildings10.1016/j.enbuild.2013.11.064 ↗
31. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
32. Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence10.1016/j.cemconres.2014.06.004 ↗
33. Porous biomass fly ash-based geopolymers with tailored thermal conductivity10.1016/j.jclepro.2016.01.083 ↗
34. Influence of water and aluminium powder content on the properties of waste-containing geopolymer foams10.1016/j.ceramint.2018.01.009 ↗