Hydrothermal aging of bio-based poly(lactic acid) (PLA) wood polymer composites: Studies on sorption behavior, morphology, and heat conductance
Source abstract
Abstract
Abstract This work examines the moisture sorption, the morphology, and the thermal conductivity of fully bio-based composites, namely wood flour (WF) filled poly(lactic acid) (PLA), to better understand hydrothermal deterioration and potential for long-term application. Composites containing varying WF content (0%, 10%, and 30% filler by weight) were conditioned in either a fully submerged state or a fully desiccated state at four temperatures: (a) 7 °C, (b) 25 °C, (c) 35 °C, and (d) 47 °C. Results indicate that an increase in temperature typically corresponded to an increase in the rate of moisture uptake and percent crystallinity. Higher fiber contents also typically resulted in an increase in the rate of moisture uptake and thermal conductivity. Signs of deterioration, such as cracking at low temperatures and discoloration at high temperatures were noticed for these composites. Environmental impact assessments suggest the desired application and environmental exposures for these bio-based composites could drive constituents used. While the ease of production and the popularity of PLA facilitate the potential use of PLA WPCs, these composites would be expected to exhibit deterioration under high moisture conditions even at ambient temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Present and future development in plastics from biomass10.1002/bbb.189 ↗
2. Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites10.1016/j.mechmat.2014.09.009 ↗
3. PLA based biopolymer reinforced with natural fibre: a review10.1007/s10924-011-0320-6 ↗
4. Municipal solid waste as a source of lignocellulosic fiber and plastic for composite industries10.1080/03602550802188565 ↗
5. Life cycle assessment of ACQ-treated lumber with comparison to wood plastic composite decking10.1016/j.jclepro.2010.12.004 ↗
6. Biocomposites: technology, environmental credentials and market forces10.1002/jsfa.2558 ↗
7. Are natural fiber composites environmentally superior to glass fiber reinforced composites?10.1016/j.compositesa.2003.09.016 ↗
8. Life cycle assessment on polylactide-based wood plastic composites toughened with polyhydroxyalkanoates10.1016/j.jclepro.2013.11.074 ↗
9. Bayer · 2017 · 115
10. Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation10.1016/j.compscitech.2006.11.009 ↗
11. Modeling the kinetics of water transport and hydroexpansion in a lignocellulose-reinforced bacterial copolyester10.1016/j.polymer.2012.03.036 ↗
12. D. J. Sawyer, Bioprocessing–no longer a field of dreams. pp. 271-282.10.1002/masy.200351130 ↗
13. On the use of PLA-PHB blends for sustainable food packaging applications10.3390/ma10091008 ↗
14. Aliphatic polyesters: great degradable polymers that cannot do everything10.1021/bm0494702 ↗
15. Improving interfacial adhesion in pla/wood biocomposites10.1016/j.compscitech.2013.09.009 ↗
16. Characterization of the interface between cellulosic fibers and a thermoplastic matrix10.1163/156855494X00319 ↗
17. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites10.1016/j.compscitech.2006.06.019 ↗
18. An analytical model for predicting the freeze–thaw durability of wood–fiber composites10.1016/j.compositesb.2014.10.015 ↗
19. Swelling and thermal conductivity of wood and wood-plastic composite10.1080/03602559708000613 ↗
20. Characterization of poly-hydroxybutyrate films and hemp fiber reinforced composites exposed to accelerated weathering10.1016/j.polymdegradstab.2012.03.040 ↗
21. Characterizing the effects of ambient aging on the mechanical and physical properties of two commercially available bacterial thermoplastics10.1016/j.polymdegradstab.2012.04.011 ↗
22. A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption10.1080/14658011.2017.1298550 ↗
23. PLA/wood biocomposites: Improving composite strength by chemical treatment of the fibers10.1016/j.compositesa.2013.06.003 ↗
24. Mechanical and degradation properties of natural fiber-reinforced PLA composites: Jute, sisal, and elephant grass10.1002/pc.24041 ↗
25. Microbial production of lactate-containing polyesters10.1111/1751-7915.12066 ↗
26. A non-isothermal healing model for strength and toughness of fusion bonded joints of amorphous thermoplastics10.1002/pen.760312406 ↗
27. The processing science of thermoplastic structural composites10.3139/217.870157 ↗
28. The experience of thermoplastic structural composites during processing10.1016/0956-7143(91)90142-4 ↗
29. 3D printing of polymer matrix composites: A review and prospective10.1016/j.compositesb.2016.11.034 ↗
30. Nonisothermal healing and interlaminar bond strength evolution during thermoplastic matrix composites processing10.1002/pc.10027 ↗
31. Effect of environmental conditions on the mechanical properties and fungal degradation of polycaprolactone/microcrystalline cellulose/wood flour composites10.15376/biores.8.3.3322-3335 ↗
32. A micromechanical model for moisture-induced deterioration in fully biorenewable wood–plastic composites10.1016/j.compositesa.2013.02.001 ↗
33. Moisture uptake and hygroexpansion of wood fiber composite materials with polylactide and polypropylene matrix materials10.1002/pc.20753 ↗
34. Moisture sorption, biological durability, and mechanical performance of WPC containing modified wood and polylactates10.15376/biores.7.4.4575-4585 ↗
35. Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers10.1007/s12221-017-7123-x ↗
36. Effect of wood species on water sorption and durability of wood-plastic composites
37. Effect of extractives on water sorption and durability of wood-plastic composites
38. Characterizing water sorption and diffusion properties of wood/plastic composites as a function of formulation design10.1016/j.conbuildmat.2016.12.120 ↗
39. A preliminary study on the thermal conductivity and flammability of WPC based on some tropical woods
40. Consolidation process boundaries of the degradation of mechanical properties in compression moulding of natural-fibre bio-polymer composites10.1016/j.polymdegradstab.2017.03.004 ↗
41. S. Ray, and R. P. Cooney, Thermal degradation of polymer and polymer composites, Handbook of Environmental Degradation of Materials (Third Edition), pp. 185-206: Elsevier, 2018.10.1016/B978-0-323-52472-8.00009-5 ↗
42. A study on thermal degradation kinetics and flammability properties of poly (lactic acid)/banana fiber/nanoclay hybrid bionanocomposites10.1002/pc.23779 ↗
43. Effect of glycerol introduced into PLA based composites on the UV weathering behavior10.1016/j.conbuildmat.2017.03.209 ↗
44. UV protective poly (lactic acid)/rosin films for sustainable packaging10.1016/j.ijbiomac.2017.01.152 ↗
45. The UV aging properties of maleic anhydride esterified starch/polylactic acid composites10.1007/s11595-017-1698-3 ↗
46. Abiotic and biotic environmental degradation of the bioplastic polymer poly (lactic acid): a review10.1016/j.polymdegradstab.2017.01.009 ↗
47. Biodegradation behavior and modelling of soil burial effect on degradation rate of PLA blended with starch and wood flour10.1016/j.colsurfb.2017.08.056 ↗
48. Nanofiller reinforced biodegradable PLA/PHA composites: current status and future trends10.3390/polym10050505 ↗
49. ASTM. D570, Standard Test Method for Water Absorption of Plastics, American Society for Testing of Materials, 2010.
50. Characterization of the thermal properties of PLA fibers by modulated differential scanning calorimetry10.1016/j.polymer.2005.10.027 ↗
51. Influence of hygrothermal ageing on the physico-mechanical properties of alkali treated industrial hemp fibre reinforced polylactic acid composites10.1007/s10924-010-0225-9 ↗
52. Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties10.1016/j.compositesa.2004.04.004 ↗
53. Interplay between hydrophilicity and surface barriers on water transport in zeolite membranes10.1038/ncomms12762 ↗
54. Effect of durability treatment on moisture sorption properties of wood-plastic composites10.15376/biores.9.4.6397-6407 ↗
55. P. Forster, V. Ramaswamy, P. Artaxo, T. Berntsen, R. Betts, D. W. Fahey, J. Haywood, J. Lean, D. C. Lowe, and G. Myhre, Changes in atmospheric constituents and in radiative forcing. Chapter 2, Climate Change 2007. The Physical Science Basis, 2007.
56. Solomon · 2007
57. M. Goedkoop, A damage oriented method for life cycle impact assessment, The Eco-indicator 99, 1999.
58. NREL, U.S. Life Cycle Inventory Database, 2012. [Online]. Available: https://www.lcacommons.gov/nrel/search. [Accessed: 7-12-2017].
59. F. Werner, H.-J. Althaus, T. Künniger, K. Richter, and N. Jungbluth, Life cycle inventories of wood as fuel and construction material, Final report ecoinvent data v2. 0 No, vol. 9, 2007.
60. Integrating durability-based service-life predictions with environmental impact assessments of natural fiber–reinforced composite materials10.1016/j.resconrec.2015.04.004 ↗
61. Ashby · 2012
62. Application of multi-criteria material selection techniques to constituent refinement in biobased composites10.1016/j.matdes.2013.06.046 ↗
63. Comparison indices for design and proportioning of concrete mixtures taking environmental impacts into account10.1016/j.cemconcomp.2016.02.002 ↗
64. Physical changes of poly (lactic acid) induced by water sorption10.1063/1.4937344 ↗
65. Effects of water sorption on poly (lactic acid)10.1016/j.polymer.2016.07.008 ↗
66. Aging of toughened polylactic acid nanocomposites: water absorption, hygrothermal degradation and soil burial analysis10.1007/s10924-011-0338-9 ↗
67. Mechanical and thermal properties of poly (lactic acid) composites with rice straw fiber modified by poly (butyl acrylate)10.1016/j.cej.2010.11.039 ↗
68. Modeling of water diffusion mechanism in polypropylene/date palm fiber composite materials10.1177/0021998317752228 ↗
69. Effect of fiber loading on mechanical and water absorption capacity of Polylactic acid/Polyhydroxybutyrate-co-hydroxyhexanoate/Kenaf composite
70. Polymer matrix influence on stability of wood polymer composites10.1002/pat.3535 ↗
71. DSC study of biodegradable poly (lactic acid) and poly (hydroxy ester ether) blends10.1016/S0040-6031(03)00252-1 ↗
72. Improving mechanical performance of injection molded PLA by controlling crystallinity10.1002/app.27261 ↗
73. Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites10.1016/j.compositesa.2010.12.004 ↗
74. Highly crystallized poly (lactic acid) under high pressure10.1063/1.4769351 ↗
75. Crystallization kinetics of polyethylene terephthalate. I. Isothermal crystallization from the melt10.1002/app.1987.070340107 ↗