journal article·2019-08

Abrasion and impact resistance of concrete before and after exposure to freezing and thawing cycles

Mohamed K. Ismail, Assem A.A. Hassan

Publisher page

Abstract

Abstract This study evaluated the abrasion and impact resistance of a number of self-consolidating and vibrated concretes before and after exposure to freezing and thawing cycles in the presence of de-icing salts (salt scaling). The study investigated the effects of supplementary cementing materials (fly ash (FA), slag (SL), silica fume (SF), and metakaolin (MK)), binder contents (250 kg/m3 and 500 kg/m3), coarse aggregate size (10 mm and 20 mm), and coarse-to-fine (C/F) aggregate ratio (0.7 and 2). Around 32.5% extra average scaling damage was observed in the specimens that were exposed to abrasion before freezing and thawing compared to non-abraded specimens exposed to freezing and thawing. In addition, the pre-exposure to freezing and thawing cycles significantly reduced the impact and abrasion resistance, especially in concrete with low binder content and concrete with high C/F aggregate ratio. Concretes with SF and/or MK showed the highest resistance to abrasion and impact loading (before and after the exposure to salt scaling) while concrete with FA showed the lowest resistance. The results also indicated that using higher C/F aggregate ratio decreased the resistance of concrete to freezing and thawing and impact loading while no significant effect was observed when the coarse aggregate size was changed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Sutter, L.; Peterson, K.; Julio-Betancourt, G.; Hooton, D.; Vam Dam, T.; and Smith, K., “The Deleterious Chemical Effects of Concentrated Deicing Solutions on Portland Cement Concrete,” Final report for the South Dakota Department of Transportation, April 2008.
2. Durability properties of non-air entrained roller compacted concrete pavement containing coal waste ash in presence of de-icing salts10.1016/j.coldregions.2017.02.006 ↗
3. Salt scaling resistance – the effect of curing and pre-saturation10.1016/j.conbuildmat.2011.06.058 ↗
4. Abrasion resistance of concrete – design, construction and case study
5. Reinforced concrete members under drop-weight impacts10.1680/stbu.2009.162.1.45 ↗
6. Impact resistance and acoustic absorption capacity of self-consolidating rubberized concrete
7. Impact resistance and mechanical properties of self-consolidating rubberized concrete reinforced with steel fibers10.1061/(ASCE)MT.1943-5533.0001731 ↗
8. Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing and alkali-silica reactivity
9. Deicer salt-scaling resistance of non-air-entrained roller-compacted concrete pavements10.1016/j.conbuildmat.2010.10.004 ↗
10. Effect of metakaolin and silica fume on the durability of self-consolidating concrete10.1016/j.cemconcomp.2012.02.013 ↗
11. Abrasion resistance of fine aggregate replaced silica fume concrete
12. Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test10.1016/j.conbuildmat.2016.09.117 ↗
13. “A Preliminary Study on the Effect of Fine Aggregate Replacement with Metakaolin on Strength and Abrasion Resistance of Concrete”10.1016/j.conbuildmat.2013.03.038 ↗
14. Bilodeau · 1991 · 201
15. Bilodeau · 1992 · 319
16. Abrasion resistance and mechanical properties of high-volume fly ash concrete10.1617/s11527-009-9523-x ↗
17. Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test10.1016/j.conbuildmat.2016.09.117 ↗
18. G.G. Carette, A. Bilodeau, R. Cheurier and V. M. Malhotra, “Mechanical Properties of Concrete Incorporating High Volumes of Fly Ash From Sources In The US,” In: Supplementary proceedings of the CANMET/ACI fourth international conference on the use of fly ash, silica fume, slag, and natural pozzolans in concrete, EPRI Report No. TR-100577, 1992, pp. 1–33.
19. Durability of ternary blend concrete with silica fume and blast-furnace slag: laboratory and outdoor exposure site studies
20. Multi-variable statistical analysis for scaling resistance of concrete containing GGBFS10.1016/j.cemconcomp.2006.08.002 ↗
21. Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days10.1016/j.cemconcomp.2007.09.003 ↗
22. Abrasion resistance and mechanical properties of roller compacted concrete with GGBS10.1016/j.conbuildmat.2016.04.004 ↗
23. Characterisation of damage due to abrasion In SCC by acoustic emission analysis10.1680/jmacr.17.00445 ↗
24. Deterioration of aggregates-the underlying cause
25. Abrasion resistance of concrete10.1061/(ASCE)0899-1561(1991)3:1(19) ↗
26. “The influence of aggregate type on the strength and abrasion resistance of high strength concrete”10.1016/j.cemconcomp.2007.05.011 ↗
27. ASTM C150, C150M · 2012
28. ASTM C618 · 2012
29. ASTM C989/C989M, “Standard Specification for Slag Cement for Use in Concrete and Mortars,” ASTM International, West Conshohocken, PA, USA, 2014.
30. ASTM C1240, “Standard Specification for Silica Fume Used in Cementitious Mixtures,” ASTM International, West Conshohocken, PA, USA, 2015.
31. ASTM C494/C494M-13, “Standard Specification for Chemical Admixtures for Concrete,” ASTM International, West Conshohocken, PA, USA, 2013.
32. EFNARC, “The European Guidelines for Self-Compacting Concrete Specification, Production and Use.” English ed. Norfolk, UK: European Federation for Specialist Construction Chemicals and Concrete Systems, 2005.
33. Mechanical properties of self-consolidating concrete containing lightweight recycled aggregate in different mixture compositions10.1016/j.jobe.2015.09.005 ↗
34. Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis10.1016/j.conbuildmat.2014.12.010 ↗
35. ASTM C39/C39M · 2011
36. ASTM C672/C672M, “Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals,” ASTM International, West Conshohocken, PA, USA, 2012.
37. ASTM C944 · 2012
38. ASTM C418 · 2012
39. ACI 544.2R-89, “Measurement of properties of fiber reinforced concrete.” West 481 Conshohocken, PA, USA, 1999.
40. J. A. Larbi, “Microstructure of the Interfacial Zone around Aggregate Particles in Concrete,” NASA STI/Recon Technical Report N94, 1993.
41. A review of salt scaling: I. phenomenology10.1016/j.cemconres.2007.03.005 ↗