journal article·2019-02

Comparative study of oil palm trunk and rice husk as fillers in gypsum composite for building material

Mohd Ezwan Selamat, Rokiah Hashim, Othman Sulaiman, Mohamad Haafiz Mohamad Kassim, Nur Izzaati Saharudin, Owolabi Folahan Abdulwahab Taiwo

Publisher page

Abstract

Abstract The physico-chemical analysis of bark-free oil palm trunk (OPT) in comparison with rice husk (RH) was evaluated for their suitability in building construction. The results showed insignificant differences in both chemical and proximate analysis of the two fillers. The optimum value for flexural and nail-pull hardness test was at 20% OPT loading. The OPT mixed gypsum composite shows good thermal stability suitable to be used as a new type of filler for the reinforcement of gypsum composite. The limitation however is its hygroscopic properties that might affects the dimensional stability of gypsum composite when contact with water.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Plaster composites modified morphology with enhanced compressive strength and water resistance characteristics10.1016/j.conbuildmat.2018.01.165 ↗
2. Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers10.1016/j.conbuildmat.2017.12.168 ↗
3. Study of modified gypsum binder10.1016/j.conbuildmat.2017.05.140 ↗
4. Study of construction convergence technology for performance improvement in functional building materials10.1016/j.jobe.2017.04.008 ↗
5. Sagnak · 2018
6. Plant fibre based bio-composites: sustainable and renewable green materials10.1016/j.rser.2017.05.094 ↗
7. Investigation of waste paper cellulosic fibers utilization into cement based building materials10.3390/buildings8030043 ↗
8. Palm kernel fruit fiber reinforced gypsum-cement based wall panels: it’s physical and mechanical characteristics
9. Hybrid thermoplastic composites using nonwood plant fibers10.1016/B978-0-08-100787-7.00002-0 ↗
10. A critical review on the performance of Portland cement concrete with recycled organic components10.1016/j.jclepro.2018.03.244 ↗
11. An overview of the oil palm industry in Malaysia and its waste utilization through thermochemical conversion, specifically via liquefaction10.1016/j.rser.2015.05.085 ↗
12. Oil palm–community conflict mapping in Indonesia: a case for better community liaison in planning for development initiatives10.1016/j.apgeog.2016.10.005 ↗
13. Cellulose nanocrystals isolated from oil palm trunk10.1016/j.carbpol.2015.03.043 ↗
14. Isolation and characterization of cellulose nanocrystals from parenchyma and vascular bundle of oil palm trunk (Elaeis guineensis)10.1016/j.carbpol.2015.08.017 ↗
15. Properties of binderless particleboard and particleboard with addition of urea formaldehyde made from oil palm trunk waste10.21315/jps2017.28.3.10 ↗
16. Cementitious composites reinforced with natural fibres
17. TAPPI Standard T 204 om-88:1994 · 1994
18. L.E. Wise et al., Paper Trade J., 122, No. 2, Tappi, Section, 11, 1946.
19. TAPPI Standard T 203 om-93:1994 · 1994
20. TAPPI 222 Om-98:1999 · 1999
21. Experimental thermal properties characterization of insulating cork–gypsum composite10.1016/j.conbuildmat.2013.12.076 ↗
22. Rice husk ash as a renewable source for the production of zeolite NaY and its characterization10.1016/j.arabjc.2012.12.013 ↗
23. Chemical composition and functional properties of starch extracted from the pejibaye fruit (Bactris gasepaes Kunth.)10.4025/actascitechnol.v37i1.20740 ↗
24. ISO 6647:2011, International Organisation for Standardisation, ISO/DIS 6647-2-Rice, Determination of Amylose Content – Part 2: Routine Methods, 2011, p. 10.
25. Characterisation of chemical composition and energy content of green waste and municipal solid waste from Greater Brisbane, Australia10.1016/j.wasman.2015.03.039 ↗
26. Biodiesel production from Scenedesmus bijuga grown in anaerobically digested food wastewater effluent10.1016/j.biortech.2014.10.090 ↗
27. The protein content of seaweeds: a universal nitrogen-to-protein conversion factor of five10.1007/s10811-015-0650-1 ↗
28. ASTM C191-13:2013 · 2013
29. ASTM C473-15:2015, Standard Test Method for Physical Testing of Gypsum Panel Products, 2015.
30. ASTM D 2863:2008 · 2008
31. Effect of wood particle treatment on the properties of gypsum plaster pastes and composites10.1590/s1517-707620160004.0095 ↗
32. Correlation between chemical composition of tropical hardwoods and wood–cement compatibility10.1080/02773813.2017.1355390 ↗
33. Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga pinnata)10.1016/j.carbpol.2017.11.045 ↗
34. Palm Oil Facts and Figures, Simedarby, 2014. (accessed 20.12.2015).
35. Elucidating the effect of water-to-cement ratio on the hydration mechanisms of cement10.1021/acsomega.8b00097 ↗
36. Effect of wood/gypsum ratio and density on strength properties of gypsum-bonded particleboard from oil palm stems
37. Influence of wood extractives on hardening of gypsum plaster and on the manufacture of gypsum-bonded particleboards10.1007/BF02607815 ↗
38. The influence of cellulose derivatives on water structure in gypsum10.1016/j.conbuildmat.2017.11.062 ↗
39. Halogenated flame retardants
40. Nanocomposites: a revolutionary new flame retardant approach